Utility of an image-based canopy reflectance modeling tool for remote estimation of LAI and leaf chlorophyll content at the field scale

This paper presents a physically-based approach for estimating critical variables describing land surface vegetation canopies, relying on remotely sensed data that can be acquired from operational satellite sensors. The REGularized canopy reFLECtance (REGFLEC) modeling tool couples leaf optics (PROSPECT), canopy reflectance (ACRM), and atmospheric radiative transfer (6SV1) model components, facilitating the direct use of at-sensor radiances in green, red and near-infrared wavelengths for the inverse retrieval of leaf chlorophyll content (C_ab) and total one-sided leaf area per unit ground area (LAI). The inversion of the canopy reflectance model is constrained by assuming limited variability of leaf structure, vegetation clumping, and leaf inclination angle within a given crop field and by exploiting the added radiometric information content of pixels belonging to the same field. A look-up-table with a suite of pre-computed spectral reflectance relationships, each a function of canopy characteristics, soil background effects and external conditions, is accessed for fast pixel-wise biophysical parameter retrievals. Using 1 m resolution aircraft and 10 m resolution SPOT-5 imagery, REGFLEC effectuated robust biophysical parameter retrievals for a corn field characterized by a wide range in leaf chlorophyll levels and intermixed green and senescent leaf material. Validation against in-situ observations yielded relative root-mean-square deviations (RMSD) on the order of 10% for the 1 m resolution LAI (RMSD = 0.25) and C_ab (RMSD = 4.4 μg cm^− 2) estimates, due in part to an efficient correction for background influences. LAI and C_ab retrieval accuracies at the SPOT 10 m resolution were characterized by relative RMSDs of 13% (0.3) and 17% (7.1 μg cm^− 2), respectively, and the overall intra-field pattern in LAI and C_ab was well established at this resolution. The developed method has utility in agricultural fields characterized by widely varying distributions of model variables and holds promise as a valuable operational tool for precision crop management. Work is currently in progress to extend REGFLEC to regional scales.     

Towards Focused Plan Monitoring: A Technique and an Application to Mobile Robots

Until recently, techniques for AI plan generation relied on highly restrictive assumptions that were almost always violated in real-world environments; consequently, robot designers adopted reactive architectures and avoided AI planning techniques. Some recent research efforts have focused on obviating such assumptions by developing techniques that enable the generation and execution of plans in dynamic, uncertain environments. In this paper, we discuss one such technique, rationale-based monitoring, originally introduced by Veloso, Pollack, and Cox (Proceedings for the Fourth International Conference on AI Planning Systems, Pittsburgh, PA, 1998, pp. 171–179) and we describe our use of it in a simple mobile robot environment. We review the original approach, describe how it can be adapted for a causal-link planner, and provide experimental results demonstrating that it can lead to improved plans without consuming excessive overhead. We also describe our use of rationale-based monitoring in a mobile robot office-assistant project currently in progress.     

Ecclesiastes effects

The reward system in science involves several psychosocial processes that can be named after books in theBible: Merton proposed the Matthew Effect andTurner andChubin offered the Ecclesiastes Hypothesis, based on relevant biblical passages. This article identifies several other bibliometric phenomena described inEcclesiastes, including an explanation of why there is a multiplication of specializations in disciplines with growing literatures.     

Using Similarity Analyses to Scale Out Research Findings Across Andean Watershed Basins

Abstract

Strategic research in agriculture and natural resources carried out by international research centers is deemed a public good and should, sooner or later, be put into the hands of development, governmental and non-governmental organizations. However, this research is usually done at specific pilot sites; there is a greater need to know how representative those sites are in relation to the diversity of contexts in other locations. Such is the case with the Challenge Program on Water and Food (CPWF), a global initiative in water research promoted by the Consultative Group on International Agricultural Research (CGIAR), which is developing and implementing strategic research in nine basins located in the tropics of Africa, Asia and South America. Given that resources are not available to collect data from the whole of the region, pilot sites are needed. It is hoped that research outputs obtained in the selected pilot sites can be the basis for scaling out solutions to similar situations in neighbouring or adjacent areas in same or different basins.

In order to contribute to the scaling-out process, different classification methodologies were applied to determine how specific watershed basins are representative of larger areas. The Andean eco-region served as a case study but the methods can easily be applied in other regions. The spatial diversity of biophysical and social conditions across the Andes requires careful site selection. Two methods, a combination of Weight of Evidence (WofE) and Logistic Regression (LR) methods and Fast Cluster analysis, were used to determine the similarity of selected sites with those excluded. A 1-km study resolution covering most of the Andes eco-region included annual rainfall, elevation, length of growing period, land cover, roads and population density as the key variables. Results showed complementarities between the two methods in presenting a probability surface of similarity across the Andes and a clustering of similar sites inside and outside the pilot basins. The output information forms a strong basis for devising plans to scale out research findings from the pilot basins to the whole region.     

Schnelle Bestimmung von Furfurol und Hydroxymethylfurfurol in alkoholischen Getr?nken mit Hilfe der Umkehrphasen-Chromatographie

Zusammenfassung Furfurol und Hydroxymethylfurfurol können leicht mit Hilfe der Umkehrphasen-Chromatographie in Alkoholika bestimmt werden. Eine Probenvorbereitung ist nicht notwendig. Die beiden Aldehyde werden UV-spektrometrisch erfaßt, die absolute Nachweisgrenze bei Routinearbeiten beträgt 4–7 mg/100 l reinen Alkohol (entsprechend 0,01–0,03 mg/l im Getränk) und kann für Spurenbestimmungen auf 0,002–0,001 mg/l durch Injektion von größeren Probenvolumen erniedrigt werden. Die Peakhöhen der beiden Furfuroie sind im Bereich von 0,25–3 mg/l Getränk linear von der Konzentration abhängig. Die Gesamtanalyse dauert etwa 12 min. Mit der beschriebenen Methode werden brasilianischer Zukkerrohrschnaps (Cachaça) Bowie eine Reihe in Deutschland käuflicher Alkoholika untersucht.

---

Rapid determination of furfural and hydroxymethylfurfural in alcoholic beverages by reverse-phase-chromatographyComparative investigations on the content of furfurals in Brazilian Cachaça and other alcoholic liquors

Summary Furfural and Hydroxymethylfurfural can easily be determined in alcoholic beverages by means of reverse phase chromatography. A special sample preparation is not necessary. The aldehydes are detected by UV-spectrometry, the absolute detection limit in routine work is 4–7 mg/100 liters of pure ethanol (corresponding to 0.016–0.03 mg/l beverage) and can be extended down to 0.002–0.001 mg/l when injecting higher volumes for trace analysis. In the range of 0.25–3 mg/l linear relationship is obtained between peak hight and concentration. The complete assay procedure takes about 12 min. A series of Brazilian Cachaça samples and German commercial liquors were investigated with the here described method.

---

Sumário Os autores apresentam um método de determinação de Furfural e Hidroxi-metilfurfural em cachaça e outras bebidas alcoolicas, Cromatografia em alta pressão com colunas de fase reversa (C₈; 5 m; 250 × 4 mm; CH₃CN/H₂O 5/95 como eluente) permite a separação e determinaçã sem pre-tratamento das amostras em 10–12 minutos. A sensibilidade da determinação em UV (254 nm) è 4–7 mg/100 L álcool puro (0.01–0.03 mg/L na bebida respectivamente). Usando um volume maior de injecção, o limite se pode abaixar até 0.002–0.001 mg/L bebida. A altura dos picos é proporçional à concentração entre 0.25–3 mg/L bebida. As cachaças investigadas possuem geralmente um conteúdo de Furfural e de Hidroxi-metilfurfural menor do que suposto e determinato pelo método de anilina recomendado pelo governo (determinação não específica).

     

Characterization and Technological Properties of Lactic Acid Bacteria Isolated from Traditional Argentinean Goat’s Milk Products

A total of 286 lactic acid bacteria isolated from goat’s dairy products in northwest of Argentina were characterized. Lactobacilli (38%) and cocci (62%) were identified according to morphological, physiological, and relevant technological properties. L. plantarum (14%) and Enterococcus (34%) were the predominant species. S. thermophilus, Pediococcus and L. plantarum were the highest acid producers. Eight strains of L. fermentum produced bacteriocins or metabolites similar to bacteriocins. The API-ZYM test was applied to 39 isolates. Eight strains were selected from their both technological properties and enzymatic activities for use as starter or adjunct culture in the manufacture of artisanal goat cheeses.     

α-Alumina and spinel react into single-phase high-alumina spinel in <3 seconds during flash sintering

In situ X-ray diffraction measurements at the Advanced Photon Source show that α-Al₂O₃ and MgAl₂O₄ react nearly instantaneously and completely, and nearly completely to form single-phase high-alumina spinel during voltage-to-current type of flash sintering experiments. The initial sample was constituted from powders of α-Al₂O₃, MgAl₂O₄ spinel, and cubic 8 mol% Y₂O₃-stabilized ZrO₂ (8YSZ) mixed in equal volume fractions, the spinel to alumina molar ratio being 1:1.5. Specimen temperature was measured by thermal expansion of the platinum standard. These measurements correlated well with a black-body radiation model, using appropriate values for the emissivity of the constituents. Temperatures of 1600-1736°C were reached during the flash, which promoted the formation of alumina-rich spinel. In a second set of experiments, the flash was induced in a current-rate method where the current flowing through the specimen is controlled and increased at a constant rate. In these experiments, we observed the formation of two different compositions of spinel, MgO•3Al₂O₃ and MgO•1.5Al₂O₃, which evolved into a single composition of MgO•2.5Al₂O₃ as the current continued to increase. In summary, flash sintering is an expedient way to create single-phase, alumina-rich spinel.     

Aktuelle Aktivitäten zu den europäischen Rohstoff-Initiativen

The European Initiatives manifested in the Communications of the European Commission on Raw Materials, in the Strategic Implementation Plan of the European Innovation Partnership on Raw Materials and in the 2014 Call of the European Institute for Innovation & Technology (EIT) for a Knowledge and Innovation Community (KIC) on Raw Materials lead to manifold Austrian activities on Government level and on level of the Montanuniversitaet Leoben. The ESEE Region, thus East- and Southeast Europe has a special role.     

Increased HDL Size and Enhanced Apo A-I Catabolic Rates Are Associated With Doxorubicin-Induced Proteinuria in New Zealand White Rabbits

The catabolism and structure of high‐density lipoproteins (HDL) may be the determining factor of their atheroprotective properties. To better understand the role of the kidney in HDL catabolism, here we characterized HDL subclasses and the catabolic rates of apo A‐I in a rabbit model of proteinuria. Proteinuria was induced by intravenous administration of doxorubicin in New Zealand white rabbits (n = 10). HDL size and HDL subclass lipids were assessed by electrophoresis of the isolated lipoproteins. The catabolic rate of HDL‐apo A‐I was evaluated by exogenous radiolabelling with iodine‐131. Doxorubicin induced significant proteinuria after 4 weeks (4.47 ± 0.55 vs. 0.30 ± 0.02 g/L of protein in urine, P < 0.001) associated with increased uremia, creatininemia, and cardiotoxicity. Large HDL2b augmented significantly during proteinuria, whereas small HDL3b and HDL3c decreased compared to basal conditions. HDL2b, HDL2a, and HDL3a subclasses were enriched with triacylglycerols in proteinuric animals as determined by the triacylglycerol‐to‐phospholipid ratio; the cholesterol content in HDL subclasses remained unchanged. The fractional catabolic rate (FCR) of [¹³¹I]‐apo A‐I in the proteinuric rabbits was faster (FCR = 0.036 h^?1) compared to control rabbits group (FCR = 0.026 h^?1, P < 0.05). Apo E increased and apo A‐I decreased in HDL, whereas PON‐1 activity increased in proteinuric rabbits. Proteinuria was associated with an increased number of large HDL2b particles and a decreased number of small HDL3b and 3c. Proteinuria was also connected to an alteration in HDL subclass lipids, apolipoprotein content of HDL, high paraoxonase‐1 activity, and a rise in the fractional catabolic rate of the [¹³¹I]‐apo A‐I.