Indene epoxidation over immobilized methyltrioxorhenium on MCM-41 silica,fumed silica and aluminosilicate materials

The presented report focuses on the testing of heterogenized methyltrioxorhenium (MTO) in indene epoxidation. A range of mesoporous materials with different SiO₂/Al₂O₃ ratios, namely aluminosilicates type Siral and MCM-41 silica and fumed silica, were used as supports for immobilization of MTO. The tested support materials and prepared catalytic systems exhibited high surface area, well-defined regular structure and narrow pore size distribution of mesopores and therefore represent good quality catalysts for various reactions. The immobilized MTO on various supports was tested for the preparation of 1,2-epoxyindane using two forms of hydrogen peroxide as oxidation agents, namely aqueous solution of hydrogen peroxide and its anhydrous form, urea-hydrogen peroxide. The prepared catalysts were successfully used for the preparation of 1,2-epoxyindane with achieved 100 % selectivities to the desired product at high conversions of indene.     

Variable narrowband transmission filters with a wide rejection band for spectrometry

Variable narrowband transmission filters are useful for the development of compact spectrometers. For this purpose the filter should be directly coupled to the detector and the wavelength of the transmission peak should move in one surface direction over a length of a few millimeters. To obtain both a wide measurement spectrum and high accuracy, the ratio of extreme operating wavelengths is required to be greater than 2:1 and the width of the transmission band narrower than 10 nm. A metal-dielectric variable transmission filter, with an operating range of 400-1000 nm, is proposed. The method for obtaining variable transmission filters, with dimensions of a few millimeters, is described.     

A Novel Nanoprobe for Multimodal Imaging Is Effectively Incorporated into Human Melanoma Metastatic Cell Lines

To facilitate efficient drug delivery to tumor tissue, several nanomaterials have been designed, with combined diagnostic and therapeutic properties. In this work, we carried out fundamental in vitro and in vivo experiments to assess the labeling efficacy of our novel theranostic nanoprobe, consisting of glycogen conjugated with a red fluorescent probe and gadolinium. Microscopy and resazurin viability assays were used to study cell labeling and cell viability in human metastatic melanoma cell lines. Fluorescence lifetime correlation spectroscopy (FLCS) was done to investigate nanoprobe stability. Magnetic resonance imaging (MRI) was performed to study T₁ relaxivity in vitro, and contrast enhancement in a subcutaneous in vivo tumor model. Efficient cell labeling was demonstrated, while cell viability, cell migration, and cell growth was not affected. FLCS showed that the nanoprobe did not degrade in blood plasma. MRI demonstrated that down to 750 cells/μL of labeled cells in agar phantoms could be detected. In vivo MRI showed that contrast enhancement in tumors was comparable between Omniscan contrast agent and the nanoprobe. In conclusion, we demonstrate for the first time that a non-toxic glycogen-based nanoprobe may effectively visualize tumor cells and tissue, and, in future experiments, we will investigate its therapeutic potential by conjugating therapeutic compounds to the nanoprobe.     

Bestimmung des Grenzumformgrades mit dem Torsionsversuch

Die Bestimmung des Grenzumformgrades eines Stahles, der während der plastischen Verformung nicht überschritten werden kann, ist von großer Bedeutung. Die vorliegende Arbeit berichtet über Ergebnisse von Warmtorsionsversuchen, aus denen der Grenzumformgrad als Funktion von Temperatur und Umformgeschwindigkeit ermittelt wurde. Die Versuche wurden an den Stählen X 10 CrNiTi 18 9, 10 CrMo 9 10, X 10 CrNiMoTi 18 12, X 20 CrMoV 12 1 und X 2 NiCrNb 25 18 durchgeführt.     

Case Study: Refinement of Hydraulic Operation of a Complex CSO Storage/Treatment Facility by Numerical and Physical Modeling

The performance of a combined sewer overflow (CSO) storage/treatment facility in North Toronto, Ont., Canada, was investigated by conjunctive numerical and physical (hydraulic) modeling. The main objectives of the study were to (1) assess the feasibility of increasing the hydraulic loading of the CSO facility without bypassing; and (2) establish a verified numerical model of the facility for future work. The numerical model [a commercial computational fluid dynamics (CFD), PHOENICS] was validated and verified using results from a hydraulic scale model (1:11.6). The results obtained show that the CFD model can simulate hydraulic conditions in the facility well, as demonstrated by accurate reproduction of the filling rate, water levels at various locations, flow velocities in feed pipes, and overflows from the inflow channel. Numerical simulations identified excessive local head losses and helped select structural changes to reduce such losses. The analysis of the facility showed that with respect to hydraulic operation, the facility is a complex, highly nonlinear hydraulic system. Within the existing constraints, a few structural changes examined by numerical simulation could increase the maximum treatment flow rate in the CSO storage/treatment facility by up to 31%.     

Throughput bounds for closed queueing networks

Analytical lower and upper bounds for the throughput of closed queueing networks with single and delay (infinite) servers are studied in this paper. The numerical evaluation of these bounds requires a small number of significant operations which is independent of the population N. This is in contrast to the exact computation of the throughput which requires at least O(N) operations as N tends to infinity. The bounds are given by simple closed-form analytical expressions and may be more suitable for various performance studies than the algorithmical form of the exact solution.In this paper, the previously known balanced-job bounds are generalized to networks containing delay servers (terminals) and a hierarchy of bounds is obtained for single and multiple class networks. For the single class network, further new bounds are derived: lower and upper bounds that require the evaluation of one square root and an upper bound that requires a constant number of exponentiations. This upper bound does not employ the balancing of server loadings and is especially useful for asymptotic analysis in the case of a large number of customers N.     

Transmission parameters of a class of coupled distributed networks

It is shown how the equations of a class of coupled distributed networks can be decoupled, and their transmission parameters expressed in terms of those of an equivalent scalar system.     

Dietary sitostanol and campestanol: Accumulation in the blood of humans with sitosterolemia and xanthomatosis and in rat tissues

Dietary sitostanol has a hypocholesterolemic effect because it decreases the absorption of cholesterol. However, its effects on the sitostanol concentrations in the blood and tissues are relatively unknown, especially in patients with sitosterolemia and xanthomatosis. These patients hyperabsorb all sterols and fail to excrete ingested sitosterol and other plant sterols as normal people do. The goal of the present study was to examine the absorbability of dietary sitostanol in humans and animals and its potential long-term effect. Two patients with sitosterolemia were fed the margarine Benecol (McNeill Nutritionals, Ft. Washington, PA), which is enriched in sitostanol and campestanol, for 7–18 wk. Their plasma cholesterol levels decreased from 180 to 167 mg/dL and 153 to 113 mg/dL, respectively. Campesterol and sitosterol also decreased. However, their plasma sitostanol levels increased from 1.6 to 10.1 mg/dL and from 2.8 to 7.9 mg/dL, respectively. Plasma campestanol also increased. After Benecol withdrawal, the decline in plasma of both sitostanol and campestanol was very sluggish. In an animal study, two groups of rats were fed high-cholesterol diets with and without sitostanol for 4 wk. As expected, plasma and liver cholesterol levels decreased 18 and 53%, respectively. The sitostanol in plasma increased fourfold, and sitostanol increased threefold in skeletal muscle and twofold in heart muscle. Campestanol also increased significantly in both plasma and tissues. Our data indicate that dietary sitostanol and campestanol are absorbed by patients with sitosterolemia and xanthomatosis and also by rats. The absorbed plant stanols were deposited in rat tissues. Once absorbed by sitosterolemic patients, the prolonged retention of sitostanol and campestanol in plasma might increase their atherogenic potential.     

Oxidized cellulose: An application in the form of sorption filter materials

Oxidized cellulose (oxycellulose) was very effectively used in the form of filter sheets to remove some metal ions from water and from aqueous solutions. Furthermore, oxycellulose was applied in an ion‐exchange column and in a batch process. The mechanisms of the sorption process inside oxycellulose as well as the kinetics of sorption were studied. A comparison of oxycellulose and other adsorption components such as zeolites and ion‐exchange resins was made. The affinity of oxycellulose to metal ions was determined to be in the following order: Cd²⁺, Zn²⁺ > Ni²⁺ ? Ca²⁺ > Mg²⁺ ? Na⁺. The use of oxycellulose was very effective, especially in the form of sorption filters, because this allowed us to use a simple filtration process. Moreover, the specific loading amount of the filter cake was higher for filtration than for the column process under comparable conditions. Oxycellulose in a glass column behaved similarly to an ion‐exchange resin. It showed approximately constant efficiency until the sorption capacity of the adsorbent was exhausted, and then it suddenly dropped. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009