Rapid Small-Scale Column Tests for Arsenate Removal in Iron Oxide Packed Bed Columns

Arsenate breakthrough in column studies with a porous granular ferric hydroxide (GFH) was investigated in model waters and groundwaters. In this study, the use of rapid small-scale column tests (RSSCTs) initially designed for simulating the removal of organic compounds by granular activated carbon was extended for arsenate adsorption onto GFH. Adsorption kinetic studies and a comparison of laboratory RSSCT performance versus pilot-scale performance suggests that proportional diffusivity (PD) RSSCT scaling approaches are more valid than constant diffusivity (CD) approaches for arsenate onto GFH. Adsorption densities from column tests (qcolumn) were calculated at the point in the breakthrough curve when arsenate equaled 10 μg/L in the column effluent. For a simulated 2.5 min empty-bed contact time (EBCT), a model water (pH=8.6) had qcolumn values of 0.99 to 1.5 mgAs/gGFH versus 0.02 to 0.28 mgAs/gGFH with a comparable pH and EBCT in a natural groundwater. The differences were attributed to the silica, phosphate, vanadium, and other adsorbable inorganics in the groundwater. At pH 7.6 to 7.8, qcolumn values from PD-RSSCTs in the three natural waters were comparable (1.5±0.3 mgAs/gGFH) and higher than CD-RSSCT qcolumn values (0.57±0.26 mgAs/gGFH) in the three natural waters. All the RSSCTs captured changes in water quality (source water and pH) and operational regimes (e.g., EBCTs) and could be used to aid in the selection and design of arsenic removal media for full-scale treatment facilities.     

不同结构活性炭对甲苯的吸附性能

考察了不同结构的活性炭样品对高浓度和低浓度甲苯蒸汽的吸附行为,采用低温(77 K)氮气吸附和129Xe-核磁共振方法对所用活性炭的结构进行了表征.并将活性炭对甲苯的吸附性能与其结构进行了关联.结果表明孔容积大的活性炭对高浓度甲苯蒸汽吸附容量大,而具有丰富微孔和较小平均孔径的活性炭对低浓度(2×10-5)甲苯蒸汽具有高的吸附容量.沥青基活性炭纤维对低浓度(2×10-5)甲苯蒸汽表现出较好的吸附能力.随着比表面积的增大,活性炭纤维对低浓度(2×10-5)甲苯蒸汽的吸附容量略有增加.OG5A,OG10A,OG15A和OG20A在30 ℃下对2×10-5甲苯蒸汽的饱和吸附容量分别为202 mg/g,219 mg/g,221 mg/g和235 mg/g.     

Magnetically induced vibration in a permanent-magnet brushless DC motor with symmetric pole-slot configuration

The paper reports a numerical and experimental study of magnetically induced vibration associated with rotor/stator eccentricity and imperfect magnetization for 8-pole 6-slot symmetric brushless dc (BLDC) motors. Magnetic forces and cogging torque are calculated for various slot angles by using the finite-element method (FEM). The results show that there is an optimal slot angle for minimum cogging torque, but this slot angle is not optimal for reducing magnetic forces. In the idle acoustics test, the motors with reduced magnetic forces show clear reduction at the expected frequencies while the motors with minimum cogging torque show no change at the cogging torque frequency, which implies unbalanced magnetic forces have greater effect on actual vibration of the spindle motor than cogging torque. The results show that the proper direction in motor design is to reduce unbalanced magnetic forces when both cogging torque and unbalanced magnetic forces are not achievable simultaneously.     

Wear and dynamic properties of piezoelectric ultrasonic motor with frictional materials coated stator

Piezoelectric ultrasonic motors have been studied, developed and utilized by researchers and companies all over the world. Ultrasonic motors (USM) produce rotational motion based on traveling waves made by the resonant vibrations of piezoceramic. These motors have been recently developed and utilized in practical applications. The dynamic properties and life of piezoelectric ultrasonic motors are strongly related to the frictional material Fused on the sliding surface. In this study, effects of frictional material properties on the performances of piezoelectric ultrasonic motors are investigated. It was possible to improve the torque of a traveling wave type ultrasonic motor by stator's coating.     

Optimization of a piezoelectric linear motor in terms of the contact parameters

The contact kinetics of piezoelectric linear motors determines the operational characteristics like speed and torque or transmitted mechanical power and efficiency. Piezoelectric linear motors are driven by tangential stress in the interface between tip of shaking beam and slider. A good contact between the tip and slider is necessary for a reliable analysis of the motor, which is needed for the optimization of its performance. The piezoelectric linear motor was fabricated and the characteristics of the motor were investigated by external conditions such as tip shape with different curvatures and contact force between the tip and the slider. It was found in this investigation that the optimal curvature of the tip and the contact force are curvature of 1 and 10, respectively, for the high actuating speed, and curvature of 1 and 40 N, respectively, for the high actuating force. Finally, tip shape has an influence on the characteristics of linear motor.     

Sampled- and continuous-time passivity and stability of virtual environments

We propose a new time-domain passivity observer (PO) and passivity controller (PC) which removes the constant-velocity assumption during one sample time, which was used in our previous PO/PC approach. A new sampled-time definition of passivity is introduced, and this new definition is compared with the previous sampled-time definition of passivity. Through this comparison, we propose the more accurate PO/PC approach. The proposed new PO/PC approach is applied to the "Excalibur" haptic interface system with very high stiffness (K = 120 kN/spl middot/m) virtual environment, and stable contact is demonstrated.     

Parallel Processing of First Order Linear Recurrence on SMP Machines

In this paper, we propose a new algorithm that analyzes the data dependency pattern in the first-order linear recurrence (FOLR) and transforms it into algebraically equivalent expanded form so that it can be processed in parallel using the threads on symmetric multiprocessor (SMP) machines. The transformation aims to eliminate the data dependencies in the naive nested form of the FOLR. However, as this transformation may result in extra multiplication operations, our algorithm examines the immanent overhead of the expanded form of the FOLR and generates a new hybrid form of the FOLR. The hybrid form combines nested and appropriately expanded form in order to make it suitable for parallel processing. The parallel algorithm based on the hybrid form of the FOLR is analytically examined and tested through implementation on SMP machines. The implementation details, such as the workload balancing between processors and the optimization of cache performance, are also discussed. The experimental results show that the parallel algorithm based on the hybrid form of the FOLR considerably improves the performance on SMP machines that have three of more processors.     

Combined extended and superimposed finite element method for cracks

A combination of the extended finite element method (XFEM) and the mesh superposition method (s‐version FEM) for modelling of stationary and growing cracks is presented. The near‐tip field is modelled by superimposed quarter point elements on an overlaid mesh and the rest of the discontinuity is implicitly described by a step function on partition of unity. The two displacement fields are matched through a transition region. The method can robustly deal with stationary crack and crack growth. It simplifies the numerical integration of the weak form in the Galerkin method as compared to the s‐version FEM. Numerical experiments are provided to demonstrate the effectiveness and robustness of the proposed method. Copyright © 2004 John Wiley & Sons, Ltd.     

Boiling hysteresis at low temperature on enhanced tubes

The boiling hysteresis phenomenon is studied for a real scale enhanced evaporator tube (2 m long Turbo-B type) with R134a refrigerant used in the flooded evaporator of a centrifugal brine chiller for the ice-making facility. Unlike previous studies of the boiling heat transfer with uniform heat flux and uniform wall temperature, the wall temperature varies along the tube in the present experiment. To see if the similar hysteresis occurs as in the case of uniform wall temperature, a careful control of refrigerant temperature and heat flux is made. We have found hysteresis of the temperature overshoot (TOS) at the onset of nucleate boiling initially at the inlet section of the tube, before it gradually moved downstream section of the tube until the nucleate boiling occupied the whole section of the tube as the inlet temperature increased. The hysteresis became stronger at low refrigerant temperatures. The decreasing trend of heat flux after the contents of the whole tube boiled was different from the increasing trend. This paper provides a guideline how to design the evaporator in order to avoid the abnormal operation of the chillers.     

Thermal characterization of gallium arsenic nitride epilayer on gallium arsenide substrate using pulsed photothermal reflectance technique

Thermal conductivity of gallium arsenic nitride (GaAsN) epilayer on gallium arsenide (GaAs) substrate prepared by molecular beam epitaxy technique was measured using pulsed photothermal reflectance technique. Three-layer model incorporated thermal boundary resistance was applied to extract the thermal properties from the sample's photothermal response. Within the thickness ranging from 20 to 80 nm, no thickness dependent relationship with thermal conductivity of GaAsN epilayer was found, and the average thermal conductivity is approximately 27 W/mK at room temperature. The thermal boundary resistance at the Au/GaAsN interface is in the order of 10⁻⁸ m²K/W.