Chaos-Based transmitted-reference ultra-wideband communications

Transmitted-reference (TR) ultra-wideband (UWB) communication systems have gained increasing popularity for the usage in the low data rate application, due to its non-coherent receiver structure. In conventional TR system, non-coherency at the receiver is achieved by sending reference pulses prior to the data-bearing pulses. Then, at the receiver side, reference pulses are used as template signals for correlation with data-bearing pulses. Therefore, the orthogonality between reference and data pulses is obtained in time division multiple access (TDMA) fashion. However, the implementation of a wideband delay line is very difficult in the current low power integrated circuits. In this paper, a TR method called Chaos-Based TR (CB-TR) is proposed. In the proposed method, chaotic sequences are used to separate the reference and data pulses. Such approach exploits the benefits of chaotic signals, such as non-periodicity, easy-to-generate, impulse-like autocorrelation value and low cross-correlation value. Furthermore, in order to decrease the influence of some negative properties of conventional chaotic maps, a modified chaotic generator (MCS) is proposed. Simulation results over the IEEE 802.15.4a channel model show comparable bit error rate performance to other TR methods.     

Deflections of concrete beams reinforced with FRP bars

The aim of this study is to experimentally and theoretically investigate the flexural behavior of concrete beams reinforced with fiber reinforced polymer (FRP) bars. In this research, three types of experiments were made. First, the tensile properties of FRP and steel bars were tested, then the bond-slip behavior between bars and concrete was tested on standard specimens and, in the end, three series of concrete beams reinforced with GFRP, CFRP and steel bars were tested up to failure. The theoretical model for calculating deflections was developed, which included bond-slip behavior of FRP bars. The theoretical results were compared to the test results of beam deflections, as well to deflection results obtained by theoretical models developed by other authors.     

Quantitation of steroid hormones in thin fresh frozen tissue sections

As analytical technologies in proteomics and metabolomics continue to mature, there is an increasing need to apply these to clinically relevant biologic samples. In this study, a liquid chromatography-tandem mass spectrometry method that utilizes selected reaction monitoring was used to measure the absolute quantity of estrogens and estrogen metabolites and testosterone in 8-microm tissue sections obtained from a fresh frozen lymph node tumor infiltrated by metastatic breast carcinoma. Total (conjugated plus unconjugated) and unconjugated levels of these steroid hormones were measured using two cohorts, each containing five adjacent serial sections cut from this tumor. The results were highly reproducible across replicate samples, showing that typical histological tissue sections represent an important sample type for the measurement of these specific metabolites.     

Mitochondrial DNA Fragmentation as a Molecular Tool to Monitor Thermal Processing of Plant‐Derived,Low‐Acid Foods,and Biomaterials

Cycle threshold (Ct) increase, quantifying plant‐derived DNA fragmentation, was evaluated for its utility as a time‐temperature integrator. This novel approach to monitoring thermal processing of fresh, plant‐based foods represents a paradigm shift. Instead of using quantitative polymerase chain reaction (qPCR) to detect pathogens, identify adulterants, or authenticate ingredients, this rapid technique was used to quantify the fragmentation of an intrinsic plant mitochondrial DNA (mtDNA) gene over time‐temperature treatments. Universal primers were developed which amplified a mitochondrial gene common to plants (atp1). These consensus primers produced a robust qPCR signal in 10 vegetables, 6 fruits, 3 types of nuts, and a biofuel precursor. Using sweet potato (Ipomoea batatas) puree as a model low‐acid product and simple linear regression, Ct value was highly correlated to time‐temperature treatment (R² = 0.87); the logarithmic reduction (log CFU/mL) of the spore‐forming Clostridium botulinum surrogate, Geobacillus stearothermophilus (R² = 0.87); and cumulative F‐value (min) in a canned retort process (R² = 0.88), all comparisons conducted at 121 °C. D₁₂₁ and z‐values were determined for G. stearothermophilus ATCC 7953 and were 2.71 min and 11.0 °C, respectively. D₁₂₁ and z‐values for a 174‐bp universal plant amplicon were 11.3 min and 9.17 °C, respectively, for mtDNA from sweet potato puree. We present these data as proof‐of‐concept for a molecular tool that can be used as a rapid, presumptive method for monitoring thermal processing in low‐acid plant products.     

Thermophysical and Dielectric Properties of Salsa Con Queso and its Vegetable Ingredients at Sterilization Temperatures

Aseptic processing of a low-acid multiphase food product using continuous flow microwave heating system can combine the advantages of an aseptic process along with those of microwave heating. The objective of this study was to determine the thermophysical and dielectric properties of salsa con queso and its vegetable ingredients (tomatoes, bell peppers, jalapeno peppers, and onions) at a temperature range of 20 to 130°C to design a safe process for aseptic processing of salsa con queso using a continuous flow microwave system. The influence of temperature on apparent viscosity of salsa con queso was described by an Arrhenius-type relationship. Second order polynomial correlations for the dependence of thermophysical and dielectric properties (at 915 MHz) of salsa con queso and its vegetable ingredients on temperature were developed. The results showed that the dielectric constant decreased with an increase in temperature and the dielectric loss factor increased with an increase in temperature.     

Improved structured light 3D scanner with application to anthropometric parameter estimation

Obtaining accurate anthropometric body segment parameters in a fast and reliable manner is an essential step in biomechanical analysis of human motion. With advance of computer vision, and reduction in cost of electronic components, building a customized computer-vision based measurement device becomes possible. In the paper a novel structured light pattern for 3D structured light scanner is proposed. During development, accuracy and robustness of the proposed system were tested on artificial objects with known surface configurations, after which measurements were performed on human subjects. Simultaneous measurements with standard structured light pattern were achieved and obtained results compared. Volumetric parameters of both artificial object and human body segment obtained by 3D scanning were compared to the immersion method and were found to be in a good agreement and were used for segment mass estimation. Obtained results are presented and analyzed, and conclusions about system performance with possible improvements are discussed.     

Behavior of AISI 316L Steel Subjected to Uniaxial State of Stress at Elevated Temperatures

This paper presents an experimental investigation on an AISI 316L stainless steel regarding mechanical properties and short uniaxial creep tests at elevated temperatures. The short time creep tests were carried out under different but constant stresses. The obtained data of ultimate tensile strength, yield strength, creep curves and effects of elevated temperatures on mechanical properties were presented. For a selected rheological model,material parameters were obtained. As a justification, such rheological model is implemented in the finite element procedure for an uniaxially stressed specimen in selected environmental conditions.     

OPTIMAL DESIGN PROCEDURE BASED ON VISCOPLASTIC MATERIAL BEHAVIOUR

1.IntroductionSafety,functionality,protectionofenvironmentandlowpricemaybenumberedasmayorreasonsformakingofanoptimalproduct.Ontheotherhandoptimalproductmaybedonebyconcurrentlyutilizingalloftherelevantinformation,methods,computerperformances,manufacturingpossibilitiesandofcourseknowledgepotential.Themaintaskoftheoptimalprocedureinthedesignprocessaswellasinthemanufac-turingprocessistofindthebestcombinationbetweentheobjectivefunctionandconstrains.Theobtainedproductwillbeoptimalasthemathematicalid…