Detection of Borreliae in Archived Sera from Patients with Clinically Suspect Lyme Disease

The diagnoses of Lyme disease based on clinical manifestations, serological findings and detection of infectious agents often contradict each other. We tested 52 blind-coded serum samples, including 20 pre-treatment and 12 post-treatment sera from clinically suspect Lyme disease patients, for the presence of residual Lyme disease infectious agents, using nested PCR amplification of a signature segment of the borrelial 16S ribosomal RNA gene for detection and direct DNA sequencing of the PCR amplicon for molecular validation. These archived sera were split from the samples drawn for the 2-tier serology tests performed by a CDC-approved laboratory, and are used as reference materials for evaluating new diagnostic reagents. Of the 12 post-treatment serum samples, we found DNA evidence of a novel borrelia of uncertain significance in one, which was also positive for the 2-tier serology test. The rest of the post-treatment sera and all 20 control sera were PCR-negative. Of the 20 pre-treatment sera from clinically suspect early Lyme disease patients, we found Borrelia miyamotoi in one which was 2-tier serology-negative, and a Borrelia burgdorferi in two—one negative and one positive for 2-tier serology. We conclude that a sensitive and reliable DNA-based test is needed to support the diagnosis of Lyme disease and Lyme disease-like borreliosis.     

Micromorphological studies of surface densified wood

Scots pine (Pinus sylvestris L.) wood was surface densified in its radial direction in an open press with one heated plate to obtain a higher density on the wood surface whilst retaining the overall thickness of the sample. This study investigated the effect of temperature (100, 150 and 200 °C) and press closing speed (5, 10 and 30 mm/min, giving closing times of 60, 30 and 10 s, respectively) on the micromorphology of the cell-wall, as well as changes occurring during set-recovery of the densified wood. The micromorphology was analysed using scanning electron microscopy (SEM) combined with a sample preparation technique based on ultraviolet-excimer laser ablation. Furthermore, the density profiles of the samples were measured. Low press temperature (100 °C) and short closing time (10 s) resulted in more deformation through the whole thickness, whilst increasing the temperature (150 and 200 °C) and prolonging the closing time (30 and 60 s) enabled more targeted deformation closer to the heated plate. The deformation occurred in the earlywood regions as curling and twisting of the radial cell-walls, however, no apparent cell-wall disruption or internal fracture was observed, even at low temperatures and fast press closing speed, nor after soaking and drying of the samples. In the SEM-analysis after soaking and drying, it was noticed that the cells did not completely recover their original form. Thus, part of the deformation was considered permanent perhaps due to viscoelastic flow and plastic deformation of the cell-wall components.     

Mathematical and computational models of drug transport in tumours

The ability to predict how far a drug will penetrate into the tumour microenvironment within its pharmacokinetic (PK) lifespan would provide valuable information about therapeutic response. As the PK profile is directly related to the route and schedule of drug administration, an in silico tool that can predict the drug administration schedule that results in optimal drug delivery to tumours would streamline clinical trial design. This paper investigates the application of mathematical and computational modelling techniques to help improve our understanding of the fundamental mechanisms underlying drug delivery, and compares the performance of a simple model with more complex approaches. Three models of drug transport are developed, all based on the same drug binding model and parametrized by bespoke in vitro experiments. Their predictions, compared for a ‘tumour cord’ geometry, are qualitatively and quantitatively similar. We assess the effect of varying the PK profile of the supplied drug, and the binding affinity of the drug to tumour cells, on the concentration of drug reaching cells and the accumulated exposure of cells to drug at arbitrary distances from a supplying blood vessel. This is a contribution towards developing a useful drug transport modelling tool for informing strategies for the treatment of tumour cells which are ‘pharmacokinetically resistant’ to chemotherapeutic strategies.     

Combustion Reactivity of Rice Husk：An Experimantal and Numerical Investigation

The combustion reactivity of rice husk from New South Wales,ustralia was measured by heating cubical baskets in controlled environment and monitoring the centre temperature.Frank-Kamenetskii‘s ignition theory was used to calculate the activation energy,Results agreed well with tests on other cellulosic materials,Numerical simulations of temperature changes were carried out,using a special technique to deal with non-linearities in the heat conduction equation.The numerical Results indicate that the time factor should be taken into account when evaluating self-combustion risks.     

Modeling the thermal inactivation kinetics of heat-resistant Salmonella Enteritidis and Oranienburg in 10 percent salted liquid egg yolk

There is no suitable model for predicting thermal inactivation kinetics of Salmonella spp. for many types of liquid egg products, including salted liquid egg yolk, for use in updating U.S. Department of Agriculture (USDA) pasteurization guidelines. This is because, in part, of the variations in Salmonella strains and the changes in the processing of liquid egg products over the past 40 years. The objectives of the present study were to determine the thermal inactivation kinetics and to create a general thermal inactivation kinetics model that can be used for estimating log reductions of salmonellae in 10% salted liquid egg yolk for temperatures between 62.2 and 69°C. This model can be used by processors to help ensure adequate pasteurization. This was accomplished by studying the inactivation kinetics of a three-strain composite of heat-resistant Salmonella serovars Enteritidis and Oranienburg, inoculated into commercially processed 10% salted liquid egg yolk. The survival curves were convex, with asymptotic D-values. From these curves, a general model was developed to predict log reductions for given times at specified temperatures. For example, at a temperature of 67.3°C (153.1°F) for 3.5 min, our model predicts a 5-log reduction would be obtained, whereas with the current USDA minimum required pasteurization regimen (63.33°C [146°F] for 3.5 min), our model predicts that a reduction of only 2.7 log would be obtained. The results of this study provide information that can be used by processors to aid in producing safe, pasteurized egg yolk products, and for satisfying USDA pasteurization performance standards and developing industry guidance.     

The relationship between compliance with lens replacement and contact lens-related problems in silicone hydrogel wearers

Purpose

To evaluate the relationship between compliance with replacement frequency (RF) and contact lens (CL)-related problems in silicone hydrogel (SiHy) wearers.

Methods

501 SiHy wearers from seven optometry offices completed surveys regarding their lens wear and any CL related problems which they may have experienced in the preceding 12 months. File review was subsequently conducted at their optometry offices to confirm the information provided.

Results

49% of respondents were wearing 2-week replacement (2WR) and 51% 1-month replacement (1MR) SiHy lenses. 67% wore their lenses for longer than the manufacturers’ recommended RF (MRRF) and 60% for longer than their optometrist's recommended RF (ORRF). The mean RF was 2.6× the MRRF for 2WR and 1.5× for 1MR wearers (p < 0.001) with median values of 31 and 37 days, respectively. Twenty-three percent reported signs or symptoms consistent with potential complications relating to CL wear. This rate was significantly higher for wearers who were non-compliant with the ORRF than compliant wearers (26% versus 18%, p = 0.028). It was also higher for those multipurpose solution users who reported never/almost never rubbing and rinsing their lenses when compared with those who did this every night (29% versus 17%, p = 0.007).

Conclusions

Two thirds of the SiHy wearers did not comply with the MRRF and 2WR wearers stretched the replacement interval of their lenses to a greater degree than 1MR wearers. Failing to replace lenses when recommended and failing to rub and rinse lenses were associated with a higher rate of patient-reported CL problems.     

A comparison between the finite element and frequency response methods in the assessment of thermal striping damage

When incompletely mixed, hot and cold fluid streams pass adjacent to the surface of a component or structure, and cause thermal striping on the surface. The existing methods of assessment of the consequent thermal fatigue damage have been implemented in the computer codes CLOUDBURST, TBL and STRIPE, and these have been shown to be in good agreement. Analysis of temporally random striping is possible in two of the methods, whereas use of the finite element method in such a fatigue analysis may lead to impractically long run times. However, for the special case of sinusoidal patterns of striping, comparison is made in this paper between TBL and the finite element method for the assessment of thermal striping damage.

A fully restrained, single edge cracked plate and a circumferentially cracked cylinder, axially restrained and unrestrained, have been subjected to sinusoidal surface striping for various representative temporal frequencies. The resulting stress intensity factor fluctuations have been determined for various crack depths using the finite element computer code ABAQUS and the analytical code TBL. Good comparisons have been obtained in all cases.