Analysis on the thermal and electrical characteristics of impregnating materials for the bifilar winding-type superconducting fault current limiter

The resistive type high temperature superconducting fault current limiter (HTSFCL) limits the fault current with the resistance that generated by fault current. The generated resistance by fault current makes large pulse power which makes the operation of HTSFCL unstable. So, the cryogenic cooling system of the resistive type HTSFCL must diffuse and eliminate the pulse energy very quickly. Although the best way is to make wide direct contact area between HTS winding and coolant as much as possible, HTS winding also need the impregnation layer which fixes and protects it from electromagnetic force. This paper deals with thermal conductivity and dielectric strength of some epoxy compounds for the impregnation of high temperature superconducting (HTS) winding at 77 K. The measured data can be used in the optimal design of impregnation for HTS winding. Aluminar filling increased the thermal conductivity of epoxy compounds. Hardener also affected the thermal conductivity and the dielectric strength of epoxy compounds.     

Tunable multiwavelength fiber laser employing a comb filter based on a polarization-diversity loop configuration

A tunable multiwavelength fiber laser based on a semiconductor optical amplifier (SOA) is newly proposed. The proposed fiber laser employs a fiber comb filter based on a polarization-diversity loop configuration (PDLC) for the multiwavelength selection. The spectral characteristic of the comb filter is graphically explained by tracing the state of polarization (SOP) of the light propagating through the filter on the Poincare sphere. Particularly, the method of adjusting the filter characteristics is established with the help of the Poincare-sphere representation. The experimental results show that 18 laser lines oscillate with the signal to amplified spontaneous emission noise ratio over 25 dB. Particularly, all of the laser lines with a fixed channel spacing of /spl sim/ 0.8 nm can be continuously shifted by adjusting only a wave plate contained within the filter.     

Rapid Small-Scale Column Tests for Arsenate Removal in Iron Oxide Packed Bed Columns

Arsenate breakthrough in column studies with a porous granular ferric hydroxide (GFH) was investigated in model waters and groundwaters. In this study, the use of rapid small-scale column tests (RSSCTs) initially designed for simulating the removal of organic compounds by granular activated carbon was extended for arsenate adsorption onto GFH. Adsorption kinetic studies and a comparison of laboratory RSSCT performance versus pilot-scale performance suggests that proportional diffusivity (PD) RSSCT scaling approaches are more valid than constant diffusivity (CD) approaches for arsenate onto GFH. Adsorption densities from column tests (qcolumn) were calculated at the point in the breakthrough curve when arsenate equaled 10 μg/L in the column effluent. For a simulated 2.5 min empty-bed contact time (EBCT), a model water (pH=8.6) had qcolumn values of 0.99 to 1.5 mgAs/gGFH versus 0.02 to 0.28 mgAs/gGFH with a comparable pH and EBCT in a natural groundwater. The differences were attributed to the silica, phosphate, vanadium, and other adsorbable inorganics in the groundwater. At pH 7.6 to 7.8, qcolumn values from PD-RSSCTs in the three natural waters were comparable (1.5±0.3 mgAs/gGFH) and higher than CD-RSSCT qcolumn values (0.57±0.26 mgAs/gGFH) in the three natural waters. All the RSSCTs captured changes in water quality (source water and pH) and operational regimes (e.g., EBCTs) and could be used to aid in the selection and design of arsenic removal media for full-scale treatment facilities.     

不同结构活性炭对甲苯的吸附性能

考察了不同结构的活性炭样品对高浓度和低浓度甲苯蒸汽的吸附行为,采用低温(77 K)氮气吸附和129Xe-核磁共振方法对所用活性炭的结构进行了表征.并将活性炭对甲苯的吸附性能与其结构进行了关联.结果表明孔容积大的活性炭对高浓度甲苯蒸汽吸附容量大,而具有丰富微孔和较小平均孔径的活性炭对低浓度(2×10-5)甲苯蒸汽具有高的吸附容量.沥青基活性炭纤维对低浓度(2×10-5)甲苯蒸汽表现出较好的吸附能力.随着比表面积的增大,活性炭纤维对低浓度(2×10-5)甲苯蒸汽的吸附容量略有增加.OG5A,OG10A,OG15A和OG20A在30 ℃下对2×10-5甲苯蒸汽的饱和吸附容量分别为202 mg/g,219 mg/g,221 mg/g和235 mg/g.     

Magnetically induced vibration in a permanent-magnet brushless DC motor with symmetric pole-slot configuration

The paper reports a numerical and experimental study of magnetically induced vibration associated with rotor/stator eccentricity and imperfect magnetization for 8-pole 6-slot symmetric brushless dc (BLDC) motors. Magnetic forces and cogging torque are calculated for various slot angles by using the finite-element method (FEM). The results show that there is an optimal slot angle for minimum cogging torque, but this slot angle is not optimal for reducing magnetic forces. In the idle acoustics test, the motors with reduced magnetic forces show clear reduction at the expected frequencies while the motors with minimum cogging torque show no change at the cogging torque frequency, which implies unbalanced magnetic forces have greater effect on actual vibration of the spindle motor than cogging torque. The results show that the proper direction in motor design is to reduce unbalanced magnetic forces when both cogging torque and unbalanced magnetic forces are not achievable simultaneously.     

Wear and dynamic properties of piezoelectric ultrasonic motor with frictional materials coated stator

Piezoelectric ultrasonic motors have been studied, developed and utilized by researchers and companies all over the world. Ultrasonic motors (USM) produce rotational motion based on traveling waves made by the resonant vibrations of piezoceramic. These motors have been recently developed and utilized in practical applications. The dynamic properties and life of piezoelectric ultrasonic motors are strongly related to the frictional material Fused on the sliding surface. In this study, effects of frictional material properties on the performances of piezoelectric ultrasonic motors are investigated. It was possible to improve the torque of a traveling wave type ultrasonic motor by stator's coating.     

Optimization of a piezoelectric linear motor in terms of the contact parameters

The contact kinetics of piezoelectric linear motors determines the operational characteristics like speed and torque or transmitted mechanical power and efficiency. Piezoelectric linear motors are driven by tangential stress in the interface between tip of shaking beam and slider. A good contact between the tip and slider is necessary for a reliable analysis of the motor, which is needed for the optimization of its performance. The piezoelectric linear motor was fabricated and the characteristics of the motor were investigated by external conditions such as tip shape with different curvatures and contact force between the tip and the slider. It was found in this investigation that the optimal curvature of the tip and the contact force are curvature of 1 and 10, respectively, for the high actuating speed, and curvature of 1 and 40 N, respectively, for the high actuating force. Finally, tip shape has an influence on the characteristics of linear motor.     

Sampled- and continuous-time passivity and stability of virtual environments

We propose a new time-domain passivity observer (PO) and passivity controller (PC) which removes the constant-velocity assumption during one sample time, which was used in our previous PO/PC approach. A new sampled-time definition of passivity is introduced, and this new definition is compared with the previous sampled-time definition of passivity. Through this comparison, we propose the more accurate PO/PC approach. The proposed new PO/PC approach is applied to the "Excalibur" haptic interface system with very high stiffness (K = 120 kN/spl middot/m) virtual environment, and stable contact is demonstrated.     

Parallel Processing of First Order Linear Recurrence on SMP Machines

In this paper, we propose a new algorithm that analyzes the data dependency pattern in the first-order linear recurrence (FOLR) and transforms it into algebraically equivalent expanded form so that it can be processed in parallel using the threads on symmetric multiprocessor (SMP) machines. The transformation aims to eliminate the data dependencies in the naive nested form of the FOLR. However, as this transformation may result in extra multiplication operations, our algorithm examines the immanent overhead of the expanded form of the FOLR and generates a new hybrid form of the FOLR. The hybrid form combines nested and appropriately expanded form in order to make it suitable for parallel processing. The parallel algorithm based on the hybrid form of the FOLR is analytically examined and tested through implementation on SMP machines. The implementation details, such as the workload balancing between processors and the optimization of cache performance, are also discussed. The experimental results show that the parallel algorithm based on the hybrid form of the FOLR considerably improves the performance on SMP machines that have three of more processors.