Smart TDI readout circuit for long-wavelength IR detector

A smart time delay and integration (TDI) readout circuit is suggested which performs background suppression, cell-to-cell non-uniformity compensation, and dead pixel correction. Using the smart TDI readout circuit, the integration capacitor area occupying almost the whole area of a unit-cell can be reduced to one-fifth and transimpedance gain can increase by five times. From measurement results, it is found that the skimming current error for a few hundred nA background current is < 1.25 nA corresponding to LSB/2 of ADC and the non-uniformity introduced by cell-to-cell background current variation is reduced to 1.02 nA     

Thermal buffer materials for enhancement of device performance of organic light emitting diodes fabricated by laser imaging process

Laser Induced Thermal Imaging (LITI) is a laser addressed thermal patterning technology with unique advantages such as an excellent uniformity of transfer film thickness, a capability of multilayer stack transfer and a possibility to fabricate high resolution as well as large-area display. Nevertheless, it has been an obstacle to use such a laser imaging process as a commercial technology so far because of serious deterioration of the device performances plausibly due to a re-orientation of the molecular stacking especially in the emitting layer during thermal transfer process. To improve device performances, we devised a new concept to suppress the thermal degradation during such kind of thermal imaging process by using a high molecular weight small molecular species with large steric hindrance as well as high thermostability as a thermal buffer layer to realize highly efficient LITI devices. As a result, we obtained very high relative efficiency (by EQE) up to 91.5% at 1000 cd/m² from the LITI devices when we utilize 10-(naphthalene-2-yl)-3-(phenanthren-9-yl)spiro[benzo[ij]tetraphene-7,9′-fluorene] as a thermal buffer material.     

Near-lossless/lossless compression of error-diffused images using a two-pass approach

The current international standard, the Joint Bilevel Image Experts Group (JBIG), is a representative of a bilevel image compression algorithm. It compresses bilevel images with high performance, but it shows relatively low performance in compressing error-diffused halftone images. This paper proposes a new bilevel image compression for error-diffused images, which is based on Bayes' theorem. The proposed coding procedure consists of two passes. It groups 2 /spl times/ 2 dots into a cell, where each cell is represented by the number of black dots and the locations of the black dots in the cell. The number of black dots in the cell is encoded in the first pass, and their locations are encoded in the second pass. The first pass performs a near-lossless compression, which can be refined to be lossless by the second pass. Experimental results show a high compression performance for the proposed method when it is applied to error-diffused images.     

Modeling and Simulation of New Encoding Schemes for High‐Speed UHF RFID Communication

In this paper, we present novel high‐speed transmission schemes for high‐speed ultra‐high frequency (UHF) radio‐frequency identification communication. For high‐speed communication, tags communicate with a reader using a high‐speed Miller (HS‐Miller) encoding and multiple antennas, and a reader communicates with tags using extended pulse‐interval encoding (E‐PIE). E‐PIE can provide up to a two‐fold faster data rate than conventional pulse‐interval encoding. Using HS‐Miller encoding and orthogonal multiplexing techniques, tags can achieve a two‐ to three‐fold faster data rate than Miller encoding without degrading the demodulation performance at a reader. To verify the proposed transmission scheme, the MATLAB/Simulink model for high‐speed backscatter based on an HS‐Miller modulated subcarrier has been designed and simulated. The simulation results show that the proposed transmission scheme can achieve more than a 3 dB higher BER performance in comparison to a Miller modulated subcarrier.     

A 9‐Bit 80‐MS/s CMOS Pipelined Folding A/D Converter with an Offset Canceling Technique

A 9‐bit 80‐MS/s CMOS pipelined folding analog‐to‐digital converter employing offset‐canceled preamplifiers and a subranging scheme is proposed to extend the resolution of a folding architecture. A fully differential dc‐decoupled structure achieves high linearity in circuit design. The measured differential nonlinearity and integral nonlinearity of the prototype are ×0.6 LSB and ×1.6 LSB, respectively.     

Single, Depolarized, CW Supercontinuum-Based Wavelength-Division-Multiplexed Passive Optical Network Architecture With C-Band OLT, L-Band ONU, and U-Band Monitoring

We propose and experimentally demonstrate a novel bidirectional wavelength-division-multiplexed passive optical network architecture that fully utilizes the superior optical properties of an incoherent continuous-wave (CW) supercontinuum (SC) source. The proposed architecture, which incorporates low-cost Fabry-Perot laser diodes that have been wavelength locked by spectrum-sliced beams from a depolarized 130-nm-bandwidth CW SC source, is based on a unique wavelength band allocation scheme of the C-band for an optical line terminal (OLT), the L-band for optical network units (ONUs), and the U-band for channel monitoring. A cost-effective network that features a single broadband source at the OLT, and no additional wavelength- band-selective monitoring beam reflector at each ONU can be readily achieved. The experimental demonstration presented in this paper is carried out at a data rate of 622 Mb/s over a 25-km standard single-mode fiber.     

Experimental Demonstration of 1.25-Gb/s Radio-Over-Fiber Downlink Using SBS-Based Photonic Upconversion

We experimentally demonstrate a radio-over-fiber downlink system using a stimulated Brillouin scattering (SBS)-based photonic upconversion technique. The Brillouin selective amplification characteristic of SBS is incorporated to generate the 11-GHz band radio-frequency (RF) carrier. The dual-electrode Mach-Zehnder optical modulator, which is used to carry the broadband data in the optical carrier instead of the optical sideband, is adopted along with the SBS-based carrier generation setup. To vindicate the broadband capabilities of the proposed scheme, 1.25-Gb/s pseudorandom bit sequence data is carried in the optical carrier. Error-free operation of the 1.25-Gb/s downlink is achieved without critical power penalties after the 13-km fiber transmission.     

An equalization technique for orthogonal frequency-divisionmultiplexing systems in time-variant multipath channels

A loss of subchannel orthogonality due to time-variant multipath channels in orthogonal frequency division multiplexing (OFDM) systems leads to interchannel interference (ICI) which increases the error floor in proportion to the Doppler frequency. A simple frequency-domain equalization technique which can compensate for the effect of ICI in a multipath fading channel is proposed. In this technique, the equalization of the received OFDM signal is achieved by using the assumption that the channel impulse response (CIR) varies in a linear fashion during a block period and by compensating for the ICI terms that significantly affect the bit-error rate (BER) performance     

High Efficiency Perovskite Solar Cells Exceeding 22% via a Photo-Assisted Two-Step Sequential Deposition

One of the most effective methods to achieve high-performance perovskite solar cells (PSCs) is to employ additives as crystallization agents or to passivate defects. Tri-iodide ion has been known as an efficient additive to improve the crystallinity, grain size, and morphology of perovskite films. However, the generation and control of this tri-iodide ion are challenging. Herein, an efficient method to produce tri-iodide ion in a precursor solution using a photoassisted process for application in PSCs is developed. Results suggest that the tri-iodide ion can be synthesized rapidly when formamidinium iodide (FAI) dissolved isopropyl alcohol (IPA) solution is exposed to LED light. Specifically, the photoassisted FAI–IPA solution facilitates the formation of fine perovskite films with high crystallinity, large grain size, and low trap density, thereby improving the device performance up to 22%. This study demonstrates that the photoassisted process in FAI dissolved IPA solution can be an alternative strategy to fabricate highly efficient PSCs with significantly reduced processing times.     

Side information creation for efficient Wyner–Ziv video coding: Classifying and reviewing

Video coding technologies have played a major role in the explosion of large market digital video applications and services. In this context, the very popular MPEG-x and H-26x video coding standards adopted a predictive coding paradigm, where complex encoders exploit the data redundancy and irrelevancy to ‘control’ much simpler decoders. This codec paradigm fits well applications and services such as digital television and video storage where the decoder complexity is critical, but does not match well the requirements of emerging applications such as visual sensor networks where the encoder complexity is more critical. The Slepian–Wolf and Wyner–Ziv theorems brought the possibility to develop the so-called Wyner–Ziv video codecs, following a different coding paradigm where it is the task of the decoder, and not anymore of the encoder, to (fully or partly) exploit the video redundancy. Theoretically, Wyner–Ziv video coding does not incur in any compression performance penalty regarding the more traditional predictive coding paradigm (at least for certain conditions). In the context of Wyner–Ziv video codecs, the so-called side information, which is a decoder estimate of the original frame to code, plays a critical role in the overall compression performance. For this reason, much research effort has been invested in the past decade to develop increasingly more efficient side information creation methods. This paper has the main objective to review and evaluate the available side information methods after proposing a classification taxonomy to guide this review, allowing to achieve more solid conclusions and better identify the next relevant research challenges. After classifying the side information creation methods into four classes, notably guess, try, hint and learn, the review of the most important techniques in each class and the evaluation of some of them leads to the important conclusion that the side information creation methods provide better rate-distortion (RD) performance depending on the amount of temporal correlation in each video sequence. It became also clear that the best available Wyner–Ziv video coding solutions are almost systematically based on the learn approach. The best solutions are already able to systematically outperform the H.264/AVC Intra, and also the H.264/AVC zero-motion standard solutions for specific types of content.