Improvement of residual compressive strength and spalling resistance of high-strength RC columns subjected to fire

This paper investigates the spalling properties of high-strength concrete in order to improve the residual compressive strength and spalling resistance in specimens subjected to 3 h of unloading fire conditions. This study consists of three series of experiments with eighteen different specimens varying in fiber type and content, finishing material and simultaneous fiber content and lateral confinement. They were fabricated to a 300 × 300 × 600 mm mock-up size. Results of the fire test showed that the control concrete was explosive, while the specimens that contained more than 0.1 vol% of polypropylene (PP) and polyvinylalcohol (PVA) fibers were prevented from spalling. One specimen, finished by a fire endurance spray, exhibited even more severe spalling than the control concrete. The specimen containing 0.1 vol% of PP fiber and using a confining metal fabric at the same time, showed the most effective spalling resistance; in particular, the residual compressive strength ratio was even higher than that of the control concrete before the fire test. It was demonstrated that adding fibers in concrete prevented the spalling occurrence and confining metal fabric around the main bars of concrete specimens can secure the strength of structures during the conditions of elevated temperature.     

Regioselective Synthesis of 1,2‐ and 1,4‐Dihydroquinolines by Palladium‐Catalyzed Intramolecular N‐Arylation

A series of 1,2‐ and 1,4‐dihydroquinolines has been successfully prepared. The Pd‐catalyzed intramolecular N‐arylation of Z‐enamines, formally prepared by the Horner–Wadsworth–Emmons olefination, proceeded efficiently to furnish the cyclized products. Depending on the cyclization conditions, substituted 1,4‐dihydroquinolines and further isomerized 1,2‐dihydroquinolines were independently obtained in high yields with an excellent control of isomerization of the double bond.

     

Recent Progress of Innovative Perovskite Hybrid Solar Cells

Recently, innovative perovskite hybrid solar cells have attracted great interest in solar cell research fields, such as dye-sensitized solar cells, organic photovoltaics, thin-film solar cells, and silicon solar cells, because their device efficiencies are gradually approaching those of crystalline Si solar cells, and they can be fabricated by cheap low-temperature solution processes. Here, we review the recent progress of innovative perovskite hybrid solar cells. The introduction includes the general concerns about solar cells and why we need innovative solar cells. The second part explains the structure and the material properties of hybrid perovskite materials. We focus on why the hybrid perovskite materials can exhibit excellent solar cell properties, such as high open-circuit voltage. The third part introduces recent progress in innovative perovskite hybrid solar cells, in terms of device architecture and deposition methods for dense perovskite thin films with full surface coverage. The device architecture is important in attaining high power conversion efficiency; the device operating mechanism is dependent on the device structure; and the pinhole-free dense perovskite thin films with full surface coverage are crucial for achieving high efficiency. Finally, we summarize the recent progress in perovskite hybrid solar cells, and the issues to be solved, in the summary and outlook section.     

Band Gap and Diameter Modulation of Quantum Dots in Glasses

Modulation of the band gap energy and diameter of quantum dots (QDs) formed in glasses is important to achieve the optimized performance for applications as infrared light sources, lasers, saturable absorbers, etc. Absorption and photoluminescence of PbS QDs were extended into mid-infrared wavelength range in glasses containing small amount of lead but oversaturated with sulfur. Dual-band photoluminescence of PbSe QDs was prepared in oxyfluoride glass-ceramics containing BaF₂ nanocrystals. By introducing SnO in the glasses, alloyed Pb_1-xSn_xSe QDs with smaller band gap energies were formed in glasses, and mid-infrared photoluminescence of Pb_1-xSn_xSe QDs at ~2570 nm in wavelength was achieved.     

Wear resistance characteristics of materials used in oil sands plants

The surge in demand for natural resources has shifted the focus of the international community toward the development of oil sands, shale oil, shale gas and other non-traditional energy sources. In extreme environments, materials used in petroleum gas plant modules are accompanied by various problems caused by low-temperature brittleness such as damage, corrosion and wear. Many researchers have been conducting studies to discover a suitable material whose lifespan could be improved by performing characteristics analyses and performance assessments. In this study, a material characteristics assessment was conducted based on a wear resistance test on materials that are commonly used at oil sands plants. Prior to a wear resistance test, a chemical composition analysis was performed on each of the specimens, and tensile, impact, hardness and corrosion tests were carried out to examine the correlation between their results with the results of the wear resistance test. Each test was performed according to ASTM G 105 standards, and the change in weight according to wear length was analysed for each material to determine the related tendencies. In addition, the results of the wear test were derived by analysing the change in the mass of the specimen before and after the test, and the surface roughness was assessed to analyse the performance related to wear and define the service life. The aim was to use these results to select a material that would be suitable for the abrasive environment of the key equipment and materials of plants.     

Quantitative analysis of microbial community structure in two-phase anaerobic digesters treating food wastewater

An acidogenic reactor with a 0.5-L working volume and a methanogenic digester with a 5-L of working volume were operated for 150 days on a continuous mode to investigate the structure of a microbial community during food wastewater treatment. During the steady state of anaerobic digestion, volatile solids (VS) removal efficiency in the pilot plant was approximately 65%. The bacterial population was higher than any other methanogens detected during the entire anaerobic process and treatment of raw food wastewater. Methanomicrobiales (MMB), Methanosarcinales (MSL), and Methanobacteriales (MBT) were detected during digestion. The methanogenic population present in the acidogenic reactor was directly affected by the archaeal community in raw food wastewater. However, the shift of microbial community in the methanogenic digester was relatively gradual. The performance of methanogenic digester might be more related to the change of microbial metabolism affected by the physicochemical properties of the input substrate.     

A rapid method for the simultaneous determination of 25 anti-hypertensive compounds in dietary supplements using ultra-high-pressure liquid chromatography

A novel, stable, simple and specific ultra-performance liquid chromatography method with ultraviolet detection (205 nm) for the simultaneous analysis of 25 anti-hypertensive substances was developed. The method was validated according to the International Conference of Harmonisation guidelines with respect to linearity, accuracy, precision, limit of detection (LOD), limit of quantitation (LOQ) and stability. From the ultra-performance liquid chromatography results, we identified the LOD and LOQ of solid samples to be 0.20–1.00 and 0.60–3.00 μg ml^?1, respectively, while those of liquid samples were 0.30–1.20 and 0.90–3.60 μg ml^?1, respectively. The linearity exceeded 0.9999, and the intra- and inter-day precisions were 0.15–6.48% and 0.28–8.67%, respectively. The intra- and inter-day accuracies were 82.25–111.42% and 80.70–115.64%, respectively, and the stability was lower than 12.9% (relative standard deviation). This method was applied to the monitoring of 97 commercially available dietary supplements obtained in Korea, such as pills, soft capsules, hard capsules, liquids, powders and tablets. The proposed method is accurate, precise and of high quality, and can be used for the routine, reproducible analysis and control of 25 anti-hypertensive substances in various dietary supplements. The work presented herein may help to prevent incidents related to food adulteration and restrict the illegal food market.