A portable device for intensive care brain function monitoring with event-related potentials

Monitoring level of consciousness or depth of sedation is essential in modern intensive care units and emergency rooms. Current methods are based on spontaneous EEG providing only indirect information on the reactivity of the brain. Measurement of auditory event-related potentials (ERPs) has been shown to have additional potential for evaluation of the level of consciousness. Unfortunately, compact and easy-to-use devices are not commercially available. In this study a portable battery-powered device for clinical auditory ERP measurements was designed, constructed and validated. The device consists of a five-channel data logger and a 16-bit stereo audio stimulator. The signals are digitized with a 22-bit sigma-delta analogue-to-digital converter and stored to a PC Card hard disk. Prior to the in vivo application, the device was validated with extensive technical tests. Importantly, the RMS noise amplitude of the EEG channels was found to be less than 1 mivroV and the delivered auditory stimulus intensity corresponded accurately the settings (mean difference 0.2+/-0.5 dB). In addition to technical tests the device was successfully validated in vivo. To summarize, a novel portable instrument for measurement of auditory event-related potentials in intensive care environment is introduced.     

Metallocene‐based functionalized polyolefins as compatibilizers in polyolefin nanocomposites

This article reports a study of some functionalized polyolefins evaluated as compatibilizers in polyethylene nanocomposites. The functionalized polymers were prepared by direct metallocene‐mediated copolymerizations of ethylene and a functional comonomer. The prepared nanocomposites were evaluated for mechanical and barrier property enhancement. A good combination of mechanical and barrier properties was obtained with the metallocene‐based functionalized polyethylene. The toughness–stiffness balance was better than or comparable to that achieved with conventional functionalized polymers such as maleic anhydride grafted polyethylene. The results also indicated that these metallocene‐based functionalized polyolefins, when used as compatibilizers, could have relatively higher molar masses and lower functionality than those of conventional post‐reactor‐modified compatibilizers, and so the drawbacks associated with the latter could be avoided. Their inherent properties could also further improve the final nanocomposite properties. This was attributed to the more homogeneous nature of metallocene‐catalyzed polymers in comparison with post‐reactor‐modified products. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1094–1100, 2004     

Removal of bis(2-ethylhexyl) phthalate at a sewage treatment plant

Bis(2-ethylhexyl) phthalate (DEHP) concentrations were measured at different stages in a full-scale sewage treatment plant (STP) and mass balances were calculated. The DEHP load to treatment process coming from the sewer system and the internal load comprising returned supernatants and filtrate from sludge treatment and excess secondary sludge were at the same level. The DEHP removal efficiency from the water phase at the STP was on average 94% of sewage DEHP, the main removal process being sorption to primary and secondary sludges. On average 29% of DEHP was calculated to be removed in the biological nitrifying-denitrifying activated sludge process, which was much less than expected from laboratory biodegradation studies described in literature. Monoethylhexyl phthalate, the primary biotransformation product of DEHP, was not detected at any treatment stage. Approximately 32% of DEHP in sewage was removed during anaerobic digestion of the sludge, while 32% remained in the digested and dewatered sludge.     

Identity and overall acceptance of two types of sour rye bread

Response surface methodology was employed to study the influence of four recipe variables (wheat: rye flour ratio, bread acidity, ash content of rye flour and sodium chloride content) on the identity and overall acceptance of two rye bread types (soft and crisp rye bread). The subjects ( n = 79) rated attribute intensities, the extent to which the salient sensory properties and the overall sample corresponded to their expectations of rye bread, and the overall acceptance (pleasantness and purchase intentions). The acidity and ash content contributed the most to the extent to which a sample met subjects' expectations. The NaCl content was not critical. Consumer acceptance was affected by ash content, and by the interactions, NaCl content × acidity and wheat:rye ratio × ash content. The non-significance of NaCl content should encourage the baking industry to put low-salt rye products on the market.     

Computerized product process: Measurement and continuous improvement

Product development has until recently been considered pure art instead of being a controllable process. However, the current competitive environment has forced companies to take a closer look in the way new products are being developed. A key element in this assessment is the development of a set of metrics, which describe the whole product development process. This article explores the data-based opportunities for continuous improvement in the product development process emerging alongside the increasing utilization of networked Information Technology (IT) applications. Based on data from information systems in the case-study companies, three different product process visualizations are presented. Each visualization is discussed both from the viewpoint of its explanatory power as well as its limitations.The results of the case-studies clearly indicate that the computerization of the engineering and design processes is generating new ways of measuring, understanding and improving product development. The appropriate measures combined with open communication and a learning environment can be used to create a cycle of continually improving the product development process.     

Treatment of adrenoleukodystrophy with bone marrow transplantation

Three children with adrenoleukodystrophy (ALD) underwent allogeneic bone marrow transplantation (BMT) between 1992 and 1993. The first boy had attention deficits, marked neuropsychological deficits and widespread demyelination in the frontal lobes on MRI before transplantation. Four years later he has mentally deteriorated and the demyelination on MRI has progressed. The second boy had no symptoms but had white matter lesions on MRI when diagnosed. He was regularly followed with MRI and neuropsychological investigations until BMT 18 months later. A progress of the lesions was noted on the initial MRI investigations, and 4 months before BMT a worsening of deficits in attention and kinaesthetic praxis could be observed. He rapidly deteriorated after the transplantation and died 18 months later. Both PCR and in situ hybridization confirmed the presence of donor cells in the brain. The third boy had no symptoms but white matter lesions on MRI when diagnosed. The neuropsychological tests remained normal but a slight progress was observed on MRI just before transplantation. This boy is still healthy 3.5 years after BMT. BMT as treatment for ALD has to be considered very early, even if a child without symptoms but signs of demyelination on MRI, if a suitable donor is available.     

Grafting of unsaturated acids and silanes to ethylene polymers: A kinetic model

A general kinetic model was developed to simulate the grafting of monomers such as unsaturated carboxylic acids and silanes to ethylene polymers. The polymers considered were ethylene-co-vinyl acetate (EVA), ethylene-co-butyl acrylate (EBA), and low-density polyethylene (LDPE). Grafting was assumed to proceed by a free-radical mechanism involving chain transfer. Organic peroxides having a strong tendency for hydrogen abstraction were selected as the source of primary radicals. The model simulated the grafting reaction as taking place in a single screw extruder. The residence time distribution in the extruder was experimentally determined by tracer analysis, according to which the extruder was a plug-flow reactor connected to two mixed reactors in parallel. The model is able to predict the extent of grafting in terms of predefined parameters. Comparison of model predictions with available experimental data showed slight deviations, the possible causes of which are discussed. However, the kinetic behavior expected on the basis of the input parameters was observed, and, as such, the model allowed study of the effect of process variables on grafting kinetics and provided insight into the reaction mechanism.     

Recurrent DNA copy number changes in 1q, 4q, 6q, 9p, 13q, 14q and 22q detected by comparative genomic hybridization in malignant mesothelioma

Comparative genomic hybridization (CGH) analyses were performed on 27 human pleural mesothelioma tumour specimens, consisting of 18 frozen tumours and nine paraffin-embedded tumours, to screen for gains and losses of DNA sequences. Copy number changes were detected in 15 of the 27 specimens with a range from one to eight per specimen. On average, more losses than gains of genetic material were observed. The loss of DNA sequences occurred most commonly in the short arm of chromosome 9 (p21-pter), in 60% of the abnormal specimens. Other losses among the abnormal specimens were frequently detected in the long arms of chromosomes 4 (q31.1-qter, 20%), 6 (q22-q24, 33%), 13 (33%),14 (q24-qter, 33%) and 22 (q13, 20%). A gain in DNA sequences was found in the long arm of chromosome 1 (cen-qter) in 33% of the abnormal specimens. Our analysis is the first genome-wide screening for gains and losses of DNA sequences using comparative genomic hybridization in malignant pleural mesothelioma tumours. The recurrent DNA sequence changes detected in this study suggest that the corresponding chromosomal areas most probably contain genes important for the initiation and progression of mesothelioma.     

Copolymers of ethylene with butene-1 and long chain α-olefins. I. Decene-1 as long chain α-olefin

The possibility was studied of using decene-1 as comonomer with ethylene in a slurry type polymerization with Ziegler–Natta catalysts. Under the reaction conditions used decene contents remained at the 2 wt% level in ethylene/decene-1 copolymers. When additionally butene-1 was present in the polymerization, decene-1 contents were significantly higher. A synergistic effect was identified in the reactivities of butene-1 and decene-1 in terpolymerization with ethylene. The comonomer reactions were determined and comonomer contents measured by ¹³C-NMR spectroscopy. Decene-1 content had an effect on the polymer density and crystallinity, but virtually no effect on melting temperature. With high comonomer contents an additional melting range was identified in DSC curves at about 100°C.