An Active Feedback System for Stabilizing Visual Images

In normal vision, eye movements cause the image to move on the retina. Special apparatus can stabilize the image on the retina so it cannot move, and vision fades away. Previous methods for stabilizing the image were either optical systems or complex computer-controlled feedback systems. A simpler feedback system is presented which detects eye motion and rotates a mirror through which the target is viewed, to exactly compensate for eye motion. Unlike previous optical systems, this new system has no lenses in either the viewing or the image-forming path to limit the spatial resolution.     

The Future of High Energy Accelerators

This paper begins with a review of those high energy accelerators which are now in operation. Accelerators under construction are discussed and very high energy machines, still far in the future, are listed and described. Possible uses of cryogenic and superconducting magnets are mentioned. Colliding beam projects in operation and planned are presented. High energy physics has become very expensive. The total investment in Brookhaven's 33-GeV accelerator complex is now over $60 million and is still rising. Merely to operate the accelerator and its experimental areas requires the services of over 400 people. Our power bill is about $1 million per year. All of this is to produce new knowledge, very fundamental in nature but without evident immediate application. With the budget of the United States in a state of unbalance and with growing sentiment that money spent should show immediate results, is it wise or even sensible to think of new and more expensive steps along the route to the solution of the many mysteries of the nucleus and its components? I think that it is wise and that frontier fields like that of high energy physics must be pursued vigorously if we are to maintain our intellectual and technical position in the world. Sooner or later our experimental results will have important impacts on our life, probably in quite unforeseeable fashions. Nuclear physics began its history before the turn of the century; only in the last two decades has it resulted in a new power industry.     

Toughening by Metallic Lamina in Nickel/Alumina Composites

Tape casting and hot-pressing were used to produce metal/ alumina laminate composites. The mechanical behavior of these laminates was characterized. The strength and toughness of the laminates were greatly improved in comparison to that of monolithic alumina. Indentation strength values of the laminates remained approximately constant for indent loads between 10 and 100 N. Thus, this type of laminate appears to be a good candidate for damage-tolerant composite material design.     

Direct Observation of Triplet Reactions of Anthraquinone Vat Dyes Using Nanosecond Laser Photolysis

The triplet-triplet spectra of three commercial anthraquinone vat dyes (C.I. 67300, C.I. 59100 and C.I. 60515) were studied in solution at room temperature using laser photolysis. The triplet states of these dyes react with oxygen, and the rate constants for the quenching process were measured, together with the rates of energy transfer from the triplet state to anthracene. These observations are considered in relation to the photoreactivity of these dyes.     

Flow of fluidized solids and bubbles in standpipes and risers

Equations are presented for the densities of fluidized solid-bubble mixtures in downward and upward vertical flow. Data from a large commercial standpipe are in close agreement with calculations. Flow instability is predicted when downward solid flow is sufficient to hold a gas bubble stationary in a standpipe. Commercial experience of such instability is presented indicating the existence of slugs in a 45-in.-diam. standpipe.     

Preparation of lot samples of nut meats for mycotoxin assay

A procedure has been devised for preparing lot samples of mycotoxin-contaminated nut meats so that a representative analytical sample may be removed. The sample is rapidly reduced to coarse size. A relatively large portion (about 1/10 of total sample) of subsample is then split out and further comminuted to a fine particle size with the aid of a fat solvent (meat-solvent, w/v, 3:2). The analytical sample is removed from this mixture. The procedure was tested with shelled almonds and shelled walnuts using radioactive nuts to simulate the mycotoxin contamination and provide a simple, precise measure of the contaminated nut meat distribution. The pooled coefficient of variation was 18% for the subsamples and 4.4% for the analytical samples. Considering the dilution factors used (1.50 and 2.14 contaminated nuts/10⁴ nuts) and the low degree of reliability of the lot sample, the sample preparation methods tested appear to be practical and reliable.     

NMR chemical shift reagents in structural determination of lipid derivatives: IV. Methylcis- andtrans-9,10-epoxystearate and methylerythro- andthreo-9,10-dihydroxystearate

Chemical shift reagents were used to expand the amount of structural information obtainable from NMR studies of derivatives of methyl oleate and elaidate:methylcis-9,10-epoxystearate, methyltrans-9,10-epoxystearate, methyl erythro-9,10-dihydroxystearate, and methyl threo-9,10-dihydroxystearate. Chemical shift reagent studies of methyltrans-9,10-epoxystearate and methyl threo-9,10-dihydroxystearate afforded the most information. Chemical shift reagent studies of methylcis-9,10-epoxystearate and methyl erythro-9,10-dihydroxystearate were decidedly inferior. The series of complementary interpretive techniques previously developed during chemical shift reagent studies of monofunctional fatty esters and model polyfunctional fatty esters were found to be applicable in the current study. However, to avoid ambiguity in several proton assignments, supplementary spin decoupling experiments were necessary.     

Velocity and temperature profiles in compressible turbulent wall jets

The results of an experimental study on compressible turbulent wall jets resulting from a normally impinging round jet are presented. A finite difference technique was used for the calculation of velocity and temperature profiles. The eddy transfer coefficients used were functions of the distance from the plate throughout the flow field of the wall jet. The nozzle exit Mach number ranged up to 0.85. The nozzle exit temperature to the ambient temperature ratio ranged up to 2.92. The applicability of the calculational method has been thoroughly checked for a region of flow extending up to 12 nozzle diameters from the axis of symmetry. Using the empirical eddy transfer coefficients presented in this paper only starting profiles are needed to generate the solution for any point in the wall jet flow field which is described by a system of parabolic (boundary layer) equations.     

Superposition of the notched strength of composite laminates

An improved macroscopic model for predicting the strength of a composite laminate containing a circular notch is developed. Two constants are introduced which uniquely determine the notch sensitivity of a given material. A superposition method for the notched strength of composite laminates is developed which allows data for arbitrary materials and laminate configurations to be superimposed upon a single master curve. The influence of material orthotropy upon notched strength is discussed. A relative notch sensitivity parameter is introduced which allows quantification of the notch sensitivity of a given composite material system, stacking sequence, or laminate configuration.