Ethylene polymerization over MgO‐supported zirconocene catalysts

Supported zirconcene catalysts on a new support, MgO, were prepared and tested in ethylene polymerization. Three types of impregnation methods were employed to find an optimum supporting method for MgO. The direct impregnation of Cp₂ZrCl₂ on MgO showed low metal loading and polymerization activity, while the catalyst had a higher metal loading and polymerization activity when MgO was treated with methylaluminoxane (MAO) before supporting. Treatment of MgO with MAO during the supporting step invoked two types of catalytic sites, which was evidenced by the bimodal molecular weight distribution of the polymer products. MgO is considered to have potential as a support for metallocenes.     

Effects of surface roughness of substrates on the c-axis preferred orientation of ZnO films deposited by r.f. magnetron sputtering

The c-axis preferred orientation of ZnO film is the most important factor for its successful application in piezoelectric devices. The effects of surface roughness of the substrate on the c-axis preferred orientation of ZnO thin films, deposited by radio frequency magnetron sputtering, were investigated. During sputtering, the oxygen content in the argon environment used was varied from 0 to 70% at a total sputtering pressure of 10 mTorr. Very smooth Si, smooth evaporated Au/Si, smooth evaporated-Al/Si, and rough sputtered-Al/Si were used as substrates. Their r.m.s. roughnesses, as measured by atomic force microscopy, were 1.27, 17.1, 21.1 and 65-118 Å, respectively. The crystalline structure and the angular spread of the (0 0* 2) plane normal to the ZnO films were determined using X-ray diffraction and X-ray rocking curves, respectively. The crystallinity and the preferred c-axis orientation of the ZnO films were strongly dependent on the surface roughness of the substrates rather than on the oxygen content of the working environment or on the chemical nature of the substrate.     

Dual command travel times and miniload system throughput with turnover-based storage

We analyze travel times for automated storage/retrieval systems. In particular, we apply our travel time model to turnover-based storage systems and determine the mean and variance of dual command travel times. We present detailed numerical results for selected rack shape factors and ABC inventory profiles. We then investigate the effect of alternative rack configurations on travel time performance measures. We also show how to determine the throughput of miniload systems with turnover-based storage and exponentially distributed pick times.     

Performance analysis of OFDMA uplink systems with symbol timing misalignment

This letter presents our investigation for the effect of symbol timing errors in orthogonal frequency-division multiple access (OFDMA) uplink systems. We express the symbol timing errors between users as the symbol timing misalignments with respect to the desired user. Then, we derive an explicit expression of the signal-to-noise ratio (SNR) as a function of the maximum value of the symbol timing misalignments. Analyses and simulation results show that, to achieve an SNR of 20 dB, the maximum value of the symbol timing misalignments must be less than the cyclic prefix duration plus 6.25% of the useful symbol duration. Based on the resulting SNR degradation, we evaluate the SNR gain with guard subcarriers in order to mitigate the effect of the symbol timing misalignments.     

Pyrolysis of Miscanthus Giganteus and wood pellets: TG-FTIR analysis and reaction kinetics

Characterisation of two biomass fuels (pelletised Miscanthus Giganteus and wood) was performed using thermogravimetric analysis with measurement of products by means of Fourier transform infrared spectroscopy (TG-FTIR). Three heating rate profiles were applied (10, 30 and 100 °C/min), with a final temperature of 900 °C. HCN and HNCO were found to be the major N-products, while the NH₃ fraction was detected to a minor extent. Kinetic parameters were obtained from the TG-FTIR results using a model based on parallel first-order reactions with a Gaussian distribution of activation energies. On the basis of the above kinetic analysis and product yields, input files for the functional group-devolatilisation, vaporisation, cross-linking biomass-pyrolysis model were prepared. The fit of model parameters to TG-FTIR product-evolution data was found to be generally good, but the model-predicted yields for some species did not fit experimental data at all heating rates. Further improvements in the model are needed to resolve above difficulty.     

Simultaneous amplification by Er ions and SRS in an Er-doped germano-silica fiber

A flat signal gain over in the entire C- and L-bands by erbium (Er) ions' radiative transition and stimulated Raman scattering in an Er-doped germano-silica fiber can be obtained if proper values of the concentration of Er and background loss in a fiber core are obtained during the fiber fabrication process. The optimized conditions for the flat C- and L-band gain are analyzed as functions of Er concentrations. Even for a low-gain value provided by a germano-silica core fiber with a low Er concentration and an optimum fiber length, a relatively low pump is required to obtain the flat gain band.     

Inhibition effect of carbon dioxide on the oxidation of hydrogen over a platinum foil catalyst

This paper investigates the catalytic ignition of the H₂/O₂/CO₂ mixture on platinum in a stagnation flow at atmospheric pressure experimentally and numerically. We measure the ignition temperatures of the gas mixtures flowing towards resistively heated platinum with various composition ratios and various diluent gases of N₂, Ar and CO₂. Compared with N₂ or Ar, the CO₂ dilution shows higher ignition temperature by about 50 K, even at the same composition ratio. The ignition temperature increase is proportional to the dilution ratio. Through the numerical simulation, it is illustrated that higher ignition temperature is caused by the adsorption of CO₂ and following dissociation on platinum surface, which was to date considered negligible in catalytic combustion.     

Abnormal junction profile of silicided p+/n shallowjunctions: a leakage mechanism

The leakage mechanism in p⁺/n shallow junctions fabricated using Co silicidation and shallow trench isolation processes has been investigated using transmission electron microscopy (TEM) combined with selective chemical etching. TEM and TSUPREM-4 simulation results show that dopant profiles bend upward near the edge of the active region. The formation of the abnormal profile is attributed to transient enhanced diffusion induced by source/drain implantation. Based on the TEM and simulation results, it is suggested that the shallower junctions formed near the active edge can serve as a source for leakage current in the silicided p+ /n shallow junctions     

An efficient optimistic message logging scheme for recoverable mobile computing systems

A number of checkpointing and message logging algorithms have been proposed to support fault tolerance of mobile computing systems. However, little attention has been paid to the optimistic message logging scheme. Optimistic logging has a lower failure-free operation cost compared to other logging schemes. It also has a lower failure recovery cost compared to the checkpointing schemes. This paper presents an efficient scheme to implement optimistic logging for the mobile computing environment. In the proposed scheme, the task of logging is assigned to the mobile support station so that volatile logging can be utilized. In addition, to reduce the message overhead, the mobile support station takes care of dependency tracking and the potential dependency between mobile hosts is inferred from the dependency between mobile support stations. The performance of the proposed scheme is evaluated by an extensive simulation study. The results show that the proposed scheme requires a small failure-free overhead and the cost of unnecessary rollback caused by the imprecise dependency is adjustable by properly selecting the logging frequency.     

p53 gene therapy in vivo of herpatocellular and liver metastatic colorectal cancer

Tumor suppressor genes such as p53 contribute to the oncogenic process via loss-of-function mechanisms such as genetic mutation or complex formation with other cellular or viral proteins. p53 is mutated in approximately 50% of human tumors and has an important role in the genesis or progression of both colorectal and hepatocellular cancers. Colorectal cancer is leading cause of cancer mortality in the United States, whereas hepatocellular cancer is the leading worldwide cause of cancer death; the liver is a primary site of morbidity in both diseases. Because systemic tumor suppressor gene therapy is currently not feasible, we have chosen to develop a regional form of such therapy directed at primary or metastatic liver neoplasms. Gene replacement therapy with p53 is a promising new strategy to treat advanced human cancers.