Dynamic strain aging and hydrogen-induced softening in alpha titanium

Compression tests were carried out on samples of commercial-purity titanium charged with up to 4.7 at. pct hydrogen. Strain rates of 10⁻³ to 1 s⁻¹ were employed and testing was limited to the α phase field at temperatures of 773 to 973 K. The dependences of the flow stress on strain, strain rate, and temperature were determined. A plateau or bulge appeared in the temperature and strain-rate dependences of the flow stress, and the work-hardening rate also showed peaks. Serrations were observed on some of the stress-strain curves. All these features indicated that dynamic strain aging (DSA) was occurring. Analysis of the results (together with data from other authors) indicates that there are three ranges of DSA behavior in this material within the experimentally investigated temperature range; these appear to be associated with the diffusion of iron, carbon, and oxygen, respectively. Alloying with hydrogen decreases the magnitude of the DSA attributable to these elements and displaces the phenomenon to higher temperatures and/or to lower strain rates. The dependence on strain rate and temperature of the relative softening attributable to hydrogen addition was determined. The results indicate that hydrogen-induced softening is related to the occurrence of DSA in this temperature range. Possible explanations for this relationship are discussed. O.N. SENKOV, on leave from the Institute of Solid State Physics, Russian Academy of Sciences, Moscow Region 142432, Russia     

Results of reconstructive surgery in renal hypertension]

A traumatic macular hole has never been seen immediately after the causal accident. We examined a case of macular hole within half an hour of the injury and photographed it within three hours. We comment on the genesis of traumatic macular edema.     

Experimental studies of the force to extrude a rate sensitive material

Distinctions are drawn between three mean strain rates in extrusion: those averaged over the accumulated strain, the distance travelled through the die, and the elapsed time. It is shown that when the strain rate varies, the mean strain rate based on strain is always the greatest, and the mean strain rate based on time the smallest. Three further mean strain rates are introduced, which are root mean power (RMP) values of the above strain rates. Conventional estimates of the extrusion pressure for frictionless, homogeneous flow are based on rate insensitive analyses and lead to pressures proportional to the mean strain rate based on time. When the rate sensitivity during flow is taken into account, the calculated pressure is shown to be a function of the RMP strain rate based on accumulated strain, which is considerably greater than the mean strain rate based on time. Experiments are described in which ice was extruded by the indirect process, leading to nearly frictionless, homogeneous flow. Extrusion ratios of 4, 9, 25, 81, and 144 were used. In the first series of experiments, the ram velocity was adjusted to give the samerate insensitive (i.e. time-based) mean strain rate for all the dies. In the second series of experiments, the ram velocity was adjusted to give the samerate sensitive (i.e. RMP) mean strain rate for all the dies. In all cases the extrusion pressure was proportional to the RMP strain rate and not to the time-based strain rate. The rate sensitivity correction factor is also described.     

Voiding pressure as it relates to outlet and/or sphincteric resistance

Electrically quantitated and controlled detrusor contraction can produce either minimal or excessive rise in intravesical pressure depending upon openness or occlusion of the bladder outlet. Higher rise in intravesical pressure thus does not imply stronger detrusor contraction but should be viewed as a reflection of the outflow resistance mechanism. Possible damaging hydrodynamic effect of sudden partial or complete functional occlusion of the bladder outlet by intermittent or sustained voluntary sphincter activity is illustrated.     

Screening for enzyme inhibitors by surface plasmon resonance combined with mass spectrometry

We have developed a novel strategy to identify enzyme inhibitors that interact directly with their enzyme targets. In the approach, an enzyme is immobilized on a sensor chip, and it is determined whether the immobilized enzyme is still active by incubation with model substrates and mass spectrometric analysis of the products. Putative inhibitors or mixtures containing putative inhibitors are then injected over the sensor chip for binding analysis with surface plasmon resonance. It is then tested whether the bound compounds inhibit the enzymatic activity by subsequent incubation with the model substrate and mass spectrometric analysis. If the bound compound inhibits the enzyme, the inhibitor is eluted from the enzyme and characterized by mass spectrometry. To test the strategy, it has been applied to the well-characterized interaction between trypsin and pure bovine pancreas trypsin inhibitor. Furthermore, fractions of plant extracts were screened for binding to and inhibition of carboxypeptidase B.     

Variations in lipid composition and sound velocity in melon from the North Atlantic pilot whale,Globicephala melaena melaena

Nonpolar lipids and sound velocity at different distances from the skin surface within a sample of pilot whale melon were studied. Thin layer chromatography, sensitive radioisotopic methods, and an ultrasonic echo scanner were used. Wax esters had a maximum concentration at 11–12 cm from the skin surface. Non- and monoisovalero triglycerides both exhibited a minimum at 8–10 cm, whereas the diisovalero species increased steadily from the skin surface towards the center of the pilot whale head. A minimum of sound velocity, ca. 1340 m/s, was found at 9–11 cm, thus coinciding with a region rich in isovaleric acid esterified in wax and diisovalero triglycerides. These findings are compatible with predictions based on the known correlations between lipid structure and sound velocity. Consequently, additional evidence for refraction of sound in pilot whale melon is presented. This is important in understanding the system of echolocation of toothed whales.     

Demand-controlled desynchronization of oscillatory networks by means of a multisite delayed feedback stimulation

We study the potential of delayed feedback stimulation administered via multiple sites to control the synchronization and the spatio-temporal activity pattern within a network of oscillators. Two models with different levels of complexity are investigated: an ensemble of phase oscillators is used to study and analyze the effects of the stimulation in detail and a microscopic model is presented to exemplify the effectiveness of the method in terms of a stable desynchronization continuously maintained under realistic conditions. The investigation shows that depending on the spatial stimulation profile a multi-cluster state or a fully desynchronized state results. Both states are characterized by a strong suppression of the first order parameter indicating a strong desynchronization. Multisite delayed feedback stimulation realizes a demand-controlled stimulation which stabilizes the desired desynchronized state while the used stimulation current is minimized. We propose the method to be tested as a therapy of diseases characterized by pathological synchronization and for the therapy of defective neuronal pattern generators.     

Reconstruction of 3D Object Meshes from Silhouette Images

In this work we propose a method for computing mesh representations of 3D objects reconstructed from a set of silhouette images. Our method is based on the polygonization of volumetric reconstructions by using a modified version of the dual contouring method. In order to apply dual contouring on volumetric reconstruction from silhouettes we devised a method that is able to determine the discrete topology of the surface in relation to the octree cells. We also developed a new scheme for computing hermitian data representing the intersections of conic volumes with the octree cells and their corresponding normals with subpixel accuracy. Due to the discrete and extremely noisy nature of the data used in the reconstruction we had to devise a different criterion for mesh simplification that applies topological consistency tests only when the geometric error measure is beyond a given tolerance. We present results of the application of the proposed method in the extraction of a mesh corresponding to the surface of objects of a real scene.