Performance of Sewage Sludge Treatment and Electricity Generation by Different Configuration Microbial Fuel Cells

This paper compared the degradation efficiency of sludge organic matters and electric-production by two typical microbial fuel cells——dual-chamber microbial fuel cell(DMFC)and single chamber air cathode microbial fuel cell(SAMFC),and the variations of sludge protein,polysaccharide and ammonia nitrogen within the systems were also investigated.The results showed that the concentration of sludge soluble chemical oxygen demand,protein and carbohydrate of DMFC are higher than these of SAMFC during the systems operation,while DMFC can achieve a better ammonia nitrogen removal than SAMFC.Under the same operation condition,the stable voltage output of DMFC and SAMFC is 0.61 V and 0.37 V;the maximum power density of DMFC and SAMFC is 2.79 W/m3and 1.25 W/m3;TCOD removal efficiency of DMFC and SAMFC is 34.14%and 28.63%for 12 d,respectively.Meanwhile,DMFC has a higher coulomb efficiency than SAMFC,but both are less than5%.The results showed that DMFC present a better performance on sludge degradation and electric-production.     

The oxidation state of sulfur detected in Na2O-CaO-SiO2 float glass by X-ray absorption near edge structure spectra

The oxidation state of sulfur is detected in Na2O-CaO-SiO2 float glass by synchrotron radiation X-ray absorption near edge structure (XANES) spectra at the sulfur K edge. The measured spectra show the only presence of S6+ in the Na2O-CaO-SiO2 float glass and the oxidation state of sulfur do not change with the increase of glass depth. It is also found that, after the melt has gone through the molten tin bath, the S6+ is the dominant species, but S2- is also present on both surfaces. It is not certain whether cation bonds to S2- or not, because there are many cations dissolved in the melted tin which makes the spectrum complicated.     

改性高岭土上甲苯的选择性硝化(IV)

应用Ｍｅｎｋｅ条件，在改性高岭土固体酸催化下，甲苯能被浓硝酸对位选择性硝化，表现在对邻硝化产物比例达到１．５。     

Grigorii Valentinovich Samsonov

Obituaries

Grigorii Valentinovich Samsonov     

X-ray photoelectron spectroscopy characterization of the interface between Ag electrode and PVDF film treated by electric poling

Interface changes induced by electric poling treatment between an Ag electrode deposited by vacuum thermal evaporation and a polymer thin film have been investigated. The polymer film poly (vinylidene fluoride) (PVDF), a fluoropolymer of repeat unit (–CH₂–CF₂–) was treated under electric poling at high temperature of 90°C. The characterization was accomplished using X-ray photoelectron spectroscopy (XPS) as a primary tool. The results indicate that the piezoelectricity of PVDF thin films and adhesion force between polymer thin film and metallic electrode are improved by electric poling and chemical bond joint.     

介孔分子筛孔尺寸表征方法比较

MCM-41是由表面活性剂十六烷基三甲基溴化铵为模板剂经水热合成，550℃煅烧5h制备的规则硅质六方介摘要孔材料；Ti-MCM-41是在MCM-41的基础上，将Ti离子涂敷引入到MCM-41的介孔中合成的。该类材料孔尺寸的表征方法有N2吸附、透射电镜TEM、SAXS等，其中N2吸附、透射电镜是传统的介孔尺寸的表征方法，SAXS是近年新的介孔尺寸的表征方法。比较了Ti-MCM-41材料的孔尺寸的表征方法，得出：SAXS得到的Ti-MCM-41孔径与TEM照片的结果符合较好，但与N2吸附的结果偏差较大。SAXS、TEM、N2吸附-脱附等温线给出的Ti-MCM-41的平均孔径分别为2.00nm、2.15nm、3.60nm。     

基于家庭的DV节目制作

利用普通计算机设备,通过系统规划、选择恰当的编辑软件、采用合理的编辑步骤与技巧,把握制作规律、就能制作出高质量的家庭纪念光盘.