Post‐protection effect of heat‐resistant insulations on timber‐frame members exposed to fire

In lightweight walls and floors, the load‐bearing timber members are protected by cladding on the sides to form a divider between two fire compartments or to provide appropriate fire protection to the load‐bearing members. The spaces between the timber members can be void or filled with insulation materials. Although a huge number of different insulation materials exist, the most commonly used material is mineral wool insulation. The existing design model for glass wool‐insulated timber‐frame constructions, given in European standard 1995‐1‐2, assumes collapse of the glass wool after failure of the cladding. However, a new form of glass wool insulation, suitable for use at high maximum service temperatures, is now available in the market. The charring phase after the cladding's failure is known as the post‐protection phase. The behaviour of the new heat‐resistant glass wool in the post‐protection phase is similar to that of stone wool and considerably better than that of traditional glass wool. The protective properties of stone wool have changed over the last decades. Charring is one of the main parameters needed to calculate the resistance of a structure to fire. Based on experimental investigations, this paper describes the analysis of the effect of the insulation with regard to its ability to protect timber members against charring during the post‐protection phase. Copyright © 2011 John Wiley & Sons, Ltd.     

Epitaxial crystallization of olefin block copolymers (OBCs) on uniaxially oriented isotactic polypropylene and high-density polyethylene films

The epitaxial crystallization behavior of olefin block copolymers (OBCs) on uniaxially oriented isotactic polypropylene (iPP) and high-density polyethylene (HDPE) films has been investigated by transmission electron microscopy (TEM). The crystallizable blocks of the OBCs under investigation were epitaxially nucleated by both iPP and HDPE substrates and epitaxial growth of OBC lamellae was observed. Epitaxial crystallization of the OBCs has been found for slow and fast cooling conditions from the melt which pointed to the strong interaction between the polyolefin substrates and the OBCs. However, the epitaxial morphology of the OBCs strongly depends on their octene concentration difference (Δ_C8) between crystallizable and non-crystallizable blocks, which probably is related to the OBC segregation strength in the melt. With high Δ_C8 the development of epitaxial crystallization of the OBC was restricted within isolated crystalline domains surrounded by the amorphous phase. In contrast, with low Δ_C8 the oriented lamellae of the OBC were distributed homogeneously on iPP but formed separated crystalline domains on HDPE, which has a stronger nucleation capability than iPP on the crystalline OBC blocks because of its similar molecular architecture. Our study points to epitaxy as another reason for the strong interaction between OBC and polyolefins which causes the advanced compatibilization behavior of OBCs when compared with conventional random copolymers.     

Aging effect of atmospheric pressure plasma jet treated polycaprolactone polymer solutions on electrospinning properties

In previous work, an atmospheric pressure plasma jet was applied to successfully improve the electrospinnability of poly-ε-caprolactone (PCL) which enabled the fabrication of beadless nanofibers. In this paper, we report the aging effect of the plasma treatment to evaluate the robustness of the developed process. For this purpose, plasma-treated PCL polymer solutions with different exposure time were stored for 1 and 8 days and the aged solutions were analyzed in terms of conductivity, viscosity, surface tension, pH, and polymer molecular weight. During storage, the surface tension and acidity of the plasma-treated solutions were maintained constant. However, the viscosity was found to be significantly lower after 8 days which was attributed to PCL degradation. Electrospinning of all stored PCL solutions resulted in the generation of beadless PCL nanofibers. The plasma treatment effects were thus found to be highly stable over time and capable of producing high-quality PCL nanofibers up to 8 days. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48914.     

Synthesis and SAR of Tetracyclic Inhibitors of Protein Kinase CK2 Derived from Furocarbazole W16

The serine/threonine kinase CK2 modulates the activity of more than 300 proteins and thus plays a crucial role in various physiological and pathophysiological processes including neurodegenerative disorders of the central nervous system and cancer. The enzymatic activity of CK2 is controlled by the equilibrium between the heterotetrameric holoenzyme CK2α₂β₂ and its monomeric subunits CK2α and CK2β. A series of analogues of W16 ((3aR,4S,10S,10aS)-4-{[(S)-4-benzyl-2-oxo-1,3-oxazolidin-3-yl]carbonyl}-10-(3,4,5-trimethoxyphenyl)-4,5,10,10a-tetrahydrofuro[3,4-b]carbazole-1,3(3aH)-dione ((+)- 3 a )) was prepared in an one-pot, three-component Levy reaction. The stereochemistry of the tetracyclic compounds was analyzed. Additionally, the chemically labile anhydride structure of the furocarbazoles 3 was replaced by a more stable imide ( 9 ) and N-methylimide ( 10 ) substructure. The enantiomer (−)- 3 a (K_i=4.9 μM) of the lead compound (+)- 3 a (K_i=31 μM) showed a more than sixfold increased inhibition of the CK2α/CK2β interaction (protein-protein interaction inhibition, PPII) in a microscale thermophoresis (MST) assay. However, (−)- 3 a did not show an increased enzyme inhibition of the CK2α₂β₂ holoenzyme, the CK2α subunit or the mutated CK2α′ ^C336S subunit in the capillary electrophoresis assay. In the pyrrolocarbazole series, the imide (−)- 9 a (K_i=3.6 μM) and the N-methylimide (+)- 10 a (K_i=2.8 μM) represent the most promising inhibitors of the CK2α/CK2β interaction. However, neither compound could inhibit enzymatic activity. Unexpectedly, the racemic tetracyclic pyrrolocarbazole (±)- 12 , with a carboxy moiety in the 4-position, displays the highest CK2α/CK2β interaction inhibition (K_i=1.8 μM) of this series of compounds.     

Thermal Stability, Phase Evolution, and Crystallization in Si-B-C-N Ceramics Derived from a Polyborosilazane Precursor

Amorphous Si-B-C-N ceramic powder samples obtained by thermolysis of boron-modified polysilazane, {B[C₂H₄Si(H)NH]₃} _n , were isothermally annealed at different temperatures (1400–1800°C) and hold times (3, 10, 30, and 100 h). A qualitative and semiquantitative analysis of the crystallization behavior of the materials was performed using X-ray diffraction (XRD). The phase evolution was additionally followed by ¹¹B and ²⁹Si MAS NMR as well as by FT-IR spectroscopy in transmission and diffuse reflection (DRIFTS) modes. Bulk chemical analyses of selected samples were performed to determine changes in the chemistry/phase composition of the materials. It was observed that silicon carbide is the first phase to nucleate around 1400–1500°C, whereas silicon nitride nucleates at and above 1700°C. Crystallization accelerates with increasing annealing temperature and proceeds with increasing annealing time. Furthermore, the surface area of the powders strongly influences the thermal stability of silicon nitride and thus controls overall chemical and phase composition of the materials on thermal treatment.     

Crystallization of Polymer-Derived Silicon Carbonitride at 1873 K under Nitrogen Overpressure

The chemical stability of an amorphous silicon carbonitride ceramic, having the composition 0.57SiC·0.43Si₃N₄·0.49C is studied as a function of nitrogen overpressure at 1873 K. The ceramic suffers a weight loss at p _N2 < 3.5 bar (1 bar = 100 kPa), does not show a weight change from 3.5 to 11 bar, and gains weight above 11 bar. The structure of the ceramic changes with pressure: it is crystalline from 1 to 6 bar, amorphous at ∼10 bar, and is crystalline above ∼10 bar. The weight-loss transition, at 3.5 bar, is in excellent agreement with the prediction from thermodynamic analysis when the activities of carbon, SiC, and Si₃N₄ are set equal to those of the crystalline forms; this implies that the material crystallizes before decomposition. The amorphous to crystalline transition that occurs at ∼10 bar, and which is accompanied by weight gain, is likely to have taken place by a different mechanism. A nucleation and growth reaction with the atmospheric nitrogen is proposed as the likely mechanism. The supersaturation required to nucleate α-Si₃N₄ crystals is calculated to be 30 kJ/mol.     

(R)-acetoin-female sex pheromone of the summer chafer Amphimallon solstitiale (L.)

Extracts of Amphimallon solstitiale (L.), a well known, widely distributed and rather common European scarab beetle, were analyzed by GC-MS and GC-EAD. Acetoin -(R):(S) < 9:1 - as well as 2,3-butanediol -(2R,3R):(2S,3S) :meso = 1:1:9 - were present in extracts of both males and females. Although (2S,3S)-butanediol did not show any EAD activity, the other compounds elicited strong responses exclusively with male antennae. In contrast, several EAD active green leaf volatiles were detected equally well by male and female antennae. During preliminary field bioassays, (R)-acetoin was highly attractive to swarming males, whereas neither rac-acetoin nor the 2,3-butanediols showed activity. Therefore, (R)-acetoin is the female sex pheromone of A. solstitiale.     

High-pressure fluidized bed coating utilizing supercritical carbon dioxide

Various particles with sizes between 100 and 200 μm were encapsulated with waxes commonly used in technical coating applications. For this, a homogeneous mixture of molten paraffin and supercritical carbon dioxide was prepared in an autoclave and injected into the high-pressure fluidized bed through a nozzle from the bottom. Due to the different conditions in the mixing autoclave and the fluidized bed, the paraffin precipitated in the vicinity of the nozzle and adhered to the solid particles. A complete, thin, uniform, and solvent-free coating was produced. The use of two paraffins with different alkane compositions resulted in dissimilar spreads on glass beads due to their different glass transition temperatures. A smaller pressure drop across the nozzle led to more uniform and even coatings. Glass beads, ceramic spheres, potassium chloride, and lactose showed similar coating results, whereas different morphologies were observed with a plastic material, characterized by a rougher surface and a lower surface energy. The high quality of the coating was confirmed by standard dissolution tests with coated potassium chloride crystals and lactose agglomerates.