Integratable, high speed buried ridge DFB lasers fabricated on semi-insulating substrates

The fabrication of buried ridge DFB lasers on semi-insulating substrates is described. A novel contacting mechanism was employed to give a series resistance of less than 4 Omega . Devices were fabricated at both 1.3 and 1.53 mu m with lasing thresholds as low as 16 mA. Single longitudinal mode operation was achieved with SMSR greater than 30 dB at both wavelengths. The structure gives an inherently low capacitance, which together with low threshold currents, low series resistance and fabrication on SI substrates makes these devices suitable for integration and high speed applications.<>     

Phase error correcting vector modulator for personal communications network (PCN) transceivers

A technique is reported for correcting phase errors in vector modulators for application in PCN (personal communication network) transceivers. The technique uses an AM demodulation process to extract the phase error from the output signal, and uses the capability of direct digital frequency synthesisers to predistort the phase of the inphase and quadrature components separately. The phase predistortion method can achieve accuracies of less than 0.05 degrees phase error, which can be further improved by increasing the number of bits in the synthesis.<>     

A modified hot processing strategy for beef: reduced electrical energy consumption in carcass chilling

A beef processing strategy for improving energy and labour efficiencies, modified hot processing (MHP), was developed in a research abattoir. The work reported herein investigated carcass chilling rates and electrical energy usage in the chilling of carcasses that were processed using this approach. The MHP procedure removes the lower value cuts from the dressed carcass along with associated bone and fat. The remaining high value meat (posterior carcass quarter) is chilled in the usual manner, while the low value cuts are immediately processed (e.g. reduced into pre-blended, salted, chilled meat for emulsion-type products; rendered; directly processed as fresh, hot-boned meat, etc.). Carcasses prepared by the MHP method were dissected to quantify the amounts of lean meat, separable fat and bone removed in the procedure. These data were used with a simple model to predict the amount of chilling energy that could be saved by applying MHP prior to chilling. Electrical power to operate a blast chilling facility containing carcasses that had been processed either by conventional processing or by MHP methods was monitored and recorded, and the resulting data was used to confirm the model result. The MHP procedure reduced the refrigeration load for beef chilling by as much as 51% (P < 0·05). The amount of chilling energy to be saved would depend upon the methods employed to further process the low value tissues, and was calculated to be no less than 7%. The time for the reduced MHP carcass quarters to chill to 10°C at the fat-muscle interface of the longissimus dorsi muscle (12/13 rib) was shorter for MHP carcasses than for conventional carcasses (5·77 h vs 7·08 h, respectively) (P < 0·05). However, the times to chill the deep hip location of MHP hind quarters and conventional beef sides were not significantly different (P < 0·05).     

Deep levels in p- and n-type InGaAsN for high-efficiency multi-junction III–V solar cells

DLTS measurements have been performed on InGaAsN. Four hole traps have been identified in 1.05 eV, p-type InGaAsN and the removal of a midgap trap (0.5 eV) during annealing has been correlated with improved bulk material properties. Improvements in MOCVD growth conditions resulted in a reduction of trap density in 1.05 eV, p-type InGaAsN. Increased indium and nitrogen composition has been correlated with higher defect concentrations in p-type InGaAsN. Two electron traps have been identified in 1.15 eV, n-type InGaAsN and annealing was found to reduce the density of the shallow electron trap.     

Corrosive Wear in Wet Ore Grinding Systems

JOM - Wear processes in ball and rod mills have recently received increased attention in order to increase efficiency and conserve grinding media. Direct removal of metal from the grinding media...     

Misreading liberalisation and privatisation: The case of the US energy utilities in Europe

In response to energy market liberalisation and privatisation initiatives promoted by the EU and other European states in the 1990s, a large number of US energy utilities expanded their activities in Europe, mainly through acquisitions. The size of their investment was, a decade later, matched by the ensuing scale of their retreat, wealth destruction and often forced exit. Combining interviews, industry studies, published financial data and company reports, this article examines critically their strategy and, in light of widespread failures, seeks to answer the question of what went wrong. It is argued that mistakes might have been avoided through greater appreciation of how market liberalisation evolves given changing government priorities and general sovereign risk.     

The installation and support of internationally distributed equipment for people with dementia

This paper describes the evaluation and support of assistive technology designed to increase the independence of people with dementia. Devices were evaluated by people with dementia in their own homes. Working with and supporting people with dementia requires relational skills not normally needed by installers and technical supporters.     

A computationally efficient discrete Backus-Gilbert footprint-matching algorithm

A computationally efficient discrete Backus-Gilbert (BG) method is derived that is appropriate for resolution-matching applications using oversampled data. The method builds upon existing BG methods and approximation techniques to create a modified set of BG coefficients. The method in its current form is restricted to a resolution-only minimization constraint, but in the future could be extended to use a simultaneous noise minimization constraint using a generalized singular value decomposition (GSVD) approach. A theoretical one-dimensional intercomparison is performed using a hypothetical sensor configuration. A comparison of the discrete BG method with a nondiscrete BG method shows that the new approach can be 250% more efficient while maintaining similar accuracies. In addition, an SVD approximation increases the computational efficiencies an additional 43%-106%, depending upon the scene. Several quadrature methods were also tested. The results suggest that accuracy improvements are possible using customized quadrature in regions containing known physical data discontinuities (such as along coastlines in microwave imagery data). The ability to recompute the modified BG coefficients dynamically at lower computational cost makes this work applicable toward applications in which noise may vary, or where data observations are not available consistently (e.g. in radio frequency interference contaminated environments).     

Solution Processable Monosubstituted Hexa‐Peri‐Hexabenzocoronene Self‐Assembling Dyes

Molecular organization behavior and visible light absorption ability are important factors for organic materials to be used in efficient bulk heterojunction solar cells applications. In this context, a series of monosubstituted fluorenyl hexa‐peri‐hexabenzocoronene (FHBC) are synthesized with the aim to combine the self‐association property of the FHBC unit with broadened light absorption of a small molecule organic dye, bisthienylbenzothiadiazole (TBT). Optical and electrochemical properties of the FHBC compounds vary according to their structures. Introduction of a TBT unit into the FHBC system broadens the absorption. All of the FHBC compounds show strong π–π intermolecular association in solution. X‐ray scattering measurements on thermally extruded filaments and thin films showed ordered alignment of these compounds in the solid state. In atomic force microscopy experiments, nanoscale phase separation is observed in thin films of FHBC and fullerene derivative blends. Solar cell devices with these compounds as donors are fabricated. FHBC compounds with the TBT unit show higher short circuit current while the high open circuit voltages are maintained. With C₆₀ derivative as acceptor, power conversion efficiency of 1.12% is achieved in the unoptimized solar cell devices under simulated solar irradiation. The efficiency was further improved to 1.64% when C₇₀ derivative was used as the acceptor.     

Free-Space Optical Communications for Next-generation Military Networks

There is a continuing need for increased capacity for military applications, especially in network-centric operational concepts that promote the use of information as fundamental for gaining superiority on the battlefield. As an example, the access to, and distribution of, sensor data is a major tenet of network-centric warfare and yet radio frequency (RF) links will struggle to provide the needed capacity. Free-space optical communications (FSOC) has the potential to meet these emerging military needs by offering dramatic increases in capacity. However, there are many technical challenges al multiple layers of the communications protocol stack. This article describes these challenges and discusses some mitigation approaches to provide a path to realizing this capability on the battlefield