基于Pro/E及VB的注射模设计动态演示系统

分析了基于Pro／E Wildfire的注射模设计的基本流程,构建了动态演示系统的功能模型,并以VB6．0为主要开发工具开发了动态演示系统。     

He Ⅱ常流体粘度实验测量技术研究进展

目前还没有现成的理论可以对He Ⅱ粘度进行合理的说明和计算,在大多数情况下还只能依靠实验技术来满足其工程需要.本文对传统实验技术,目前出现的各种改进型实验技术进行了概述,事实表明不同的实验技术所得的结果之间偶有符合,但不能从根本上解决He Ⅱ粘度对实验技术的依赖性,目前的实验技术还无法提供He Ⅱ粘度数值的一致性结论.但是通过对He Ⅱ粘度与温度之间的变化趋势、数值的数量级等方面的分析,证明了He Ⅱ粘度在1.6 K～1.8 K之间形成了最小值区域.当温度继续低于1.6 K时,He Ⅱ粘度会迅速增加,同样在温度高于1.8 K时,随着温度的增加,He Ⅱ粘度也会迅速增加.     

快速凝固Ni-Mo-Cr-B合金粉末的显微组织

运用 X 光,金相和透射电镜等显微分析技术观察分析了快速凝固 Ni-Mo-Cr-B 台金粉未的凝固组织,研究结果表明,粉未尺寸由大到小,其组织经历了共晶、枝晶,胞晶和非晶等一系列演变,高硼含量有助于非晶形成。     

Fabrication of Cu(In,Ga)Se2 thin films by ion beam sputtering deposition from a quaternary target at different substrate temperatures

Cu(In, Ga)Se₂ (CIGS) thin films were fabricated by ion beam sputtering deposition from a single quaternary target at different substrate temperatures (T _sub). The thin films were characterized with X-ray diffractometry, scanning electron microscopy, energy-dispersive X-ray spectroscopy and four-point probe technique to study the microstructures, surface morphology, composition and electrical properties, respectively. The results show that the films grown above 400?°C are of chalcopyrite structure. Cu(In_0.7Ga_0.3)Se₂ thin film was obtained when T _sub is 550?°C. The Cu and Se atomic percentage when T _sub is above 500?°C is higher than when T _sub is below 500?°C. With the increase in T _sub, the surfaces morphology of the films is denser and the resistivity of the films decreases.     

Analysis of the drude model in metallic films

A method, believed to be new, to simulate Drude parameters for collective oscillation of the free carriers in metallic films is proposed. Plasma resonance frequency and relaxation were simulated simultaneously from both the real and the imaginary parts of the dielectric function of a metallic film after consideration of their correlation in the Drude model. As examples, the contributions of the electrons in Ag films and of the free carriers in metallic silicide, NbSi(2) and TaSi(2), films have been studied.     

Enhanced π–π Interactions of Nonfullerene Acceptors by Volatilizable Solid Additives in Efficient Polymer Solar Cells

Fine‐tuning of the nanoscale morphologies of the active layers in polymer solar cells (PSCs) through various techniques plays a vital role in improving the photovoltaic performance. However, for emerging nonfullerene (NF) PSCs, the morphology optimization of the active‐layer films empirically follows the methods originally developed in fullerene‐based blends and lacks systematic studies. In this work, two solid additives with different volatilities, SA‐4 and SA‐7, are applied to investigate their influence on the morphologies and photovoltaic performances of NF‐PSCs. Although both solid additives effectively promote the molecular packing of the NF acceptors, due to the higher volatility of SA‐4, the devices processed with SA‐4 exhibit a power conversion efficiency of 13.5%, higher than that of the control devices, and the devices processed with SA‐7 exhibit poor performances. Through a series of detailed morphological analyses, it is found that the volatilization of SA‐4 after thermal annealing is beneficial for the self‐assembly packing of acceptors, while the residuals due to the incomplete volatilization of SA‐7 have a negative effect on the film morphology. The results delineate the feasibility of applying volatilizable solid additives and provide deeper insights into the working mechanism, establishing guidelines for further material design of solid additives.     

Study on the Ballistic Performance of Multiply Wadded Through-the-thickness Angle-interlock Fabric Reinforced Composites

Applied Composite Materials - The paper presents a study on the ballistic performance of 3D woven wadded through-the-thickness angle-interlock fabrics (TTAI) fabric reinforced composites. Their...