热流法计算高温炉内辐射传热

高温炉内的辐射传热是工业生产中常遇到的问题。过去，人们在应用热流法计算辐射传热时遇到了一定的困难，使计算结果与实际有一定的偏差。本文运用文献［１］中给出的新热流数学模型，开发出由新热流方程与能量方程相耦合的计算机程序，其中的比热流参数由线加热热源情况下计算得到。用该程序计算了实验室用马弗炉内的温度场，并且用热电偶实测了炉内的一些温度值，理论计算与实测值符合很好。     

一种实验炼钢渣的穆斯堡尔谱研究

一种实验炼钢渣不同炉次样品的室温透射穆斯堡尔谱由两组裂距较大的四极分裂双峰和一组裂距较小的双峰组成，它们分别相应于具有不同微观环境的Ｆｅ＾２＋和Ｆｅ＾３＋。参照文献中已知ＦｅｘＯ的穆斯堡尔谱数据，可确定该渣中的主要含铁相为ＦｅｘＯ。Ｘ射线衍射相分析给出相同的结果。按亚谱的面积比计算出Ｆｅ＾２＋和Ｆｅ＾３＋的相对含量分别为８５％和１５％左右。进一步选取与样品晶体结构相联系的原子簇模型。用ＭＳ－Ｘａ方     

几种高强度钢腐蚀疲劳裂纹扩展行为的研究

本文研究了ＧＣ－４，３０ＣｒＭｎＳｉＮｉ２Ａ和３００Ｍ超高强钢的腐蚀疲劳裂纹扩展行为。考虑了环境，热处理制度，应力比和频率对裂纹扩展的影响。研究结果表明：腐蚀环境和热处理制度对疲劳裂纹扩展有显著影响。在侵蚀性环境中随频率降低，裂纹扩展大幅度上升，随应力比提高，环境影响加剧。利用扫描电镜对试样断口形貌进行了分析，并讨论了高强钢的腐蚀疲劳机理。     

β—BBO晶体的电光性能

用干涉法测量了β－ＢＢＯ晶体的电光系数：γ２２＝２．６，γ３３＝０．２３，γ３１＝０．２５，γ５１＝－３．５×１０－１２ｍ／Ｖ。结果表明如果在Ｙ方向加电场，Ｚ方向通光，β—ＢＢＯ晶体可能制作成有应用价值的光开关。     

一种双光束自动测试光栅绝对与相对光谱衍射效率的原理性方案

提出了一种快速自动测试光栅光谱衍射效率的新方法。重点推导了测试平面光栅绝对光谱衍射效率与相对光谱衍射效率公式，介绍了双光束高精度自动测试光栅光谱衍射效率曲线的基本原理、方案与方法，并分析了测试精度。研究表明，本方案的测试速度和精度均比一般测试方法提高一倍，并能有效地消除光源波动对测量结果的影响，测量误差小于５×１０－３。     

The feature-based posterior crown design in a dental CAD/CAM system

This paper presents a newly developed CAD approach for a quick and accurate design of a dental posterior prosthesis. The approach arises from the basic idea that every human tooth has its own specific features. Based upon the features of the standard posterior tooth, the initial data containing the defined feature points are firstly acquired from the scanned points of the standard tooth. The standard prosthetic profile is thereby formulated using the bicubic Nurbs surface fitting technique. This profile has the two functions of possessing the same features with the patient’s missing posterior tooth, and the adjustability with the feature points and the defined B-spline profile feature curves. For the purpose of the adjustment of the established model, the global and occlusal feature curves are proposed considering the individual patient’s original information. According to these curves, the corresponding standard prosthetic profile is locally adjusted to meet the fit of the global size and occlusal surface. Finally, a close and continuous profile of a posterior crown is generated. Using this design, a posterior prosthesis is successfully manufactured in the computer-aided machining process.     

岩溶地区设计洪水计算的探讨

岩溶地区溶洞形状千姿百态，对洪水的影响程度各不相同，如何考虑其影响，在目前的水利水电工程设计规范中没有明确规定。贵州省是世界上典型的岩溶地貌地区之一，根据在贵州省水利水电工程设计的实践，总结摸索出针对不同溶洞状况、集水状况和水文站布设情况的设计洪水计算方法。在可确定岩溶集水面积条件下的方法有调洪演算法、溶洞削减法、叠加合成法和统一处理法；不能确定岩溶集水面积条件下的方法有流量法、地区综合法、统一处理法等。     

Network traffic prediction based on a new time series model

Fast and accurate methods for predicting traffic properties and trend are essential for dynamic network resource management and congestion control. With the aim of performing online and feasible prediction of network traffic, this paper proposes a novel time series model, named adaptive autoregressive (AAR). This model is built upon an adaptive memory‐shortening technique and an adaptive‐order selection method originally developed by this study. Compared to the conventional one‐step ahead prediction using traditional Box–Jenkins time series models (e.g. AR, MA, ARMA, ARIMA and ARFIMA), performance results obtained from actual Internet traffic traces have demonstrated that the proposed AAR model is able to support online prediction of dynamic network traffic with reasonable accuracy and relatively low computation complexity. Copyright © 2005 John Wiley & Sons, Ltd.     

液态混合有机标准物质研究

本研究采用重量法配制有机液态混合标样 ,并对配制方法、混合标样的均匀性、稳定性及影响不确定度的因素进行了研究 ,并用气相色谱法进行了比对分析。经稳定性监测 ,稳定度大于等于一年 ,不确定度小于± 2 %。     

La doping effects on intergrowth Bi2WO6–Bi3TiNbO9 ferroelectrics

La doping effects on intergrowth Bi₂WO₆–Bi₃TiNbO₉ ferroelectric ceramics were studied by X-ray diffraction, electron probe microanalysis and dielectric spectroscopy. It was found that the La³⁺ distribution, ferroelectric phase transition and dielectric relaxation behavior are apparently affected by La doping. With increasing La³⁺ content, the site of dopant ion varies, the grain growth of Bi₅TiNbWO₁₅ is restrained, the Curie temperature is reduced and broadened. Furthermore, two dielectric relaxation loss peaks were observed both in temperature and frequency spectra. The calculated relaxation parameters revealed the oxygen vacancy related to the relaxation process.