Impact of Spatially Heterogeneous Trop-2 Expression on Prognosis in Oral Squamous Cell Carcinoma

Oral cancer often presents with aggressive behavior and a high risk of recurrence and metastasis. For oral squamous cell carcinoma (OSCC), which is the most frequent histological subtype, therapy strategies include surgery, radiation therapy, chemotherapy, immune checkpoint inhibitors, and EGFR inhibitors. Recently, a Trop-2 antibody-drug conjugate (ADC) has been approved in the United States of America for the treatment of advanced triple-negative breast cancer. However, this ADC has also been tested in other solid tumors including head & neck squamous cell carcinoma. The prognostic impact of Trop-2 has already been reported for several cancers. We studied the prognostic influence of Trop-2 protein expression on OSCC patients’ survival. The cohort comprised n = 229 OSCC patients with available archived tumor tissue and corresponding non-neoplastic oral mucosa tissue. Using immunohistochemistry, we investigated Trop-2 expression in both the central and peripheral regions of each tumor and in corresponding non-neoplastic oral mucosa. In patients suffering from OSCC with combined high central and low peripheral Trop-2 expression, five-year overall survival (OS) was 41.2%, whereas 55.6% of OSCC patients who presented lower central and/or higher peripheral tumoral Trop-2 expression were alive after five years (p = 0.075). In multivariate Cox regression, the expression pattern of high central tumoral and lower peripheral Trop-2 expression was significantly correlated with impaired OS (HR = 1.802, 95%-CI: 1.134–2.864; p = 0.013) and recurrence-free survival (RFS) (HR = 1.633, 95%-CI: 1.042–2.560; p = 0.033), respectively, when adjusting for co-variables. Hence, Trop-2 may serve as an independent prognostic biomarker in OSCC. In subsequent studies, the pathophysiological meaning of downregulated Trop-2 expression in the OSCC periphery has to be analyzed.     

Acoustic emission behavior of epoxies during tensile loading

The acoustic emission behavior during tensile loading of two common epoxy systems of different ductility was investigated at different loading rates. At low threshold voltage, it was possible to register acoustic emissions before the final failure. Only very few emissions were recorded compared with the amount commonly recorded for metals and composite materials. The acoustic emissions detected were of burst-type, revealing a brittle damage accumulation process. They originated from the initiation and incremental growth of microcracks of stochastic nature. The events occurred before gross yielding and during the final “brittle” failure process. Basically no events were detected between gross yielding and the final failure during which large scale yielding, necking, and stable crack growth took place. The occurrence of events at the different loading rates was strongly influenced by the yielding behavior and fracture toughness, characterized by the yield stress σ_y and the plane-strain fracture toughness K_Ic respectively. K_Ic was inversely dependent on the total number of events up to gross yielding. The event distribution normalized with respect to the conditions at gross yielding was hardly affected by the loading rate.     

Effects of Alkaline-Earth-Metal Addition on the Sinterability and Microwave Characteristics of (Zr,Sn)TiO4 Dielectrics

The sinterability and microwave dielectric properties of (Zr_0.8Sn_0.2)TiO₄ with additions of 1 mol% of magnesium, calcium, strontium, or barium were examined. All the alkaline-earth metals were effective for densification, and the order of effectiveness was as follows: Mg < Ca < Sr < Ba. The dielectric constant and the temperature coefficient of the resonant frequency were not influenced very much by the additives; however, a strong deterioration of the quality factor ( Q ) did occur when magnesium was added. The presence of grain-boundary phases was confirmed via microstructural observation, using transmission electron microscopy. In addition, energy-dispersive X-ray analysis was performed to investigate the cause of the deterioration in the Q value.     

Sintering Behavior of Nanocrystalline Zirconia Doped with Alumina Prepared by Chemical Vapor Synthesis

Powders of nanocrystalline zirconia doped with 3–30 mol% alumina have been synthesized using chemical vapor synthesis (CVS). Dense or mesoporous ceramics of small and narrowly distributed grain and pore sizes in the nanometer range are obtained via pressureless vacuum sintering. The microstructural development of the doped samples is strongly dependent on the alumina content. Sintering of zirconia samples with 3 and 5 mol% alumina at temperatures of 1000°C for 1 h results in fully dense, transparent ceramics with grain sizes of 40–45 nm and homogeneous microstructures.     

Effects of a Conducting LaNiO3 Thick Film as a Buffer Layer of a Pb(Zr,Ti)O3 Film on Titanium Substrates

A conducting 8-μm-thick LaNiO₃ (LNO) film was deposited on a Ti substrate by aerosol deposition for use as a diffusion barrier between a lead zirconate titanate (PZT) and a Ti substrate during postannealing. The deposited 20-μm-thick PZT films were annealed at 800°C. The PZT film deposited without LNO was cracked and partially detached from the substrate after postannealing, presumably due to a severe reaction with the Ti substrate, while no significant reactions were observed when the LNO buffer layer was used. The remnant polarization and relative dielectric constant of the 20-μm-thick annealed PZT films deposited on the LNO-buffered Ti substrate were 43 μC/cm² and 1010, respectively.     

Growth and formation mechanism of sea urchin-like ZnO nanostructures on Si

Sea urchin-like nanostructures of ZnO consisting of ZnO nanowires with blunt faceted ends were grown on Si (100) substrates by oxidation of metallic Zn at 600 °C. ZnO nanowires having a diameter of 30–60 nm and length of 2–4 Μm were in similar shape with uniform diameter along its entire length with well faceted blunt ends. X-ray diffraction and transmission electron microscope analysis showed that the as-grown nanostructures were highly crystalline with wurtzite hexagonal structure having lattice constants of a=b=3.25 å and c=5.21 å. Room temperature photoluminescence (PL) measurements showed a weak near band-edge emission at 380 nm, but a strong green emission at 500–530 nm. A model for vapor-solid (VS) growth mechanism of ZnO nanowires was presented, in which nucleation of ZnO is crucial for the growth of the nanostructures.     

UBET analysis of the closed-pass ring rolling of rings having arbitrarily shaped profiles

A simple but effective upper-bound elemental technique (UBET) for prediction of the torque and the deformation pattern during the ring-rolling of rings having arbitrarily shaped profiles is proposed. In order to describe the three-dimensional material flow of profile ring rolling, a new element with a curvilinear side is introduced and the corresponding kinematically admissible velocity field is derived. Upper-bound analysis is carried out for rolling rings with a circular groove or protrusion having a round corner fillet. Comparing with the experimental results, the roll torque and the profile formation are predicted with reasonable accuracy. The effects of some parameters are investigated also. Despite the simplifying assumptions, some aspects of the deformation mechanics in profile ring rolling are shown to be described successfully by the proposed method.     

Influences of Ta, Nb, or Mo additions in Zr-based bulk metallic glasses on microstructure and thermal properties

The master-alloy ingots for casting bulk metallic glasses are routinely prepared by arc melting a mixture of pure elements. This paper addresses the difficulty in achieving complete and homogeneous melting of refractory component additions in Zr-based BMGs using the above procedure, and its influences on the microstructure and thermal behavior of alloys.     

In Vivo Analysis of the Biocompatibility and Bone Healing Capacity of a Novel Bone Grafting Material Combined with Hyaluronic Acid

The present in vivo study analyses both the inflammatory tissue reactions and the bone healing capacity of a newly developed bone substitute material (BSM) based on xenogeneic bone substitute granules combined with hyaluronate (HY) as a water-binding molecule. The results of the hyaluronate containing bone substitute material (BSM) were compared to a control xenogeneic BSM of the same chemical composition and a sham operation group up to 16 weeks post implantationem. A major focus of the study was to analyze the residual hyaluronate and its effects on the material-dependent healing behavior and the inflammatory tissue responses. The study included 63 male Wistar rats using the calvaria implantation model for 2, 8, and 16 weeks post implantationem. Established and Good Laboratory Practice (GLP)-conforming histological, histopathological, and histomorphometrical analysis methods were conducted. The results showed that the new hyaluronate containing BSM was gradually integrated within newly formed bone up to the end of the study that ended in a condition of complete bone defect healing. Thereby, no differences to the healing capacity of the control BSM were found. However, the bone formation in both groups was continuously significantly higher compared to the sham operation group. Additionally, no differences in the (inflammatory) tissue response that was analyzed via qualitative and (semi-) quantitative methods were found. Interestingly, no differences were found between the numbers of pro- and anti-inflammatory macrophages between the three study groups over the entire course of the study. No signs of the HY as a water-binding part of the BSM were histologically detectable at any of the study time points, altogether the results of the present study show that HY allows for an optimal material-associated bone tissue healing comparable to the control xenogeneic BSM. The added HY seems to be degraded within a very short time period of less than 2 weeks so that the remaining BSM granules allow for a gradual osteoconductive bone regeneration. Additionally, no differences between the inflammatory tissue reactions in both material groups and the sham operation group were found. Thus, the new hyaluronate containing xenogeneic BSM and also the control BSM have been shown to be fully biocompatible without any differences regarding bone regeneration.