Fatigue,residual strength and non-destructive tests of an aging aircraft’s wing detail

This study concentrates on fatigue, residual strength and non-destructive tests of an aging aircraft’s wing detail of the Finnish Air Force’s Hawk Mk.51 jet trainer. The studied detail was the integral stiffener with a drain hole near the wing root. Fatigue tests were deemed necessary to verify experimentally the analytically observed short fatigue life, significant crack growth rates and eventually to re-assess the detail’s inspection period for the fleet jets. The results of the study have been utilized e.g. at the complementary type approval accomplished for the Finnish Air Force’s Hawk.     

Steady-state modelling of extrusion cooking employing response surface methodology

Extrusion cooking has been approached from the point of view of continuous screw reactor technology, applying a heuristic hypothesis to changes in biopolymer aggregate states. Engineering design variables, the nature of basic biopolymer reactions, mass-machine interactions, and problems in the modelling of product quality in extrusion cooking are discussed. Response surface methodology (RSM) and its applications are discussed in detail including its significance and limitations in the study of complicated experimental situations.     

On commutative DT0L systems

Restricted versions of DT0L systems, so-called commutative DT0L systems, are considered. In these systems the length of a word derived is independent of the order of tables used. It turns out that many interesting length sets or languages, such as the set of composite numbers, are generated by these systems. Moreover, this approach makes it possible to give new (and slightly generalized) proofs for some undecidability results concerning DT0L functions.     

Preliminary study of lake dissolved organic matter in light of nanoscale supramolecular assembly

Large-scale preparative high-performance size-exclusion chromatography (HPSEC) was performed to separate different molecular size fractions in milligram quantities from strongly colored dissolved organic matter (DOM) of a freshwater using a very mild conjugate acid-base pair (10 mM acetic acid-sodium acetate solution at pH 7.0 with an ionic strength of 6 x 10(-5)) as the mobile phase. The homogeneity-uniformity of different molecular size fractions in relation to their combined original mixture was verified by an analytical HPSEC system. In addition to molecular size distribution and basic spectroscopic characteristics, Fourier transform infrared spectroscopy was applied to specify structural features for different size fractions. The results demonstrate clearly that only a very small amount of conjugate organic acid-base pair is required to generate a powerful resolution for a DOM mixture, and very strong treatments with organic acids are not necessarily needed to reach a better SEC resolution. Most essential is the combined outcome of different HPSEC experiments and determined structural functionalities which indicate that almost all original DOM solutes are aggregated mixtures consisting of different associations possessing various molecular size ranges, which can be separated from their integrated whole as nearly homogeneous and uniform species. In summary, the present study strongly speaks for the need to direct the research of natural dissolved and colloidal organic carbon more strongly toward a nanoscale study of supramolecular assemblies. More precise knowledge about the primary, secondary, and tertiary structure of dissolved DOM constituents has its essential function, e.g., for environmental protection and utilization of surface waters.     

Combined blowing with three ‐ hole lance in a sidewall blowing converter

Traditionally, in stainless steelmaking converters, oxygen has been blown by a one‐hole lance (1 HL) and sidewall tuyères. In order to reduce the tap‐to‐tap time, the multi‐hole lance has been used for oxygen blowing. The aim of this work was to develop blowing practise for a multi‐hole lance to reduce the tap‐to‐tap time and minimise metal splashing and spitting in the sidewall blowing converter (chromium converter). In the chromium converter the chemical energy of liquid ferrochrome (which contains 4 % silicon and 7 % carbon) is utilised for scrap melting by oxidising the silicon and the part of carbon. The research has been made by a dynamically scaled water model and full‐scale converter. Used parameters were the gas flowrate from sidewall tuyères and lance, lance height, charge weight and position of multi‐hole lance. Splashing has been measured during blowing from walls (splashing) and mouth of the converter model (spitting). The model tests indicated less splashing and spitting by the three‐hole lance (3 HL) than traditional 1 HL. The 1 HL caused strong skulling of the converter cone. By 3 HL blowing the position of the lance has a remarkable effect on the direction and the amount of splashing and lance life. Because of hot metal‐slag splashes, the life time of the 3 HL was halved by position 1 (compared to 1 HL). With the lance position 2 the splashing decreased by approx. 50% in model tests and lance life time increased by ~ 50% (compared to 1 HL) in the full‐scale converter. The model agreed well with the full‐scale converter. According to the process tests, the nominal productivity of the chromium converter has increased 15 % and depending on the refining practise and the silicon content of ferrochromium the lining life has increased 20 ‐ 30 %. In the future the multi‐hole lance will be tested in the AOD vessel.     

Effect of Oat Bran Fractions on Extrudates Made of Defatted Oats

Food and Bioprocess Technology - Oats are rich in dietary fibre (DF) especially in β-glucan which has several health-promoting effects. Oats are not commonly used in extruded snacks because...     

Ambipolar field effect in the ternary topological insulator (Bi(x)Sb(1-x))2Te3 by composition tuning

Topological insulators exhibit a bulk energy gap and spin-polarized surface states that lead to unique electronic properties, with potential applications in spintronics and quantum information processing. However, transport measurements have typically been dominated by residual bulk charge carriers originating from crystal defects or environmental doping, and these mask the contribution of surface carriers to charge transport in these materials. Controlling bulk carriers in current topological insulator materials, such as the binary sesquichalcogenides Bi2Te3, Sb2Te3 and Bi2Se3, has been explored extensively by means of material doping and electrical gating, but limited progress has been made to achieve nanostructures with low bulk conductivity for electronic device applications. Here we demonstrate that the ternary sesquichalcogenide (Bi(x)Sb(1-x))2Te3 is a tunable topological insulator system. By tuning the ratio of bismuth to antimony, we are able to reduce the bulk carrier density by over two orders of magnitude, while maintaining the topological insulator properties. As a result, we observe a clear ambipolar gating effect in (Bi(x)Sb(1-x))2Te3 nanoplate field-effect transistor devices, similar to that observed in graphene field-effect transistor devices. The manipulation of carrier type and density in topological insulator nanostructures demonstrated here paves the way for the implementation of topological insulators in nanoelectronics and spintronics.     

Cost modelling in underpinning projects

Large refurbishment projects are characterized by highly varied costs from one project to another. In Finnish underpinning, only retrospective analysis of costs has been available for the owner’s decision process. In order to develop tools for pre‐tender cost estimating and for comparison of different design solutions and evaluation of tenders of the underpinning project, two different cost models have been developed for research. In both models developed, the minimum data required is the pile length. In the more detailed model, the assessment is based on the design solution, including known pile types and the load transfer classification. Both models are easy to use, and the percentage of explained variance is fairly good in the more detailed model.