Visualization of a pharmaceutical unit operation: wet granulation

Recent developments in the field of process engineering and manufacturing sciences enable a new level of process understanding. However, extracting this understanding from increasing amounts of information is challenging. The aim of this study was to create a process vector from a model process describing all relevant information and, by that means, create a tool for combining and visualizing this information. Physical (impeller torque and temperature) and chemical (near-infrared spectroscopy) information from a small-scale high-shear granulation was used in the process vector. The vectors created were visualized by two different methods: principal component analysis (PCA) and the self-organizing map (SOM). None of the individual measurement techniques were able to describe the state of the process alone, although they provided important information about the process. By combining the data and visualizing it, an overview could be achieved. The SOM approach had two advantages over the PCA: it presented the results in terms of the original variables and enabled the analysis of nonlinear responses. However, both visualization methods could be used to describe the progress of the process and to increase the level of process understanding.     

Light transmission model for determination of the refractive index of solid particles in suspensions: an immersion study

We report on a model to determine the light transmission of solid particles in immersion liquids. Using the model, optical and physical properties of suspensions such as the refractive index of the particles can be retrieved. The model can also be used in the case of colored suspensions, where the detection of only the maximum transmission would give an inaccurate refractive index for a particle. The validity of the method was tested with CaF(2) particles. Potential applications include scientific studies of the optical properties of micro- and nanoparticles or microorganisms in a liquid matrix. The model is also useful in industry where monitoring of suspensions and colloids is an issue.     

Three-dimensional modeling of removal torque and fracture progression around implants

In the present study, a model for simulations of removal torque experiments was developed using finite element method. The interfacial retention and fracturing of the surrounding material caused by the surface features during torque was analyzed. It was hypothesized that the progression of removal torque and the phases identified in the torque response plot represents sequential fractures at the interface. The 3-dimensional finite element model fairly accurately predicts the torque required to break the fixation of acid-etched implants, and also provides insight to how sequential fractures progress downwards along the implant side.     

Low Temperature Characteristics of the Metal–Superconductor NIS Tunneling Thermometer

We discuss the temperature dependence of a common low temperature local thermometer, a tunnel junction between a superconductor and a normal metal (NIS junction). Towards the lowest temperatures its characteristics tend to saturate, which is usually attributed to selfheating effects. In this technical note, we reanalyze this saturation and show that the temperature independent subgap current of the junction alone explains in some cases the low temperature behavior quantitatively.

     

Ion-implanted capacitively coupled silicon strip detectors with integrated polysilicon bias resistors processed on a 100 mm wafer

Double-sided silicon strip detectors with integrated coupling capacitors and polysilicon resistors have been processed on a 100 mm wafer. A detector with an active area of 19 × 19 mm² was connected to LSI readout electronics and tested. The strip pitch of the detector is 25 μm on the p-side and 50 μm on the n-side. The readout pitch is 50 μm on both sides. The number of readout strips is 774 and the total number of strips is 1161. On the p-side a signal-to-noise of 35 has been measured using a ⁹⁰Sr β-source. The n-side has been studied using a laser.     

Correction to: Embrittlement Analysis of Σ5[210]/(-1-20) FeAl Grain Boundary in Presence of Defects: An Ab Initio Study

Metallurgical and Materials Transactions A -     

Comparison of benign and malignant follicular thyroid tumours by comparative genomic hybridization

DNA copy number changes were compared in 29 histologically benign follicular adenomas, of which five were atypical, and 13 follicular carcinomas of the thyroid by comparative genomic hybridization. DNA copy number changes were frequent in adenomas (14 out of 29, 48%). Most changes were gains, and they always involved a gain of the entire chromosome 7 (10 out of 29, 34%); other common gains involved chromosomes 5 (28%), 9 (10%), 12 (24%), 14 (21%), 17 (17%), 18 (14%) and X (17%). Losses were found only in four (14%) adenomas. Two of the five atypical adenomas had DNA copy number losses, and none had gains. Unlike adenomas, gains were rare and losses were frequent in carcinomas. A loss of chromosome 22 or 22q was particularly common in carcinomas (6 out of 13, 46%), whereas a loss of chromosome 22 was found in only two (7%) adenomas, one of which was atypical (P = 0.002). A loss of 1p was also frequent in carcinomas (31%), but gains of chromosomes 5, 7, 12, 14 or X that were common in adenomas were not found. Loss of chromosome 22 or 22q was present in six of the eight widely invasive follicular carcinomas, but in only one of the five minimally invasive carcinomas. We conclude that large DNA copy number changes are common in thyroid adenomas. These changes are strikingly different from those found in follicular carcinomas consisting of few losses and frequent gains, especially those of chromosome 7. A loss of chromosome 22 is common in widely invasive follicular carcinoma.     

Genomic alterations in fallopian tube carcinoma: comparison to serous uterine and ovarian carcinomas reveals similarity suggesting likeness in molecular pathogenesis

Serous carcinomas of the fallopian tube, uterus, and ovary resemble each other both histologically and in clinical behavior. Comparative genomic hybridization was performed on 20 primary fallopian tube carcinoma specimens to find regions of the genome involved in tubal carcinogenesis and to compare the genomic alterations with those previously detected in serous ovarian and uterine carcinomas. The most frequent changes detected in fallopian tube carcinoma were gains at 3q (70%) and 8q (75%), with high-level amplifications in several cases. Other common gains occurred at 1q, 5p, 7q, 12p, and 20q. The most frequent losses were found at 18q, 8p, 4q, and 5q. The frequency and the pattern of chromosomal changes detected in tubal carcinoma were strikingly similar to those observed in serous ovarian and uterine carcinomas, suggesting common molecular pathogenesis.