Performance Study of a Closed-Type Heat Pump Tumble Dryer Using a Simulation Model and an Experimental Set-Up

In the interests of competitiveness, manufactures of tumble dryers are seeking to reduce both their electricity use and the drying time. This study examines how the cylinder volume of the compressor and the total heat transfer of the condenser influence the drying time and electricity use in a heat pump tumble dryer. A transient simulation model was developed and compared to an experimental set-up with good similarity. The simulations show that increasing the cylinder volume of the compressor by 50% decreases the drying time by 14% without using more electricity.     

Kinetic modeling of Fe‐BEA as NH3‐SCR catalyst—effect of phosphorous

The focus of this work is to investigate whether a previously developed microkinetic deactivation model for hydrothermally treated Fe‐BEA as NH₃‐SCR catalyst can be applied to describe chemical deactivation of Fe‐BEA due to phosphorous exposure. The model describes the experiments well for Fe‐BEA before and after phosphorous exposure by decreasing the site density, representing deactivation of sites due to formation of metaphosphates blocking the active iron sites, while the kinetic parameters are kept constant. Furthermore, the results show that the activity for low‐temperature selective catalytic reduction (SCR) is very sensitive to loss of active monomeric iron species due to phosphorous poisoning compared to high‐temperature SCR. Finally, the ammonia inhibition simulations show that exposure to phosphorous may affect the internal transport of ammonia between ammonia storage sites buffering the active iron sites, which results in a lower SCR performance during transient conditions. © 2014 American Institute of Chemical Engineers AIChE J, 61: 215–223, 2015     

Behavior of internal stakeholders in project portfolio management and its impact on success

Stakeholder behavior and stakeholder management are key success factors within project portfolio management (PPM). This empirical study of 197 project portfolios investigates the effect of the intensity of engagement (IoE) of portfolio-internal stakeholders on project portfolio success. We show that the effect of stakeholders is phase-specific and that role clarity as a measure of PPM maturity affects the nature of the relationship between the IoE of stakeholders and portfolio success. The effects of the IoE of senior managers on success are not clearly positive with regard to strategic portfolio structuring and are even negative in operative portfolio steering in established PPM systems. In immature PPM systems, line managers tend to take advantage of their position in resource management. Surprisingly, the influence of portfolio managers in portfolio steering is insignificant. Altogether, this paper shows the diverse effect of the IoE of stakeholders on portfolio success. This study enriches project research by applying stakeholder theory to the project portfolio context and offers practical guidance for further professionalizing PPM.     

Multicriteria optimization as enabler for Sustainable Ceramic Matrix Composites

Over the past 40 years, development of Ceramic Matrix Composites (CMCs) has focused mainly on the improvement of material performance and optimization of cost-efficient production routes. Recently, more fields of application have opened up for CMCs, in which environmental impacts are relevant. These impacts have barely been investigated so far but receive growing interest due to increasing awareness of the environmental consequences. Our innovative approach frames material properties in relation to environmental impacts (e.g., global warming potential in CO₂ emission) by varying process parameters to balance optimum performance against environmental considerations. First, the process of wet filament winding has been investigated up to the Carbon Fiber Reinforced Plastic (CFRP) state by changing both the curing and tempering temperatures. During the production of CFRP plates, mass and energy flows were tracked in each step. Three point-bending and interlaminar shear tests have been performed on the resulting samples to identify basic mechanical properties. The environmental impacts are determined by a cradle-to-gate Life Cycle Assessment (LCA), using the software SimaPro. The resulting tradeoffs between mechanical properties and environmental impacts show nonlinear behavior, thus revealing optimum points above which improved mechanical properties are associated with significantly higher CO₂ emissions.     

Short fiber-reinforced oxide fiber composites

This paper presents a novel fiber spraying process for the manufacturing of short fiber bundle-reinforced Nextel™ 610/Al₂O₃-ZrO₂ oxide fiber composites (SF-OFC) and its characterization. First, the influence of varying fiber lengths (7, 14, and 28 mm, continuous fibers) and fiber orientations (unidirectional 0°, quasi-isotropic, ±45°) was investigated using hand-laid SF-OFC. Due to the weak matrix, the hand-laid material exhibited a strongly fiber-dominated material behavior, that is, variations in fiber length and orientation had a strong influence on the material properties. Second, the automated sprayed SF-OFC, however, exhibited a random orientation of the fiber bundles, which resulted in in-plane isotropic material properties. Average bending strengths of up to 177 MPa, strains of .39%, and a quasi-ductile fracture behavior were achieved. The strain was, therefore, in the range of fabric-reinforced OFC. While the bending strength of the SF-OFC was somewhat lower than that of fabric-reinforced OFC with the fiber orientation parallel to the loading direction, it was more than two times higher than the strength in 45° direction relative to the fabric reinforcement. Combined with good drapability and lower material costs compared to fabric-reinforced OFC, SF-OFC is, therefore, a promising material for industrial applications.     

Predicting the electrospinnability of polymer solutions with electromechanical simulation

The number of polymers successfully electrospun is increasing, and methods are needed predict the electrospinnability of polymers. With such methods, researchers should consider the polymer solution parameters and perform measurements in conditions that mimic the electrospinning process. A novel test method based on the electromechanical simulation of the fiber formation was developed. We formed fibers by mechanically dragging a conductive ball from the solution at an applied voltage and measuring the electrical current. The changes in the time of the electrical current (the ball current) reflect the fiber‐formation process, which depended on certain polymer solution properties (e.g., viscosity, surface tension, liquid flow) and on the influence of charges on the fiber surface. The data obtained with the proposed method was compared with experimental data from electrospinning trials with the spinneret and bubble electrospinning. The results demonstrate that the ball‐current method made it possible to predict the polymer solution behavior in the electrospinning process. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41091.     

Cellulose/acrylic acid copolymer blends for films and coating applications

Enzymatically treated cellulose was dissolved in a NaOH/ZnO solvent system and mixed together with poly(ethylene‐co‐acrylic acid) (PE‐co‐AA) or poly(acrylamide‐co‐acrylic acid) (PAA‐co‐AA) polymers, in order to improve the properties of dissolved cellulose and to prepare homogeneous cellulose‐based blends for films and coatings. The solution stage properties of the blends were evaluated by rheological methods and the precipitated dry blends were characterized by dynamic mechanical analysis, differential scanning calorimetry, and scanning electron microscopy. Paperboard coating tests done at laboratory scale showed dissolved cellulose/acrylic acid copolymer‐based blends function well as coating materials. All of the tested blends showed a good resistance against grease in the coating trials, having grease resistance from 60 to 69 days despite a very thin (～2 µm) coating layer. In addition, cellulose/PE‐co‐AA coating showed improved water vapor and oxygen barrier properties when compared with neat dissolved cellulose‐coated paperboard. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40286.     

ER Stress in ERp57 Knockout Knee Joint Chondrocytes Induces Osteoarthritic Cartilage Degradation and Osteophyte Formation

Ageing or obesity are risk factors for protein aggregation in the endoplasmic reticulum (ER) of chondrocytes. This condition is called ER stress and leads to induction of the unfolded protein response (UPR), which, depending on the stress level, restores normal cell function or initiates apoptotic cell death. Here the role of ER stress in knee osteoarthritis (OA) was evaluated. It was first tested in vitro and in vivo whether a knockout (KO) of the protein disulfide isomerase ERp57 in chondrocytes induces sufficient ER stress for such analyses. ER stress in ERp57 KO chondrocytes was confirmed by immunofluorescence, immunohistochemistry, and transmission electron microscopy. Knee joints of wildtype (WT) and cartilage-specific ERp57 KO mice (ERp57 cKO) were analyzed by indentation-type atomic force microscopy (IT-AFM), toluidine blue, and immunofluorescence/-histochemical staining. Apoptotic cell death was investigated by a TUNEL assay. Additionally, OA was induced via forced exercise on a treadmill. ER stress in chondrocytes resulted in a reduced compressive stiffness of knee cartilage. With ER stress, 18-month-old mice developed osteoarthritic cartilage degeneration with osteophyte formation in knee joints. These degenerative changes were preceded by apoptotic death in articular chondrocytes. Young mice were not susceptible to OA, even when subjected to forced exercise. This study demonstrates that ER stress induces the development of age-related knee osteoarthritis owing to a decreased protective function of the UPR in chondrocytes with increasing age, while apoptosis increases. Therefore, inhibition of ER stress appears to be an attractive therapeutic target for OA.     

Pre-adolescent children exhibit lower aerosol particle volume emissions than adults for breathing,speaking, singing and shouting

Speaking and singing are activities linked to increased aerosol particle emissions from the respiratory system, dependent on the utilized vocal intensity. As a result, these activities have experienced considerable restrictions in enclosed spaces since the onset of the COVID-19 pandemic due to the risk of infection from the SARS-CoV-2 virus, transmitted by virus-carrying aerosols. These constraints have affected public education and extracurricular activities for children as well, from in-person music instruction to children’s choirs. However, existing risk assessments for children have been based on emission measurements of adults. To address this, we measured the particle emission rates of 15 pre-adolescent children, all eight to ten years old, with a laser particle counter for the test conditions: breathing at rest, speaking, singing and shouting. Compared with values taken from 15 adults, emission rates for breathing, speaking and singing were significantly lower for children. Particle emission rates were reduced by a factor of 4.3 across all conditions, whereas emitted particle volume rates were reduced by a factor of 4.8. These data can supplement SARS-CoV-2 risk management scenarios for various school and extracurricular settings.