Short communication: High frequency of β-lactam-resistant Staphylococcus aureus in artisanal coalho cheese made from goat milk produced in northeastern Brazil

Reports of β-lactam-resistant Staphylococcus aureus in artisanal goat cheese are increasing, and this phenomenon is relevant to public health. The objective of the present study was to determine the prevalence of S. aureus strains carrying the blaZ and mecA resistance genes, as well as the genes encoding the staphylococcal enterotoxins SEA, SEB, SEC, SED, SEE, and TSST-1 in artisanal coalho cheese made from goat milk produced in northeastern Brazil. We used biochemical and molecular tests to characterize 54 S. aureus isolates found in artisanal coalho cheese collected from commercial establishments producing animal products in 11 municipalities of Pernambuco State, Brazil. A PCR analysis revealed that 42.6% (23/54) of the isolates were positive for the blaZ gene, and 7.4% (4/54) were resistant to methicillin by phenotypic testing. We did not detect mecA or any genes encoding enterotoxins. The presence of S. aureus carriers of the blaZ gene and the identification of methicillin-resistant S. aureus strains are of concern for the health of consumers of this type of cheese.     

Ore-blending optimization model for sintering process based on characteristics of iron ores

An ore-blending optimization model for the sintering process is an intelligent system that includes iron ore characteristics,expert knowledge and material balance.In the present work,14 indices are proposed to represent chemical composition,granulating properties and high temperature properties of iron ores.After the relationships between iron ore characteristics and sintering performance are established,the "two-step" method and the simplex method are introduced to build the model by distinguishing the calculation of optimized blending proportion of iron ores from that of other sintering materials in order to improve calculation efficiency.The ore-blending optimization model,programmed by Access and Visual Basic,is applied to practical production in steel mills and the results prove that the present model can take advantage of the available iron ore resource with stable sinter yield and quality performance but at a lower cost.     

Electrochemical behavior of the Ti–6Al–4V alloy coated with a-C:H films

In this work diamond-like carbon films were deposited on the Ti–6Al–4V alloy, which has been used in aeronautics and biomedical fields, by electrical discharges using a magnetron cathode and a 99.999% graphite target in two different atmospheres, the first one constituted by argon and hydrogen and the second one by argon and methane. Films deposited using the argon/hydrogen mixture were called a-C:H, while films deposited using the argon/methane mixture were called DLC. Raman spectroscopy was used to study the structure of the films. The Raman spectra profile of the a-C:H films is quite different from that of the DLC films. The disorder degree of the graphite crystalline phase in a-C:H films is higher than in DLC films (a-C:H films present small values for the the I_D/I_G ratio). Potentiodynamic corrosion tests in 0.5 mol l⁻¹ NaCl aqueous solution, pH 5.8, at room temperature (≈25 °C) were carried out as for the a-C:H as for the DLC coated surfaces. Comparison between the corrosion parameters of a-C:H and DLC coated surfaces under similar deposition time, showed that DLC coated surfaces present bigger corrosion potential (E_corr) and polarization resistance than those coated with a-C:H films. Electrochemical impedance spectroscopy (EIS) was also used to study the electrochemical behavior of a-C:H and DLC coated surfaces exposed to 0.5 mol l⁻¹ aqueous solution. The EIS results were simulated with equivalent electrical circuit models for porous films. The results of these simulations showed similar tendency to the one observed in the potentiodynamic corrosion tests. The DLC film resistance and the charge transfer resistance (R_ct) for the DLC coated surface/electrolyte interface were bigger than the ones determined for the a-C:H coated surfaces.     

Effect of a new fermented soy milk product on serum lipid levels in normocholesterolemic adult men

This study was undertaken to verify the effect of a daily intake of a new fermented soy milk produced with Enterococcus faecium and Lactobacillus jugurti on the serum lipid levels in normocholesterolemic middle-aged men. The study was randomized, double-blind and placebo-controlled and was performed for a period of 6 weeks. Forty-four normocholesterolemic healthy, male volunteers, aged 40-55 years old were randomly separated in two groups: The F-group received 200 ml of the fermented product daily and the P-group received 200 ml of placebo (chemically fermented). The blood samples were drawn initially and after 3 and 6 weeks and serum values for total cholesterol, HDL-cholesterol and triglyceride were determined. The LDL-cholesterol value was estimated. No significant changes in the fermented group (F) were observed for total cholesterol, LDL-cholesterol or triglyceride levels, while the HDL-cholesterol level was significantly higher (p < or = 0.05) after 6 weeks. The total cholesterol and LDL-cholesterol levels were significantly higher (p < or = 0.05) in the placebo group (P), but no changes were found for the HDL-cholesterol and triglyceride levels during the experimental period. In conclusion, the intake of 200 ml/day of the fermented soy milk, produced with E. faecium and L. jugurti, for 6 weeks, did not affect the serum total cholesterol and LDL-cholesterol, and led an increase of 10% in the HDL-cholesterol level.     

The influence of different zeolitic supports on hydrogen production and waste degradation

The photocatalyst composition affects the chemical–physical properties and directly impacts photocatalytic activity, both in the hydrogen production and degradation of organic contaminants. In this work, the influence of zeolitic structures NaA, NaY, and ZSM-5 combined with a 10% active phase, TiO₂ catalyst doped with 1% copper, and cobalt cocatalysts was tested to mineralize the reactive blue dye (CI250) and to produce hydrogen by photocatalysis under ultraviolet radiation. The band gap energy was affected mainly by the cocatalyst, while the Brunauer-Emmett-Teller method (BET) area was affected by the zeolite structure as well as the X-ray diffraction (XRD). The most active catalyst was the Cu@TiO₂/NaY, which promoted a hydrogen production rate of 240 μmolH₂gcat⁻¹ using 10% ethanol (v/v) aqueous solution as a sacrificial agent and mineralization of 53% of the organic dye, followed by the catalysts impregnated on ZSM-5 zeolites, which had discolouration up to 50% and hydrogen evolution of 92.6 and 109.7 μmolH₂gcat⁻¹ for the catalyst doped with Cu and Co, respectively.     

Niobium and tantalum recovery from the primary source and from tin slag,an industrial challenge: A review

Niobium (Nb) and Tantalum (Ta) are used to increase materials' mechanical resistance and produce lighter alloys. Worldwide Nb production reached 78 000 t in 2020. The reduced ore offer justifies the recycling of these metals from tin slag, contributing to the circular economy. Nb₂O₅ and Ta₂O₅ extraction either from the primary source or the tin slag is an industrial challenge. Nb and Ta dissolution processes already implemented are fluoride leaching, sulphuric leaching, alkaline leaching, and alkaline roasting. The fluoride process raises environmental concerns about waste control. The sulphuric method can be managed to have higher Nb and Ta extraction in a less aggressive process, if some changes are implemented, such as increasing the number of extraction steps, decreasing the pulp density, or increasing the temperature; however, the efficiency of this methodology must be tested for tin slag. The alkaline method seems to be more selective to Nb and Ta by reactants and temperature control. Despite those well-established Nb and Ta treatments, they must be adapted to recover Nb and Ta from slag. The slag has low Nb and Ta content, while high Si and Ca concentrations exist in the matrix. This paper brings the main methods used to extract the Nb and Ta from the primary resources and an overview of Nb and Ta recovery from the slag. This investigation comes as a tool to guide the development of new methods to recover Nb and Ta from low-grade sources such as tin slag.     

Butyltin(IV) Benzoates: Inhibition of Thioredoxin Reductase,Tumor Cell Growth Inhibition,and Interactions with Proteins

Thioredoxin reductase (TrxR) is overexpressed in cancer cells and is therefore a putative cancer target. Inhibition of this enzyme is considered an important strategy for the development of new chemotherapeutic agents with a specific mechanism of action. Organotin compounds have been described as experimental antitumor agents, yet their mechanism of action remains largely unknown. Based on the outcome of a virtual screening study, various di‐ and tri‐n‐butyltin(IV) carboxylates were synthesized, and their biological properties were evaluated. All synthesized compounds were able to inhibit TrxR selectively within the micromolar range and showed potent antitumor activity against HT‐29 and MCF‐7 cancer cell lines. Moreover, tin(IV) organometallics were found to strongly induce apoptosis in the BJAB lymphoma cell line. Mass spectrometry and atomic absorption spectroscopy experiments revealed metal binding to proteins, and efficient cellular uptake was observed using a di‐n‐butyltin(IV) complex as an example.     

Functionalization of wool fabric with phase‐change materials microcapsules after plasma surface modification

The use of microcapsules has increased in several different areas, namely, textile applications. They have been used as a possible means of introducing new properties, namely, in medical care by antibiotics, skin moisturizers, and other drugs and for thermal comfort. In this study, we examined the influence of dielectric barrier discharge (DBD) plasma treatment on the adhesion of phase‐change material (PCM) microcapsules on wool fabric. Several experimental techniques were used to evaluate the wool surface modification after plasma treatment and the influence of the microcapsules' resistance to washing conditions, namely, the determination of the static and dynamic contact angles, surface energy, and adhesion work; X‐ray photoelectron spectroscopy; Fourier transform infrared spectroscopy; differential scanning calorimetry; and scanning electron microscopy. Chemical and physical characterization of the wool fiber in the fabric confirmed significant surface modification. The plasma treatment greatly increased the hydrophilicity, surface energy, and adhesion work of the wool fabric; this proved that more microcapsules were adsorbed on the fabric and more microcapsules remained on the fabric surface after the washing procedures. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effect of Immersion Time in Osmosis and Ultrasound on Papaya Cell Structure during Dehydration

The effect of ultrasound-assisted osmotic dehydration applied at atmospheric pressure for different lengths of time on papaya tissue structure was evaluated. Ultrasound induced the loss of cellular adhesion, formation of large cell interspaces, and light rupture of the cell walls. The changes in the tissue structure caused by ultrasound application increased sugar loss, water loss, and effective water diffusivity. Ultrasound-assisted osmotic dehydration induced a gradual distortion in the shape of the cells, loss of cellular adhesion, and the formation of large channels caused by rupture of the cell walls. The changes caused by the application of osmotic dehydration resulted in high water loss and sugar gain.