The power of inequality semijoins

Semijoin is a relational operator used in many relational query processing algorithms. Semijoins can be used to “reduce” the database by delimitting portions of the database that contain data relevant to a given query. For some queries, there exist sequences of semijoins that delimit the exact portions of the database needed to answer the query. Such sequences are called full reducers.

This paper considers a class of queries called natural inequality queries (NI queries), and characterizes a subclass for which full reducers exist. We also present an efficient algorithm that decides whether an NI query lies within this subclass, and constructs a full reducer for the query. The NI queries are a subset of the aggregate-free, conjunctive queries of QUEL, and permit join clauses to include <, , =, , >.     

Computers and the 16th-century Chanson a pilot project at the University of Chicago

Conclusions One cardinal principle guided our evaluation of the data provided for us by the computer: never to be deluded into believing that the computer was in any way capable of analyzing a piece of music. Rather, we used the information made available by the computer as a means of substantiating or explaining the insights into a given composition that we gained by means of a direct confrontation with the music. In this way, the data supplied by the computer proved to be very useful in explaining why a particular portion of a chanson generates a sense of tension, while another section of the same piece creates a feeling of rest. Similarly, the electronically derived information was particularly helpful in setting up stylistic profiles of the various composers whose chansons were included in our sampling. In fact, the computer output was instrumental in helping to settle more than one problem of conflicting attributions, largely on the basis of these stylistic profiles. Like any other computerized process, our program elicited from the computer no analytical operation that could not have been done without the assistance of the computer. Very little precise measurement has been done in the analysis of the music of the Renaissance, however, and for good reason: the compilation of statistical data of the type we have described takes so much time that it can be considered feasible only with mechanical assistance. The ability we gained to apply to the chanson repertory a somewhat more precise system of analytical measurement was the most encouraging aspect of the pilot project. candidate for the Ph.D. in Physics     

The process of crack initiation and effective grain size for cleavage fracture in pearlitic eutectoid steel

The process of cleavage crack initiation and the character of the effective grain size which controls the fracture toughness of pearlitic eutectoid steel has been investigated using smooth tensile and precracked Charpy impact specimens. The results demonstrated that initial cracking in both specimens was largely the result of shear cracking of pearlite;i.e., localized slip bands in ferrite promoted cracking of the cementite plates, which was then followed by tearing of the adjacent ferrite laths. Such behavior initially results in a fibrous crack. In the tensile specimen, the initiation site was identified as a fibrous region which grew under the applied stress, eventually initiating an unstable cleavage crack. In precracked impact specimens, this critical crack size was much smaller due to the high state of stress near the precrack tip. Fracture mechanics analysis showed that the first one or two dimples formed by the shear cracking process can initiate a cleavage crack. Using thin foil transmission electron microscopy, a cleavage facet was found to be an orientation unit where the ferrites (and the cementites) of contiguous colonies share a common orientation. The size of this orientation unit, which is equal to the cleavage facet size, is controlled by the prior austenite grain size. The influence of austenite grain size on toughness is thus explained by the fact that the austenite grain structure can control the resultant orientation of ferrite and cementite in pearlitic structures. Y.J. PARK, formerly with Carnegie-Mellon University, Pittsburgh, PA.     

Behavior-change trials to assess the feasibility of improving complementary feeding practices and micronutrient intake of infants in rural Bangladesh

This study used simple rapid-assessment techniques to test the feasibility of increasing the consumption of complementary foods by infants by asking mothers to increase meal quantity or frequency or by altering the viscosity/energy density of the food. The feasibility of using micronutrient supplements either added directly to food or administered as liquid drops was also examined. The study was conducted in rural Bangladesh and involved four separate short-term behavioral change trials. Depending on the trial, fieldworkers recruited 30 to 45 infants 6 to 12 months of age. Following recommendations to increase the amount of food provided to infants, the mean intakes from single meals increased from 40 +/- 23 g on day 1 to 64 +/- 30 g on day 7 (p < 0.05). In a second trial, the mean meal frequency increased from 2.2 +/- 1.3 on day 1 to 4.1 +/- 1.3 on day 7 (p < 0.05). Provision of high-energy-density diets, prepared by decreasing viscosity with alpha-amylase or by hand-mashing rice and dhal into a paste before feeding, increased single-meal energy consumption from 54 +/- 35 kcal to 79 +/- 52 kcal or 75 +/- 37 kcal (p < 0.05), respectively. Both types of micronutrient supplements were well accepted and used according to recommendations. In conclusion, it was possible to change short-term child-feeding behaviors to promote increased food intake, mealfrequency, energy density, and micronutrient consumption. Because each of these interventions lasted for only about 1 week, however, the long-term sustainability of these changes is not known. Moreover, the effect of increased feeding of complementary foods on intakes of breastmilk and total daily consumption of energy and nutrients requires further study.     

Poly(amidoamine) dendrimers as nanoscale diffusion probes in sol-gel films investigated by total internal reflection fluorescence spectroscopy

Three generations of poly(amidoamine) dendrimers were dye-labeled and chemically modified to have terminal carboxyl groups and used as variably sized probes to study diffusion in thin sol-gel films. Total internal reflection fluorescence spectroscopy experiments, both correlation and concentration-jump measurements, were employed to measure the relative populations and effective diffusion coefficients of dendrimers in the films. For films prepared from small (27-nm) silica particles, larger dendrimers could be completely excluded from penetrating the sol-gel structure. In films made of larger (150-nm) particles with correspondingly larger pores, concentration-jump experiments showed that larger dendrimers are excluded from more of the intraparticle pore space than small dendrimers. Similarly, fluorescence-correlation measurements showed that the diffusion of smaller dendrimers exhibited greater tortuosity than larger dendrimers in the interparticle pores of the film. The smaller dendrimers explore a greater volume of smaller, more convoluted pores, whereas larger dendrimers penetrate a smaller volume of larger, more open pores.     

In-line optical fiber sensors based on cladded multimode tapered fibers

The use of uniform-waist cladded multimode tapered optical fibers is demonstrated for evanescent wave spectroscopy and sensors. The tapering is a simple, low-loss process and consists of stretching the fiber while it is being heated with an oscillating flame torch. As examples, a refractive-index sensor and a hydrogen sensor are demonstrated by use of a conventional graded-index multimode optical fiber. Also, absorbance spectra are measured while the tapers are immersed in an absorbing liquid. It is found experimentally that the uniform waist is the part of the taper that contributes most to the sensor sensitivity. The taper waist diameter may also be used to adjust the sensor dynamic range.     

Assessing changes in the meaning of children's behavior: Factorial invariance of teachers' temperament ratings.

Tested the assumption that the same behavioral rating scale may be used over a wide age range, using temperament ratings provided by 24 teachers of 564 kindergarten through 4th-grade children. A LISREL analysis supported the hypothesized 3-factor model and established factorial invariance. The consistency of the factor structure over grade and the similarity of this structure to the findings from other factor analytic studies suggest that teachers may organize information about student behavior along the same dimensions regardless of the grade they teach. Such invariance may result from the demands of the teaching task rather than actual covariation among student behaviors. (40 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Influence of aeration on hydrophobic organic contaminant distribution and diffusive flux in estuarine sediments

Dredging operations, resuspension events during storms, and bioturbation alter the oxic state of estuarine sediments and induce changes in the composition of dissolved and particle-associated natural organic matter. These changes may alter the distribution of hydrophobic organic chemicals (HOCs) in sediments and their diffusive flux across the sediment-water interface. In this study, the impact of aerating anoxic sediments on the distribution and diffusive flux of a model HOC, 2,2',4,4'-tetrachlorobiphenyl (TeCB), was investigated. Anoxic estuarine sediments collected from three sites along a salinity gradient were used to determine site-specific apparent sorption coefficients for porewater dissolved organic carbon (Kpwdoc) and sediment organic carbon (Koc) under anoxic and oxic conditions. A two-compartment sediment flux model was employed to examine the diffusive flux of TeCB under both oxic states. Aeration of anoxic porewaters resulted in significant decreases in porewater dissolved organic matter (DOMpw) aromaticity as indicated by declines in molar absorptivity at 254 nm (p < 0.005). Aeration also resulted in a 9-13% decrease in DOMpw concentration (p < 0.005) at the two sites exhibiting lower ionic strengths; the high ionic strength site did not exhibit a significant change in DOMpw concentration (p > 0.10). The impact of aeration on TeCB distribution and diffusive flux appeared to be site-specific. Aeration of anoxic sediments induced a significant 1.4 log unit reduction in Kpwdoc at the lowest ionic strength site (p < 0.0005), while sediments from the intermediate ionic strength site exhibited a significant 0.6 log unit increase (p < 0.005). No significant change in sorption to DOMpw was observed for the high ionic strength site (p > 0.10). The sediment displaying the drop in Kpwdoc also exhibited a significant 0.4 log unit drop in Koc (p < 0.01), while the other two sites did not exhibit significant aeration-induced changes in sorption to particle-associated organic matter (p > 0.10). No significant change in diffusive flux was observed for two sites (p > 0.10), while a significant 89-110 mg m(-2) yr(-1) increase in diffusive flux was observed at the low ionic strength site (p < 0.10). This latter result represented approximately a doubling in diffusive flux. In the systems studied, facilitation of TeCB transport across the sediment-water interface by organic colloids did not appear important.     

Monitoring the formation and decay of transient photosensitized intermediates using pump-probe UV resonance Raman spectroscopy. I: Self-modeling curve resolution

Resolution of transient excited-state Raman scattering from ground-state and solvent bands is a challenging spectroscopic measurement since excited-state spectral features are often of low intensity, overlapping the dominant ground-state and solvent bands. The Raman spectra of these intermediates can be resolved, however, by acquiring time-resolved data and using multidimensional data analysis methods. In the absence of a physical model describing the kinetic behavior of a reaction, resolution of the pure-component spectra from these data can be accomplished using self-modeling curve resolution, a factor analysis technique that relies on the correlation in the data along a changing composition dimension to resolve the component spectra. A two-laser UV pump-probe resonance-enhanced Raman instrument was utilized to monitor the kinetics of amine quenching of excited-triplet states of benzophenone. The formation and decay of transient intermediates were monitored over time, from 15 ns to 100 micros. Factor analysis of the time-resolved spectral data identified three significant components in the data. The time-resolved intensities at each Raman wavenumber shift were projected onto the three significant eigenvectors, and least-squares criteria were developed to find the common plane in the space of the eigenvectors that includes the observed data. Within that plane, the three pure-component spectra were resolved using geometric criteria of convex hull analysis. The resolved spectra were found to arise from benzophenone excited-triplet states, diphenylketyl radicals, and the solvent and ground-state benzophenone.     

Influence of the storage orientation on the aerodynamic particle size of a suspension metered dose inhaler containing propellant HFA-227

Presented in this work are the results of a study designed to investigate the impact of the storage position on the particle size distribution (PSD) of a steroid suspension metered dose inhaler (MDI) containing propellant HFA-227. It was hypothesized that the orientation of MDI samples upon storage could influence the PSD of the emitted dose, since it determines the amount of contact the liquid formulation has with the valve and therefore the quantity of nonvolatile leachable materials from the valve components that may enter the product and potentially impact the aerosol spray dynamics. Samples stored in the valve down orientation (i.e., complete contact of the liquid formulation with the valve) showed a higher level of leachables compared to those samples stored valve up (i.e., minimal contact of the formulation with the valve). The valve down samples were found to produce larger particles in the emitted aerosol spray using both cascade impaction, the preferred method of regulatory submission, as well as laser diffraction. It was postulated that the larger particle size of the inverted samples was attributed to its higher levels of leachables. Based on our findings, it is recommended that in order to set appropriate controls on the product PSD, the storage orientation of the product will need to be considered.