Crystallization kinetics of low‐density polyethylene and polypropylene melt‐blended with a low‐Tg tin‐based phosphate glass

The nonisothermal and isothermal crystallizations of low‐density polyethylene (LDPE) and polypropylene (PP) in phosphate glass (Pglass)–polymer hybrid blends were studied through differential scanning calorimetry (DSC). As the Pglass volume fraction was increased, the percentage crystallinity decreased. The half‐time for crystallization decreased as the propagation rate constant rose, for both of the polymer matrices, with increasing Pglass concentrations. The Pglass was observed to be a nucleating agent for formation of two‐ or three‐dimensional spherulites in the hybrids. Tensile modulus improved for both of the Pglass–polymer hybrids up to 40% Pglass, but the energy to break decreased. Tensile strength changed slightly with the addition of Pglass to the LDPE matrix, exhibiting a larger value than that of pure LDPE at 30%. The tensile strength decreased as more Pglass was added to the PP matrix. The observed differences between tensile properties of the Pglass–PP and Pglass–LDPE hybrids at identical Pglass volume concentration were found to be consistent with that of the crystallization behavior of the hybrids. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3445–3456, 2003     

Effect of ionic content,solid content,degree of neutralization,and chain extension on aqueous polyurethane dispersions prepared by prepolymer method

There are many variables in the preparation of aqueous polyurethane (PU) dispersions. Carboxylic acid content, solid content, degree of pre/postneutralization of the carboxylic acids, and chain extension all impact dispersion particle size, viscosity, pH, molecular weights, and glass transition temperature. This study evaluated the impact of these variables on a given PU dispersion formulation prepared from isophorone diisocyanate, an aliphatic polyester polyol, dimethylol propionic acid, and hexamethylene diamine with triethyl amine as the neutralizing base and N‐methyl pyrrolidone as the cosolvent. Changes in carboxylic acid content, degree of preneutralization, and chain extension were found to have the expected impacts on dispersions properties. Increased ionic content in the dispersion step led to lower particle size and higher viscosity, increased chain extension with its concurrent increase in molecular improved subsequent film properties. Surprising results were obtained by varying the amount of postneutralization and from increased solids content at the time of dispersion. Unexpectedly, both of these variations led to much higher dispersion viscosities and particle size in solution. To have these changes take place, it is theorized that there is a major change in solution morphology caused by these modifications. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2514–2520, 2005     

Modelling the Rotary Lime Kiln

A three‐dimensional steady‐state model to predict the flow and heat transfer in a rotary lime kiln is presented. All important phenomena are considered for the pre‐heat and calcination zones including turbulent gas flow, buoyancy, all modes of heat transfer, evolution and combustion of species and granular bed motion with calcination reaction. The model is based on a global solution of three sub‐models for the hot flow, the bed and the rotating wall/refractories. Information exchange between the models results in a fully coupled 3‐D solution of a rotating lime kiln. The overall model is validated using UBC's pilot kiln trials (5.5 m laboratory kiln). Results for this case are presented and potential implications are discussed.     

Improved additive manufacturing of silicon carbide parts via pressureless electric field-assisted sintering

High solids loading silicon carbide (SiC)-based aqueous slurries containing only .5 wt. % organic additives were utilized to create specimens of various geometries via an extrusion-based additive manufacturing (AM) technique. Pressureless electric field-assisted sintering was performed to densify each specimen without deformation. The combination of these techniques produced parts with >98% relative density despite containing only 5 wt.% oxide sintering additives. After sintering, specimens contained only the α-SiC and yttrium aluminum perovskite phases. This suggests the evolution of a nonequilibrium yttrium aluminate phase, as well as transformation from β-SiC to α-SiC. The fabrication method presented in this work has advantages over other AM techniques commonly used with SiC, because it does not require significant organic additives nor additional postprocessing steps such as chemical vapor infiltration or polymer impregnation and pyrolysis.     

The Role of α1-Adrenoceptor Antagonists in the Treatment of Prostate and Other Cancers

This review evaluates the role of α-adrenoceptor antagonists as a potential treatment of prostate cancer (PCa). Cochrane, Google Scholar and Pubmed were accessed to retrieve sixty-two articles for analysis. In vitro studies demonstrate that doxazosin, prazosin and terazosin (quinazoline α-antagonists) induce apoptosis, decrease cell growth, and proliferation in PC-3, LNCaP and DU-145 cell lines. Similarly, the piperazine based naftopidil induced cell cycle arrest and death in LNCaP-E9 cell lines. In contrast, sulphonamide based tamsulosin did not exhibit these effects. In vivo data was consistent with in vitro findings as the quinazoline based α-antagonists prevented angiogenesis and decreased tumour mass in mice models of PCa. Mechanistically the cytotoxic and antitumor effects of the α-antagonists appear largely independent of α 1-blockade. The proposed targets include: VEGF, EGFR, HER2/Neu, caspase 8/3, topoisomerase 1 and other mitochondrial apoptotic inducing factors. These cytotoxic effects could not be evaluated in human studies as prospective trial data is lacking. However, retrospective studies show a decreased incidence of PCa in males exposed to α-antagonists. As human data evaluating the use of α-antagonists as treatments are lacking; well designed, prospective clinical trials are needed to conclusively demonstrate the anticancer properties of quinazoline based α-antagonists in PCa and other cancers.     

Effect of hydrogen sulphide on nitric oxide adsorption and decomposition on Cu-containing molecular sieves

NO adsorption and decomposition were studied on sulphided and sulphated copper-exchanged ZSM-5, AlMCM-41 and NbMCM-41 molecular sieves. FTIR, temperature-programmed reduction (H₂-TPR) techniques, adsorption, and catalytic measurements were applied. H₂S adsorption drastically decreases the activity of copper-containing micro- and mesoporous materials studied in NO decomposition due to their sulphidation. This decrease is higher than that observed after SO₂ treatment and is assigned to the formation of sulphide species. H₂S is strongly chemisorbed on all copper active sites. Oxidation of sulphide species leading to the formation of sulphates does not increase the activity in the decomposition of NO, suggesting that some sulphided species are not oxidised.     

Nanostructured polymer blends: Synthesis and structure

Nanostructured polymer blends prepared via anionic ring opening polymerizations of cyclic monomers in the presence of a pre-made polymer melt exhibit a number of special properties over traditional polymer blends and homopolymers. Here, we report on a simple and versatile method of in situ polymerization of macrocyclic carbonates in the presence of a maleic anhydride polypropylene (mPP) matrix and a surface-active compatibilizer (i.e. PC grafted onto a mPP backbone generated in situ) to yield a micro- and nanostructured polymer blends consisting of a polycarbonate (PC) minor phase, and a polypropylene (PP) major phase. By varying the processing conditions and concentration of the macrocyclic carbonate it was possible to reduce the size of the PC dispersions to an average minor diameter of 150 nm. NMR and TEM characterizations indicate that the PC dispersions do not influence crystal content in the PP phase. Overall, the results point to a simple strategy and versatile route to new polymeric materials with enhanced benefits.     

SCR deactivation in a full-scale cofired utility boiler

The Energy and Environmental Research Center installed a portable slipstream selective catalytic reduction (SCR) reactor in the convective pass of a utility boiler cofiring wood waste and Powder River Basin (PRB) coal. Catalyst sections were removed after 43, 128, and 171 days of operation. SCR catalytic activity was determined for each section, and a sample of one section was examined under a scanning electron microscope to look for signs of catalyst blinding and/or poisoning. The catalyst deactivated at an apparently inverse rate with an initial deactivation rate of 18% every 1000 h. The major mode of deactivation appeared to be pore blocking by combined alkali and calcium sulfate deposition and growth.     

Electronic band structure calculation and nuclear spin-lattice relaxation in chromium hydrides

The angular-momentum components of the density of states (DOS) were calculated by the FP-LAPW method for stoichiometric CrH having either hexagonal (anti-NiAs) or cubic (NaCl or ZnS) types of structure. The shape of the DOS of the metal 3d states is remarkably similar for the two models of cubic structure, and differs only slightly from that for the hexagonal structure. The DOSs have been used to calculate the ⁵³Cr nuclear spin-lattice relaxation rates. It is found that that the s and p electron contributions to the relaxation rates are negligibly small due to their very low partial densities of states at the Fermi level. The d-orbital contributions are dominant and the core-polarisation and d-dipolar contributions play a minor role. The experimental relaxation rates measured in hexagonal CrH_0.97 and CrH_0.93 and cubic CrH_0.97 indicated the presence of magnetic impurities in the samples, the contribution of which was subtracted from measured relaxation rates. It was found that the intrinsic relaxation rates are reasonably well reproduced by theoretical calculations.