A new bubble-point-pressure correlation for the binary LiBr/H2O solution

In accord with the increasing concern about the global environmental issues, the absorption refrigeration heat-pump systems are currently being considered very promising and attractive. For the purpose of supporting the advanced R&D technology in this area, we have developed a novel correlation to represent the bubble-point pressures of LiBr H₂O solutions. The developed correlation covers the most extensive range of validity ever proposed: 273–483 K for temperatures, 0.05 kPa to 1.0 MPa for pressures. and 29 76 wt% LiBr for concentrations.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994. Boulder, Colorado, U.S.A.     

Significance of DNA ploidy in the treatment of T1 glottic carcinoma

OBJECTIVE: To assess the role of DNA ploidy as a predictor of radioresistance in T1 glottic carcinoma. DESIGN: Case-control study. Flow cytometric DNA ploidy measurements were performed on formalin-fixed paraffin-embedded tumor specimens from 15 patients with T1 glottic laryngeal carcinomas in whom radiotherapy had failed and from a matched group of 15 patients in whom an identical radiotherapy regimen was curative. Analysis of DNA content was performed blind to outcome of treatment. SETTING: Academic tertiary referral medical center. PARTICIPANTS: Thirty patients with clinically staged T1, N0, M0 glottic carcinoma. INTERVENTION: All patients received radiation to the larynx through opposed lateral ports at a total dose of 64 to 70 Gy. RESULTS: Ten diploid and five aneuploid histograms were found in the resistant group, and six diploid and nine aneuploid histograms were found in the radiosensitive group. This difference was not statistically significant. A trend toward a higher relapse rate after radiotherapy (62.5%) among patients with diploid tumor compared with those with aneuploid tumor (35.7%) was noted. CONCLUSIONS: DNA ploidy did not predict response to radiotherapy in patients with T1 glottic cancer, probably because of the small number of patients. A trend toward lower risk of local recurrence after radiotherapy in aneuploid tumors was noted. A larger prospective study is needed to assess the value of DNA ploidy in the treatment of early laryngeal cancer.     

DETERMINATION of the MIXING INDEX of PADDY GRAINS UNDER VIBRATING CONDITIONS

Mixing of ingredients is an important operation in processing of food for obtaining the better quality product. A laboratory set‐up capable of modulating both frequency and amplitude of vibration of the grain bed was used to determine the mixing indices of paddy grains under varied experimental conditions. the mixing indices of three different types of paddy grain for three different grain bed depths were determined. the parameters varied were the vibration amplitude, frequency and the mixing time, respectively from 2 to 10 mm, 10 to 50 Hz and 5 to 120 s. Three varieties of paddy (short bold, medium slender and long slender) were used in the experiments with different length‐breadth ratio (slenderness ratio, μ, of 5.77, 4.48 and 2.70). Response surface methodology was adopted to optimize the amplitude and frequency of vibration of the mixing device. the results revealed that, the optimum frequency and amplitude of vibration for the medium slender (μ= 4.48) variety of paddy were 20–22 Hz and 8–9 mm, respectively for all the three grain bed depths of 25, 12 and 6 mm. Irrespective of grain bed depth, all the three different types of paddy showed maximum mixing indices value after 1 min of mixing. Extending the mixing time did not have any effect on mixing indices. the effect of bed depth was found to be insignificant for short bold variety of paddy.     

Metal-containing intermacromolecular complexes: Electrochemical and viscometric studies in DMF-methanol mixture

Summary Multicomponent intermacromolecular complexes have been prepared from some typical phenolic copolymers with a non-ionic polymer (e.g. PVP), and a polyelectrolyte (e.g. PAA). Some transition metal ions (e.g. Cu(II) and Ni (II)) have been incorporated in the complex through its unreacted co-ordinating groups. The formation of these complexes has been studied by several techniques, such as viscometry, conductometry, potentiometry, IR and UV spectrophotometry. A scheme has been presented to explain the mode of interaction of the various components.     

Optical and structural properties of MOVPE grown GaxIn1−xAs/InP strained multiple quantum well atructures

This paper presents a study of the structural and optical properties of strained GaInAs/ InP multiple quantum well (MQW) structures fabricated by LP-MOVPE. The composition of the Ga _x In_1−x As films ranged fromx = 0.17 tox = 1.0 and was determined by sputtered neutral mass spectrometry (SNMS) on thick layers. The structures of the MQW samples with well widths from 1.5 to 5 nm were investigated by high resolution x-ray diffraction (HR-XRD). Simulations of the diffraction patterns showed that transition layers of approximately 2 monolayer (ML) thickness with high lattice mismatch exist at the interfaces. Photoluminescence (PL) measurements indicate well widths of a multiple of a monolayer with local variations of one monolayer. The PL peak energies vary smoothly with the Ga concentration. These results were confirmed by optical absorption measurements.     

Possibilities and extension of XRD material response analysis in failure research for the advanced evaluation of the damage level of Hertzian loaded components

Due to clearly distinguishable damage symptoms, it is differentiated between the surface and sub‐surface failure mode of rolling bearings. Material states red out by X‐ray diffraction (XRD) residual stress measurements point to a variety of loading conditions especially at raceway surfaces that are associated with several competing failure mechanisms. The corresponding lifetime reduction can range from the lower fatigue strength region to material ratcheting in extreme cases. Relevant position of the microstructural changes and nature of the failure mechanisms are characterized. The time alteration of the XRD material parameters measured at or near the surface and at the depth of the maximum equivalent stress correlates, in a different manner, with the statistical parameter of the 10 % bearing life. Both failure modes are illustrated by concrete examples. Contaminated lubricant and boundary lubrication, which represent practically important surface‐induced failures, are discussed in more detail. Gray staining, i.e. shallow pitting, often occurs without distinct indication of global material aging by means of XRD characteristics. Here, scanning electron microscopy observations and electron microprobe analyses point to corrosion fatigue as acting surface failure mechanism. The interaction between material and lubricant under complex loading regimes particularly of mixed friction and corrosion opens further failure research areas in the field of tribology.