Eucalyptol is an Attractant of the Redbay Ambrosia Beetle,Xyleborus Glabratus

The redbay ambrosia beetle, Xyleborus glabratus, is an invasive wood-boring beetle that has become established in the southeastern United States. The beetle transmits the causal pathogen of lethal laurel wilt to susceptible host trees, which include redbay, an important forest community species, and avocado, a valuable food crop. By examining odors of redbay wood, we developed an artificial lure that captured X. glabratus in redbay forests. Eucalyptol was a critical component of the blend for beetle attraction, and eucalyptol alone in large quantities attracted X. glabratus. Furthermore, eucalyptol stimulated boring by X. glabratus into paper arenas. The results suggest that eucalyptol contributes to host selection behavior of X. glabratus and may be useful for management of this pathogen vector.     

Methacrylate hydrogels reinforced with bacterial cellulose

Composite hydrogels consisting of nanofibrous bacterial cellulose (BC) embedded in a biocompatible polymeric matrix of various methacrylates were synthesized by UV polymerization using the ‘ever‐wet’ technique. The effect of monomer(s) type and ratio, system dilution at polymerization, monomer(s) hydrophilicity, crosslink density and cellulose/hydrogel ratio was investigated. The effect of BC reinforcement on equilibrium swelling depends on whether the neat gel swells more when brought into contact with water. The major improvement achieved by introduction of 1%–2% BC concerns mechanical properties. Compared with neat gels, the storage shear modulus G′ increased by a factor 10‐20, and the loss part G″ also rose significantly. The compression modulus ranged from 2 to 5.5 MPa for composites swollen to equilibrium (20‐70 wt% water). The BC‐hydrogel composites are considered for application in the tissue engineering area. Copyright © 2012 Society of Chemical Industry     

CFD Process Modeling of the Industrial Calcination of Diatomite

Calcination of diatomite is an expensive process frequently resulting in products with unpredictable structure. Alternatively, calcination in swirling flow is an energy‐saving option. Computational fluid dynamics modeling of an experimental calcination process unit is presented. Experimental results and systematic collection of process data were used to define boundary condition for steady‐state and transient simulation runs. The comparison of experimental and simulation results shows the complexity of the calcination process. The results can be used for further process optimization.     

Interaction of Cucurbit[7]uril with Oxime K027, Atropine,and Paraoxon: Risky or Advantageous Delivery System?

Antidotes against organophosphates often possess physicochemical properties that mitigate their passage across the blood–brain barrier. Cucurbit[7]urils may be successfully used as a drug delivery system for bisquaternary oximes and improve central nervous system targeting. The main aim of these studies was to elucidate the relationship between cucurbit[7]uril, oxime K027, atropine, and paraoxon to define potential risks or advantages of this delivery system in a complex in vivo system. For this reason, in silico (molecular docking combined with umbrella sampling simulation) and in vivo (UHPLC—pharmacokinetics, toxicokinetics; acetylcholinesterase reactivation and functional observatory battery) methods were used. Based on our results, cucurbit[7]urils affect multiple factors in organophosphates poisoning and its therapy by (i) scavenging paraoxon and preventing free fraction of this toxin from entering the brain, (ii) enhancing the availability of atropine in the central nervous system and by (iii) increasing oxime passage into the brain. In conclusion, using cucurbit[7]urils with oximes might positively impact the overall treatment effectiveness and the benefits can outweigh the potential risks.     

Reversible Amorphous‐to‐Amorphous Transitions in Chalcogenide Films: Correlating Changes in Structure and Optical Properties

Structural transitions in materials are accompanied by appreciable and exploitable changes in physical‐chemical properties. Whereas reversible optically‐driven atomistic changes in crystal‐to‐amorphous transitions are generally known and exploited in applications, the nature of the corresponding polyamorphic transitions between two structurally distinct meta‐stable amorphous phases is an unexplored theme. Direct experimental evidence is reported for the nature of the atomistic changes during fully reversible amorphous‐to‐amorphous switching between two individual states in the non‐crystalline As₅₀Se₅₀ films prepared by pulsed‐laser deposition and consequent changes in optical properties. Combination of surface sensitive X‐ray photoelectron spectroscopy and spectroscopic ellipsometry show that the near‐bandgap energy illumination and annealing induce reversible switching in the material's structure by local bonding rearrangements. This is accompanied by switching in refractive index between two well‐defined states. Exploiting the pluralism of distinct structural states in a disordered solid can provide new insights into the data storage in emerging optical memory and photonic applications.     

Elimination of irreversible effects during first charging of lithium battery anodes

The irreversible capacity of negative electrode in a lithium-ion cell is a widely described the phenomenon. Irreversible capacity losses are connected with formation of a solid electrolyte interface layer. This layer is growing on the electrode-electrolyte interface during first several charging cycles. The layer is indispensable for proper functioning of a lithium-ion cell. However, during this layer formation, the atoms of lithium are consumed in a range from 18 to 45% of the total amount of lithium atoms presented in cell. Demonstration of possibilities to suppress this phenomenon that occurs on a negative electrode interface is the main aim of this paper.     

Dyeing of leather with microencapsulated acid dye

CI Acid Black 210 was microencapsulated into liposomic systems, and the effects of the microencapsulation on dyebath exhaustion, depth of shade, colour fastness properties and through‐dyeing of chrome‐tanned leather were studied. In comparison with the original dyestuff form, the microencapsulated dye showed a deeper shade and a greater depth of through‐dyeing. Exhaustion and colour fastness values were the same.     

Phase and Microstructural Analysis of Hot Rolled FeNi42 Sheet,its Response in Magnetic and Mechanical Properties

Inclusions unavoidably existing in steels and consequently also in final products obtained by e.g. rolling markedly affects the physical properties. This paper is devoted to investigation of FeNi42 steel hot rolled into a sheet form. The structural and phase analysis is done by scanning electron microscopy, X‐ray diffraction, and Mössbauer spectroscopy completed by magnetic and hardness measurements. The results yield an inhomogeneous nickel distribution in the sheet resulting in a formation of the intermetallic Ni₃Fe phase. A depletion of sheet surface by nickel leads to an intensive surface oxidation; its thickness increases in the direction of sheet edges. The non‐metallic oxide inclusions are concentrated predominantly at grain boundaries, which contribute to an easier cracking. The formation of Ni₃Fe affects a small increase in saturation magnetization. The oxides and consequently cracks formation cause magnetic hardening as can be seen on an increase of the structurally sensitive remnant magnetization. The hard oxide inclusions evoke also the hardening of material, rise brittleness and crack liability.