Hypervelocity impact computations with finite elements and meshfree particles

The ability of computations to model characteristics of hypervelocity impact is demonstrated using an algorithm for the automatic conversion of distorted finite elements to meshfree particles. The Lagrangian formulation tracks material boundaries and properties without the errors typical in an Eulerian formulation as the material traverses large distances. A computation of a sphere impacting a bumper is shown to reproduce three regions in the debris cloud that are observed in tests: a front region composed of droplets of melted projectile and target, a middle region of fragmented projectile, and a back region of spalled projectile. Additional computations reproduce the observed traits that result from variations in the projectile shape and obliquity. The computation of a projectile impacting spaced plates demonstrates the ability of the method to model the damage to the rear plate of a Whipple shield for spacecraft protection.     

Clinical trial of a new lightwand device (Trachlight) to intubate the trachea

BACKGROUND: Transillumination of the soft tissue of the neck using a lighted stylet (lightwand) is an effective and safe intubating technique. A newly designed lightwand (Trachlight) incorporates modifications to improve the brightness of the light source as well as flexibility. The goal of this study was to determine the effectiveness and safety of this device in intubating the trachea of elective surgical patients. METHODS: Healthy surgical patients were studied. Patients with known or potential problems with intubation were excluded. During general anesthesia, the tracheas were intubated randomly using either the Trachlight or the laryngoscope. Failure to intubate was defined as lack of successful intubation after three attempts. The duration of each attempt was recorded as the time from insertion of the device into the oropharynx to the time of its removal. The total time to intubation (TTI), an overall measure of the ease of intubation, was defined as the sum of the durations of all (as many as three) intubation attempts. Complications, such as mucosal bleeding, lacerations, dental injury, and sore throat, were recorded. RESULTS: Nine hundred fifty patients (479 in the Trachlight group and 471 in the laryngoscope group) were studied. There was a 1% failure rate with the Trachlight, and 92% of intubations were successful on the first attempt, compared with a 3% failure rate and an 89% success rate on the first attempt with the laryngoscope (P not significant). All failures were followed by successful intubation using the alternate device. The TTI was significantly less with the Trachlight compared with the laryngoscope (15.7 +/- 10.8 vs. 19.6 +/- 23.7 s). For laryngoscopic intubation, the TTI was longer for patients with limited mandibular protrusion and mentohyoid distance, with a larger circumference of the neck, and with a high classification according to Mallampatti et al. However, there was no relation between the TTI and any of the airway parameters for Trachlight. There were significantly fewer traumatic events in the Trachlight group than in the laryngoscope group (10 vs. 37). More patients complained of sore throat in the laryngoscope group than in the Trachlight group (25.3% vs. 17.1%). CONCLUSIONS: In contrast to laryngoscopy, the ease of intubation using the Trachlight does not appear to be influenced by anatomic variations of the upper airway. Intubation occasionally failed with the Trachlight but in all cases was resolved with direct laryngoscopy. The failures of direct laryngoscopy were resolved with Trachlight. Thus the combined technique was 100% successful in intubating the tracheas of all patients.     

Using rainbow net simulation to measure fault tolerance in a multiprocessor

The Rainbow net simulation technique is applied to modelling the impact of system load and fault handling on the availability of a fault-tolerant multiprocessor architecture. Rainbow nets are described along with the motivation for creating this modelling technique. A Rainbow net fault-handling model is created for the fault-tolerant multiprocessor architecture and the topology is shown to remain constant in size, independent of the number of processor, memory and I/O elements configured in the system. Simulation is performed with a varying load in terms of the number of active jobs the system must support. Results are given showing how the fault-tolerant capability varies with load. Two new metrics for evaluating fault tolerance are introduced; namely full fault-tolerability and partial fault-tolerability. They are based on simple observations in the model.     

Fatigue crack growth analysis of welded aluminium RHS T-joints with manipulated residual stress level

The fatigue life of a welded aluminium T‐joint made from beams with rectangular hollow section (RHS) has been predicted using a crack propagation analysis and compared with experimental results from joints with different residual stress levels. To include the effect of the residual stresses, the stress ratio was calculated at the weld toe and, via Walker's equation, introduced into the analysis. How to obtain the Walker exponent has been discussed in detail. The introduction of a stress ratio at the weld toe provides good agreement between the experimentally and analytically found S–N curves. The effect of the residual stress was successfully included in the analysis.     

New intramolecular effect observed for polyesters: An anomeric effect

A series of polyesters was prepared to evaluate hydrolytic stability as a function of cyclohexyl dibasic acid content. The three cyclohexyl dibasic acids: 1,2; 1,3; and 1,4 were formulated into polyesters with two glycols. The proportion of cis and trans isomers was evaluated via ¹H NMR. The hydrolytic stability of short chain polyesters was evaluated in an acetone/water mixture which solubilized the polyesters to mimic oligoester behavior within a thermosetting polyester coating environment. The rate of hydrolysis was monitored by acid titration and corroborated by GPC. Surprisingly, 1,2-cylohexyl diacid-based polyesters were robust, and 1,3-cyclohexyl diacid-based polyesters were the most susceptible to hydrolysis. Evidently, a 1,2-anchimeric effect for cyclohexyl dibasic acid polyesters was not an important consideration, while the 1,3-cyclohexyl ester interaction was. Consequently, an anomeric effect was proposed. Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 12–14, 2003, in Philadelphia, PA.     

Children, robotics, and education

Popular interest in robotics has increased astonishingly in the last few years. Robotics is seen by many as offering major new benefits in education at all levels. Before rushing to exploit this popularity, educators should ask serious questions about the universality and longevity of the robotics phenomenon. Is it a fashion? To be useful, the energy released by robotics must be sustained and universal, and the means of exploiting it must be systematic. Universities define their own robotics curriculum, but most schools lack both the resources and the freedom to do this, and must work with a national curriculum. If it can be shown that robotics has sustained potential in education, it seems inevitable that new ways need to be found to integrate it into the school curriculum.     

Tilted superlattice composition profile determined by photoluminescence and thermal disordering

The composition profile of an (AlAs)_1/2(GaAs)_1/2 tilted superlattice is characterized for the first time. The tilted superlattice sample is thermally disordered, and the energy of the direct band gap photoluminescence peak is measured as a function of increasing layer interdiffusion. The shift in the photoluminescence peak energy after completely disordering the tilted superlattice is 39 meV. A theoretical model is used to simulate the change in band gap as a function of layer interdiffusion for several composition profiles. The profile that gives the best fit to the experimental data is chosen. The tilted superlattice composition profile is found to be sinusoidal, varying from Al_0.40Ga_0.60As to Al_0.60Ga_0.40As.     

The effects of guided tissue regeneration and fixation technique on osseous wound healing in rabbit zygomatic arch osteotomies

So called lethal midline granuloma is of great clinical and theoretical interest. Recent evidence has shown that most lethal midline granulomas are associated with a T-cell phenotype and they are therefore referred to as nasal T-cell lymphomas (NTCL). Immunohistochemical studies, however, have shown peculiar phenotypic features such as expression of natural killer (NK)-cell-related markers and extensive T-cell antigen loss including absence of expression of alpha beta T-cell receptor (TCR). In this study, we reported genotypic and immunohistochemical features in two cases of lethal midline granuloma. The histopathological diagnosis of the biopsy specimens was polymorphic reticulosis/midline malignant reticulosis. Both cases displayed a CD2+, CD3-, CD3 epsilon+, CD4-, CD8-, CD16-, CD56+ phenotype, suggesting that these tumors may be peripheral T-cell lymphomas with extensive loss of T-cell antigens and expression of NK cell antigen (CD56), or, alternatively, NK cell neoplasias. No TCR beta gene rearrangement was detected in these cases. Monoclonal Epstein-Barr virus (EBV) genome was detected in each specimen by Southern blot hybridization. The tumor cells in one of the two cases expressed latent membrane protein (LMP). These findings support the concept that lethal midline granuloma constitutes a distinct group of lymphomas that, in addition to their peculiar clinical features, exhibits the phenotype of extensive loss of T-cell antigens and expression of the NK cell antigen, as well as harbors the EBV. In view of the LMP-transforming potential, these data suggest that EBV may play a role in the pathogenesis of lethal midline granuloma.