On the implicit integration of rate‐dependent inelastic constitutive models

Although there are many different algorithms for the integration of inelastic constitutive models, the fully implicit backward Euler method has become the most popular one. In this study further investigations on the accuracy of the backward Euler method have been carried out. Also the performance of the discontinuous Galerkin family and some implicit Runge–Kutta time integrators is evaluated. By using a simple scalar model problem accuracy of some integrators is studied when a single finite time step is applied. Conclusions drawn from this scalar model problem has been verified to apply also to a full six‐dimensional strain space formulation by numerical means. Special emphasis is placed on rate‐dependent inelastic creep models. Copyright © 2005 John Wiley & Sons, Ltd.     

Dual Antenna Receivers for High Data Rate Terminals

In this paper, dual antenna receiver architectures are studied including RAKE, chip-level linear equalizer, and their combination. The arithmetic complexity of single and dual antenna receiver methods is analyzed. Cost of such receivers when implemented with customized hardware or software on application-specific instruction set processors (ASIP) is estimated. The study shows that feasible dual antenna detection can be obtained with less than 70% additional costs. More flexible implementation supporting several standards can be obtained with software but it requires higher power consumption due to additional memory.     

Variation in Birch (<Emphasis Type="Italic">Betula pendula</Emphasis>) Shoot Secondary Chemistry due to Genotype,Environment, and Ontogeny

Plant secondary chemistry is determined by both genetic and environmental factors, and large intraspecific variation in secondary chemistry has frequently been reported. The heritability of specific tree secondary metabolites is, however, mostly unknown. We tested the effect of plant genotype, environment, and ontogeny on the variation in shoot secondary chemistry of juvenile and mature European white birches (Betula pendula). Phenolic compounds and triterpenoids were analyzed in 30 naturally regenerated 20-year-old parental trees and micropropagated plantlets that originated from 14 of those same parental trees, planted at four growing sites. Most of the variation for phenolic compounds was explained by differences between parental trees, whereas triterpenoids had a high variation both between parental trees and within the canopy of individual tree. The effect of ontogeny was strong for some individual compounds. In mature trees, the amount of triterpenoids was less than 1 mg/g (DW), whereas the concentration in juvenile plantlets was up to 64 mg/g (DW). Clonal plantlets and parental trees were generally quite similar in their phenolic contents, but there were significant differences for all analyzed compounds among clones. Environment had no significant effect on the accumulation of some compounds, whereas for others, a significant environmental effect and/or significant genotype by environment interaction was found. These results suggest that birch shoot secondary chemistry is under strong genetic control and that the environmental effects depend on the studied chemical trait.     

Tryptose-sulfite-cycloserine-egg yolk agar membrane filter method for the detection of Clostridium perfringens in water

A report on the use of the tryptose-sulfite-cycloserine-egg yolk agar membrane filter method for the detection of Clostridium perfringens in natural and artificial water samples is given. The method, which was compared with a tube colony count method, proved to be reliable and simple for practical use.     

BelBaieV夹网成形器

BelBaieV继承了Beloit BelBaiell和BelBaieⅢ型夹网成形器成纸匀度良好的特征,可提高脱水能力,减少两面差,并提高纸机潜在的工作车速,从而提高纸机的生产能力.本文介绍了BelBaieV成形器的结构特征、优点、使用效果等.     

Oligonucleotide array-in-well platform for detection and genotyping human adenoviruses by utilizing upconverting phosphor label technology

We have developed a robust array-in-well test platform based on an oligonucleotide array, combining advantages of simple instrumentation and new upconverting phosphor reporter technology. Upconverting inorganic lanthanide phosphors have a unique property of photoluminescence emission at visible wavelengths under near-infrared excitation. No autofluorescence is produced from the sample or support material, enabling a highly sensitive assay. In this study, the assay is performed in standard 96-well microtiter plates, making the technique easily adaptable to high-throughput analysis. The oligonucleotide array-in-well assay is employed to detect a selection of ten common adenovirus genotypes causing human infections. The study provides a demonstration of the advantages and potential of the upconverting phosphor-based reporter technology in multianalyte assays and anti-Stokes photoluminescence detection with an anti-Stokes photoluminescence imaging device.     

Effect of lubricant on the formation of heavy-duty diesel exhaust nanoparticles

The effect of lubricants on nanoparticle formation in heavy-duty diesel exhaust with and without a continuously regenerating diesel particulate filter (CRDPF) is studied. A partial flow sampling system with a particle size distribution measurement starting from 3 nm, approximately, is used. Tests are conducted using four different lubricant formulations, a very low sulfur content fuel, and four steady-state driving modes. A well-documented test procedure was followed for each test. Two different kinds of nanoparticle formation were observed, and both were found to be affected bythe lubricant but in differentway. Without CRDPF, nanoparticles were observed at low loads. No correlation between lubricant sulfur and these nanoparticles was found. These nanoparticles are suggested to form mainly from hydrocarbons. With CRDPF, installed nanoparticles were formed only at high load. The formation correlated positively with the lubricant (and fuel) sulfur level, suggesting that sulfuric compounds are the main nucleating species in this situation. Storage effects of CRDPF had an effect on nanoparticle concentration as the emissions of nanoparticles decreased over time.     

Low-temperature aerosol flow reactor method for preparation of surface stabilized pharmaceutical nanocarriers

Nanoparticles can be used to improve the delivery of many drugs, especially peptides and proteins. Although several methods are available for polymeric nanoparticle preparation, there are few single-stage processes that produce dry, solid nanoparticles that can be easily re-dispersed in pharmaceutical vehicles. The aerosol flow reactor method is a single-stage process that has been used for the preparation of multicomponent, coated nanoparticles under uniform temperature and gas flow field. However, it is traditionally used with high synthesis temperatures. In the present study, the aerosol flow reactor method was further optimized for processing and surface stabilization of pharmaceutical nanoparticles containing temperature sensitive biomolecules. In the developed method, drug-loaded carrier nanoparticles consisting of a biodegradable polymer (Eudragit L100) and a drug (phenylephrine hydrochloride) were first produced by aerosol droplet drying and subsequently coated in the gas phase. The carrier particles were coated with l-leucine in order to inhibit agglomeration of the nanoparticles in solutions before administration. In the coating process, a side stream of l-leucine vapor was directed into the main aerosol flow containing the drug-loaded carriers. The mixing with the main flow at ambient temperature induced a supersaturation of l-leucine vapor and condensation on the carrier particles. The results demonstrate that solid, hydrodynamically stable drug-loaded polymeric nanoparticles can be produced with a thin l-leucine coating. The low process temperature enables the surface engineering of particles loaded with temperature sensitive drugs or bioactive materials to be utilized for drug delivery purposes.     

Particulate emissions from large-scale medium-speed diesel engines: 1. Particle size distribution

This paper addresses particulate matter (PM) size distributions in large-scale diesel engine exhaust. The test engines were multivariable large-scale turbo-charged, after-cooled medium speed (~ 500 rpm, ~ 1 MW power per cylinder) direct injection diesel engines. Emissions measurements were carried out while burning heavy fuel (HFO) and light fuel (LFO) oils. Test modes for investigation were propulsion mode (marine) and generator mode (power plant), with load varying from 25 to 100%. PM was measured using a gravimetric impactor with four impactor stages plus a filter, classifying particles between 0.005 and 2.5 μm (aerodynamic diameter). The results show that HFO firing produces significantly higher PM emissions (more than factor of ~three on mass bases for high load operation) compared to LFO, especially for particles smaller than 0.5 μm. This is mainly due to higher ash-forming elements and sulphur content of HFO. For HFO, the fraction of the finest particles increases with load, more strongly for generator mode than for propulsion mode, with generator mode giving ~ 50% higher PM emissions than propulsion mode. With LFO firing, the largest amount of fine PM was emitted at the lowest load, for propulsion mode being lower and almost independent of load at higher loads, while for generator mode a steady decrease in emissions with increasing load is seen for all PM size classes measured.