Primary processes of the thermal degradation of HET acid containing unsaturated polyester cured with styrene

The primary processes of thermal degradation of 1,4,5,6,7,7-hexachloro-5-norbornene-2,3-dicarboxylic (HET) group containing unsturated polyesters cured with styrene were investigated. DTA traces in nitrogen atmosphere showed a much more pronounced endothermic reaction as the chlorine content in the unsaturated polyester resin decreased. This could be associated to the unzipping of the polystyrene units which is interfered by hexachlorocyclopentadiene ejected during degradation. Actually the styrene formation is prevented in a certain range of temperature due to the interaction with hexachlorocyclopentadiene. This was proved by on-line mass spectroscopic analysis of the degrading polymer.     

Rapid species identification in meat by using satellite DNA probes

A fast procedure for species identification in heated meat is described. Deoxyribonucleic acid (DNA) was isolated from meat samples by an alkaline extraction method and hybridized to a conjugate of a specific oligonucleotide and alkaline phosphatase. The oligonucleotide probes are based on satellite DNA, tandem-repeated sequences, which are highly specific for species. Probes are developed for the identification of meat from cattle, sheep/goat, horse, deer, pig, chicken and turkey. Differentiation between closely related species like chicken and turkey is possible. Admixtures of 1–5% of meat of one species in another could be detected. The complete assay of up to 50 samples takes 4 h. Heated meat samples could be analysed.     

Zur Prüfung der Witterungsbeständigkeit zementgebundener Holzspanplatten

The duration against weathering is of special importance when using cement bonded particleboards for structural purposes. To determine those properties cement bonded particleboards of various types, uncoated as well as coated, were tested under open air weathering conditions and with the Xenotest-weathering-apparatus. Possible qualitative changes were observed by determining bending strength and crushing strength. It could be noted, that the use of additives reduced the duration against weathering. It resulted as well, that insufficient coatings (i.e. dispersion based resins) remarkably reduce the duration as compared to more suitable coating systems.     

Comparison of plastic films with different optical properties for soil covering in horticulture: test under simulated environmental conditions

Covering the soil with plastic film is an important method to modify soil temperature and improve the conditions for plant growth. For the optimal use of films in horticulture, it is necessary to quantify this effect, which depends particularly on the optical properties of the film. Five films, used mainly for soil covering in asparagus cultivation, were tested by measuring the soil temperature as well as the transmittance and reflectance in the short‐ and long‐wavelength bands: ‘Taschenfolie schwarz/weiß’, a film with black and white surfaces and pockets for fastening; ‘Antitaufolie’, a film with anti‐condensation coating, ‘Solartherm plus Folie’, a film with black top and transparent sides; ‘MaterBi Folie’, a biodegradable film; and ‘Thermoplus Folie’, a black polyethylene with transparent sides. All films were produced in Germany. The temperature measurements were carried out under controlled irradiation (short‐wavelength band) and ambient temperature conditions in the laboratory: first, 182 W m^?2 and 11 °C at a depth of 0.4 m, and second, 340 W m^?2 at 20 °C. A significant relationship between the temperature increase or decrease by covering the soil with the film and the calculated apparent quantities of the reflectance in the short and long‐wavelength band was derived (r² = 0.85, n = 12). Furthermore, first tests with a physical model were carried out to obtain basic information, which should be used in the development of strategies for film management in the field. Copyright © 2004 Society of Chemical Industry     

Diagenetic transformation of dissolved organic nitrogen compounds under contrasting sedimentary redox conditions in the Black Sea

Remineralization of organic matter in reactive marine sediments releases nutrients and dissolved organic matter (DOM) into the ocean. Here we focused on the molecular-level characterization of DOM by high-resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) in sediment pore waters and bottom waters from contrasting redox regimes in the northern Black Sea with particular emphasis on nitrogen-bearing compounds to derive an improved understanding of the molecular transformations involved in nitrogen release. The number of nitrogen-bearing molecules is generally higher in pore waters than in bottom waters. This suggests intensified degradation of nitrogen-bearing precursor molecules such as proteins in anoxic sediments: No significant difference was observed between sediments deposited under oxic vs anoxic conditions (average O/C ratios of 0.55) suggesting that the different organic matter quality induced by contrasting redox conditions does not impact protein diagenesis in the subseafloor. Compounds in the pore waters were on average larger, less oxygenated, and had a higher number of unsaturations. Applying a mathematical model, we could show that the assemblages of nitrogen-bearing molecular formulas are potential products of proteinaceous material that was transformed by the following reactions: (a) hydrolysis and deamination, both reducing the molecular size and nitrogen content of the products and intermediates; (b) oxidation and hydration of the intermediates; and (c) methylation and dehydration.     

Rheological properties of ice cream mixes and frozen ice creams containing fat and fat replacers

Ice cream mixes and frozen ice creams at milk fat levels of 12%, 8%, 6%, 6% plus a protein-based fat replacer, and 6% plus a carbohydrate-based fat replacer were evaluated for viscoelastic properties by dynamic testing with sinusoidal oscillatory tests at various frequencies. The storage modulus (G'), loss modulus (G"), and tan delta (G"/G') were calculated for all the treatments to determine changes in the viscous and elastic properties of the mixes and frozen ice creams due to fat content. In ice cream mixes, G' and G" exhibited a strong frequency dependence. The G" was higher than G' throughout the frequency range (1 to 8 Hz) examined, without any crossover, except for the 12% mix. Elastic properties of the ice cream mixes decreased as fat content decreased. Tan delta values indicated that fat replacers did not enhance the elastic properties of the ice cream mixes. In all frozen ice creams, G' and G" again showed a frequency dependence throughout the range tested (0.5 to 10 Hz). The amount of fat in ice creams and the degree of fat destabilization affected the elasticity in the frozen product. Even though the ice creams did not have significant elastic properties, when compared as a group the samples with higher fat content had higher elastic properties. The addition of protein-based and carbohydrate-based fat replacers did not enhance the elastic properties of the ice creams but did increase the viscous properties.     

Occurrence of a nitro metabolite of a defined nonylphenol isomer in soil/sewage sludge mixtures

Uniformly [14C]-ring-labeled 4-(3,5-dimethyl-3-heptyl)phenol (353-nonylphenol) is a highly relevant isomer of the technical nonylphenol mixture. We studied the sorption, desorption, and degradation of the synthesized isomer in an agricultural sandy loam at various soil/sewage sludge ratios. Sorption of 353-nonylphenol was high and differed with the amount of suspended soil in water. log Koc values, which are used to assess the risk of nonylphenol, ranged from 3.80 to 5.75. Desorption was slow and low and resulted in constant concentrations of about 15 ng/L353-nonylphenol in water after several desorption steps. In degradation studies up to 6% of the applied 353-nonylphenol in soil was volatilized; we consider this an important source of nonylphenol in the environment. With increasing amounts of sewage sludge in the soil/sewage sludge mixtures, 353-nonylphenol was stabilized, probably because of the lack of oxygen in sludge aggregates even under oxic conditions in flow-through systems. Unexpectedly, a less-polar metabolite was detected in amounts up to 40% of the applied nonylphenol after 135 days of incubation. This novel metabolite was identified as 4-(3,5-dimethyl-3-heptyl)-2-nitrophenol. This product formation might indicate the existence of novel metabolic pathways of nonylphenol in the environment.     

Linking denitrification and infiltration rates during managed groundwater recharge

We quantify relations between rates of in situ denitrification and saturated infiltration through shallow, sandy soils during managed groundwater recharge. We used thermal methods to determine time series of point-specific flow rates, and chemical and isotopic methods to assess denitrification progress. Zero order denitrification rates between 3 and 300 μmol L(-1) d(-1) were measured during infiltration. Denitrification was not detected at times and locations where the infiltration rate exceeded a threshold of 0.7 ± 0.2 m d(-1). Pore water profiles of oxygen and nitrate concentration indicated a deepening of the redoxocline at high flow rates, which reduced the thickness of the zone favorable for denitrification. Denitrification rates were positively correlated with infiltration rates below the infiltration threshold, suggesting that for a given set of sediment characteristics, there is an optimal infiltration rate for achieving maximum nitrate load reduction and improvements to water supply during managed groundwater recharge. The extent to which results from this study may be extended to other managed and natural hydrologic settings remains to be determined, but the approach taken in this study should be broadly applicable, and provides a quantitative link between shallow hydrologic and biogeochemical processes.     

Investigation on bonding quality of beech wood (Fagus orientalis L.) veneer during high temperature drying and aging

In the present study, the effects of high drying temperature and UV light induced aging on bonding quality of plywood manufactured from untreated and treated veneer layers were investigated. Rotary cut veneers with dimensions of 500 mm×500 mm×2 mm produced from beech (Fagus orientalis Lipsky) log were selected for topochemical, chemical and mechanical analyses. The veneer sheets were oven-dried at 100°C and 180°C after the peeling process. Afterwards, the surfaces were exposed to artificial UV irradiation in an UV chamber for 24 h, 48 h and 72 h representing natural sun irradiation of 2, 4 and 6 months, respectively. Topochemical distribution of lignin and phenolic extractives of the treated and untreated veneers was investigated on a cellular level using UV microspectrophotometry (UMSP). For the chemical characterization of accessory compounds high performance liquid chromatography (HPLC) was used. Furthermore, the shear and bending strengths of plywood manufactured from the treated samples are determined in order to study the bonding quality. The UV microscopic detection shows that after high drying temperature and aging treatment, lignin condensation occurs. With increasing drying temperature and aging duration, more phenolic extractives are situated in parenchyma cells and vessel lumens which can be proved by increased absorbance at 278 nm. The HPLC analysis of the treated tissue showed distinct signals of polymerized compounds such as catechin and 2,6-dimethoxybenzoquinone which are chromophoric compounds in discolored beech wood. The mechanical properties of plywood showed that with increasing drying temperature up to 180°C does not negatively affect shear and bending strengths of samples. After exposure of the veneers to UV irradiation (especially 6 months), decreasing shear and bending strengths of plywood samples can be observed.