Optical BGP Routing Convergence in Lightpath Failure of Optical Internet

Optical Border Gateway Protocol (OBGP) is an extension to BGP for Optical Cross Connects (OXCs) to automatically setup multiple direct optical lightpaths between many different autonomous domains. With OBGP, the routing component of a network may be distributed to the edge of the network while the packet classification and forwarding is done in the core. However, it is necessary to analyze the stable convergence functions of OBGP in case of lightpath failures. In this paper, we first describe the architecture of the OBGP model and analyze the potential problems of OBGP, e.g., virtual BGP router convergence behavior in the presence of lightpath failure. We then propose an OBGP convergence model derived from an inter‐AS (Autonomous System) relationship. The evaluation results show that the proposed model can be used for a stable OBGP routing policy and OBGP routing convergence under lightpath failures of the optical Internet.     

Design and Architecture of Low‐Latency High‐Speed Turbo Decoders

In this paper, we propose and present implementation results of a high‐speed turbo decoding algorithm. The latency caused by (de)interleaving and iterative decoding in a conventional maximum a posteriori turbo decoder can be dramatically reduced with the proposed design. The source of the latency reduction is from the combination of the radix‐4, center to top, parallel decoding, and early‐stop algorithms. This reduced latency enables the use of the turbo decoder as a forward error correction scheme in real‐time wireless communication services. The proposed scheme results in a slight degradation in bit error rate performance for large block sizes because the effective interleaver size in a radix‐4 implementation is reduced to half, relative to the conventional method. To prove the latency reduction, we implemented the proposed scheme on a field‐programmable gate array and compared its decoding speed with that of a conventional decoder. The results show an improvement of at least five fold for a single iteration of turbo decoding.     

A sub-space method to detect multiple wireless microphone signals in TV band white space

The main hurdle in the realization of dynamic spectrum access systems from the physical layer perspective is the reliable sensing of low power licensed users. One such scenario shows up in the unlicensed use of the TV bands where the TV band devices are required to sense extremely low power wireless microphones (WMs). The lack of technical standards among various wireless manufacturers and the resemblance of certain WM signals to narrow-band interference signals, such as spurious emissions, further aggravate the problem. Due to these uncertainties, it is extremely difficult to abstract the features of WM signals and hence develop robust sensing algorithms. To partly counter these challenges, we develop a two-stage sub-space algorithm that detects multiple narrow-band analog frequency-modulated signals generated by WMs. The performance of the algorithm is verified by using the real WM signals experimentally captured under low SNR conditions. The problem of differentiating between the WM and other narrow-band signals is left as future work.     

Novel Hybrid Content Synchronization Scheme for Augmented Broadcasting Services

As a new hybrid broadcasting service, augmented broadcasting shows enhanced broadcasting content on a large TV screen, while augmented reality (AR) on a mobile device augments additional graphical content onto an input image from the device's own camera to provide useful and convenient information for users. A one‐sided broadcasting service using AR has already been attempted in virtual advertisements during sport broadcasts. However, because its augmentation is preprocessed before the video image is transmitted, the viewer at home may have no influence on this formation; and no interaction for the user is possible unless the viewer has a direct connection to the content provider. Augmented broadcasting technology enables viewers to watch mixed broadcasting content only when they want such service and to watch original broadcasting content when they do not. To realize an augmented broadcasting service, the most important issue is to resolve the hybrid content synchronization over heterogeneous broadcast and broadband networks. This paper proposes a novel hybrid content synchronization scheme for an augmented broadcasting service and presents its implementation and results in a terrestrial DTV environment.     

Photomultiplication-Type Organic Photodetectors with High EQE-Bandwidth Product by Introducing a Perovskite Quantum Dot Interlayer

A photomultiplication (PM)-type organic photodetector (OPD) that exploits the ionic motion in CsPbI₃ perovskite quantum dots (QDs) is demonstrated. The device uses a QD monolayer as a PM-inducing interlayer and a donor–acceptor bulk heterojunction (BHJ) layer as a photoactive layer. When the device is illuminated, negative ions in the CsPbI₃ QD migrate and accumulate near the interface between the QDs and the electrode; these processes induce hole injection from the electrode and yield the PM phenomenon with an external quantum efficiency (EQE) >2000% at a 3 V applied bias. It is confirmed that the ionic motion of the CsPbI₃ QDs can induce a shift in the work function of the QD/electrode interface and that the dynamics of ionic motion determines the response speed of the device. The PM OPD showed a large EQE-bandwidth product >10⁶ Hz with a −3 dB frequency of 125 kHz at 3 V, which is one of the highest response speeds reported for a PM OPD. The PM-inducing strategy that exploits ionic motion of the interlayer is a potential approach to achieving high-efficiency PM OPDs.     

An Approach for Segmentation of Airborne Laser Point Clouds Utilizing Scan‐Line Characteristics

In this study, we suggest a new segmentation algorithm for processing airborne laser point cloud data which is more memory efficient and faster than previous approaches. The main principle is the reading of data points along a scan line and their direct classification into homogeneous groups as a single process. The results of our experiments demonstrate that the algorithm runs faster and is more memory efficient than previous approaches. Moreover, the segmentation accuracy is generally acceptable.     

The analysis and compensation of dead-time effects in PWM inverters

The quantitative prediction of the dead-time effect in pulse width modulated (PWM) inverters is addressed. Through analysis and simulation it is shown that the effect results in a decrease of the fundamental component and an increase in the low-order harmonics in the output voltage of the inverter. To compensate the effect, two simple methods, which are adequate for sinusoidal PWM and memory-based PWM, respectively, are presented. Experimental results show the validity of the analysis and the usefulness of the compensation methods     

Effects of Interfacial Dielectric Layers on the Electrical Performance of Top‐Gate In‐Ga‐Zn‐Oxide Thin‐Film Transistors

We investigate the effects of interfacial dielectric layers (IDLs) on the electrical properties of top‐gate In‐Ga‐Zn‐oxide (IGZO) thin film transistors (TFTs) fabricated at low temperatures below 200°C, using a target composition of In:Ga:Zn = 2:1:2 (atomic ratio). Using four types of TFT structures combined with such dielectric materials as Si₃N₄ and Al₂O₃, the electrical properties are analyzed. After post‐annealing at 200°C for 1 hour in an O₂ ambient, the sub‐threshold swing is improved in all TFT types, which indicates a reduction of the interfacial trap sites. During negative‐bias stress tests on TFTs with a Si3N4 IDL, the degradation sources are closely related to unstable bond states, such as Si‐based broken bonds and hydrogen‐based bonds. From constant‐current stress tests of Id = 3 µA, an IGZO‐TFT with heat‐treated Si₃N₄ IDL shows a good stability performance, which is attributed to the compensation effect of the original charge‐injection and electron‐trapping behavior.     

Analysis of adjacent channel interference using distribution function for V2X communication systems in the 5.9‐GHz band for ITS

Many use cases have been presented on providing convenience and safety for vehicles employing wireless access in vehicular environments and long‐term evolution communication technologies. As the 70‐MHz bandwidth in the 5.9‐GHz band is allocated as an intelligent transportation system (ITS) service, there exists the issue that vehicular communication systems should not interfere with each other during their usage. Numerous studies have been conducted on adjacent interfering channels, but there is insufficient research on vehicular communication systems in the ITS band. In this paper, we analyze the interference channel performance between communication systems using distribution functions. Two types of scenarios comprising adjacent channel interference are defined. In each scenario, a combination of an aggressor and victim network is categorized into four test cases. The minimum requirements and conditions to meet a 10% packet error rate are analyzed in terms of outage probability, packet error rate, and throughput for different transmission rates. This paper presents an adjacent channel interference ratio and communication coverage to obtain a satisfactory performance.     

Shorted Microstrip Patch Antenna Using Inductively Coupled Feed for UHF RFID Tag

A very small patch‐type RFID tag antenna (UHF band) using ceramic material mountable on metallic surfaces is presented. The size of the proposed tag is 25 mm×25 mm×3 mm. The impedance of the antenna can be easily matched to the tag chip impedance by adjusting the size of the shorting plate of the patch and the size of the feeding loop. The measured maximum reading distance of the tag at 910 MHz was 5 m when it was mounted on a 400 mm × 400 mm metallic surface. The proposed design is verified by simulation and measurements which show good agreement.