Electrochemical preparation of pinacol allylboronic esters

The electroreduction of allylic halide derivatives in the presence of pinacolborane afforded allylboronic pinacol esters with moderate to good yields (up to 86%) and high regioselectivities. The electrosynthesis was carried out in a single-compartment cell with an Al anode, in THF at room temperature and it constitutes an alternative route for the preparation of allylboronic esters under mild conditions.     

Impact of Surfactant Chemistry on Bubble Column Systems

The impact of surfactant addition on the overall holdup, drag coefficient, and bubble size distribution (BSD) in a bubble column operating at industrially relevant superficial velocities was analyzed. A range of surfactants was examined, including alcohols, sugars, and antifoaming agents. It was ascertained that the effect of a surfactant on the holdup and BSD could be related to the chemical structure of the compound, specifically its hydrophilic/hydrophobic nature as characterized by the octanol/water partition coefficient. Addition of 2‐propanol to an air/water system induces a behavior similar to the fermentation media used in aerobic bioprocesses, meaning that such a system can be applied as a meaningful physical analogue in pilot‐scale experimentation.     

Ultranarrow bandpass hybrid filter with wide rejection band

The theoretical study and the experimental realization of an ultranarrow bandpass filter, joining a fiber Bragg grating and a dielectric mirror directly deposited at the extremity of the fiber tip, is presented. The features of such a filter are in very good accordance with the results of theoretical simulations.     

Attraction of Dibrachys cavus (Hymenoptera: Pteromalidae) to its Host Frass Volatiles

The European grapevine moth, Lobesia botrana (Lepidoptera: Tortricidae), is a polyphagous insect able to develop on grapes and wild plants. We tested the hypothesis that the parasitoid Dibrachys cavus (Hymenoptera: Pteromalidae) uses the larval frass in its host search. A two-armed olfactometer was used to measure the attractiveness of L. botrana larvae, their silk, or their frass after larvae were fed on different host plants. Frass of three Lepidoptera (L. botrana, Eupoecillia ambiguella, Sphinx ligustri) and one Orthoptera (Chorthippus brunneus) was assayed, but only L. botrana was used to test an effect of the larval host plant (two grape cultivars and three other plant species) to D. cavus females. Larvae without frass did not attract D. cavus whatever their origin, but their frass was attractive at a dose of 2–3 days equivalent of larval frass production. The silk produced by a single larva (L. botrana) was not attractive to D. cavus. The parasitoid was most attracted to the odor of S. ligustri; the frass of L. botrana was more attractive than that of E. ambiguella, irrespective of the species on which D. cavus had been reared. There was no difference in attractiveness of frass collected from L. botrana raised on food containing different plants. Chemical extracts using five different polarity solvents (acetone, dichloromethane, hexane, methanol, and water) differed in attractiveness to D. cavus. Water and dichloromethane were the most attractive. This suggests that a complex volatile signal made from intermediate to polar volatiles may be involved in attraction. D. cavus used frass to discriminate between different potential host species. Our results revealed that the larval food of L. botrana did not modify frass attractiveness, but that the moth species did.     

From a two-dimensional chemical pattern to a three-dimensional topology through selective inversion of a liquid-liquid bilayer

Soft organic surfaces with more and more complex topologies are required daily to engineer appropriate microstructures for many different applications such as DNA array technology, biological optics for advanced photonic systems and microfluidics. Complementarily to conventional lithographic processes, several pioneering methods have been developed recently, by controlling phase separation of polymer blends, spinodal decomposition of homopolymers or by using the action of additional external forces driving diverse instabilities. Here we present a method that not only provides original concepts towards the three-dimensional (3D) structuring of liquids, on the basis of the synergistic effects of molecular diffusion and confined nucleation, but also suggests original solutions for the transport, mixing and filtering of small volumes of liquid. Through the intrinsic destabilization of a liquid-liquid bilayer, the 2D pattern of a chemically structured surface with 'hydrophilic' and 'hydrophobic' domains is transferred to a solid/liquid interface as a 3D topography with either 'positive' or 'negative' replication. This easy-to-use process has potential applications in various technological realms requiring a specific topography at interfaces such as microfluidics or biosensors.     

A new methodology to optimize spiral bevel gear topography

This paper aims to present the new method developed to generate optimized spiral bevel gear surfaces. Thanks to a complex non linear finite element model, the geometrical gear meshing positions under operational loads are first precisely computed. These meshing positions are then used as inputs of a calculation process that seeks to define the best tooth surface topography. So far, this activity was based on sensitivity studies conducted directly by the designer, which led to repeat calculations whose progress was difficult to control.     

Mesoporous hydroxyapatite by hard templating of silica and carbon foams for protein release

Calcium phosphates, particularly hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ (HA), are widely used for bone regeneration due to their biocompatibility and good resorption properties. However, their performance upon implantation is improved when they are associated with bioactive molecules such as growth factors. Using mesoporous HA leads to improved protein adsorption and release kinetics because the diameter of the mesopores (2–50 nm) is in the same range as their size. We prepared this type of material by the nanocasting method using three different templates: a silica foam and two carbon templates derived from it using propylene or sucrose as carbon source. We investigated the influence of the template, the calcination temperature and of the conditions during template removal. We obtained HA materials with a surface area of up to 90 m² g^?1 and with an intergranular mesopore volume of up to 0.4 cm³ g^?1. In this paper, we show for the first time that the synthesis of mesoporous HA from a mesoporous silica foam template allows eliminating the template at lower temperatures (in an alkaline medium), thus preventing the sintering of the HA. These materials have interesting properties for drug delivery applications. The protein adsorption and release capacities of these HAs were tested with two model proteins, bovine serum albumin (BSA), and Cytochrome C. These materials are an important milestone for future bone regeneration systems based on HA associated with human growth factor proteins.     

How does live yeast differ from sodium bicarbonate to stabilize ruminal pH in high-yielding dairy cows?

The objectives of this study were to evaluate the capacity of 2 dietary feed additives, sodium bicarbonate and live yeast Saccharomyces cerevisiae (strain Sc 47), in optimizing ruminal pH in dairy cows and to determine their modes of action. Three early lactating Holstein cows, fitted with ruminal cannulas, were allocated in a 3 × 3 Latin square design. They were given a total mixed ration as control diet (CD) at a daily feeding rate of 28.0 kg of dry matter (DM)/cow supplemented with 150 g/d of sodium bicarbonate (SBD) or 5 g/d of live yeast (YD) during a 21-d experimental period (14 d of diet adaptation, 4 consecutive days of measurement and sampling and 3 d of transition). The pH and redox potential (E_h) were measured from 1 h before feeding to 8 h after feeding at 1-h intervals, and samples of ruminal fluid were taken at 0, 2, 4, 6, and 8 h after feeding for the determination of volatile fatty acids and lactate concentrations. Total tract apparent digestibility of the diet was also determined. Ruminal pH fluctuated between 6.53 at feeding and 5.57 at 5 h postfeeding. Mean pH was greater with SBD (6.21) and YD (6.14) compared with CD (5.94), showing that both additives had a pH stabilization effect. The E_h varied from -88 mV at 1 h before feeding to -165 mV at 1 h after feeding. Mean E_h and Clark's Exponent (rH) were lower with YD (-149 mV and 7.31, respectively) than with SBD (-137 mV and 7.85, respectively) and CD (-115 mV and 8.05, respectively), indicating that the yeast strengthened the reducing power of the milieu. Total volatile fatty acids were greater in SBD (95.3 mM) and YD (99.4 mM) compared with CD (85.3 mM). Acetate concentration was greater in SBD (60.8 mM) and YD (59.1 mM) compared with CD (53.2 mM). Propionate concentration was greater in YD (25.8 mM) than in SBD (20.0 mM) and CD (18.0 mM). Butyrate remained constant between diets. Mean total lactate concentrations were 16.5, 12.2, and 5.4 mM for CD, SBD, and YD, respectively, with a 67% decrease with YD. Total tract organic matter digestibility was greater for YD (66.6%) compared with SBD (61.7%) and CD (62.2%). The neutral detergent fiber digestibility was greater with YD (41.6%) compared with SBD (34.3%) and CD (29.6%), whereas acid detergent fiber digestibility was greatest in YD (32.3%), intermediate in SBD (24.4%), and lowest in CD (18.1%). By inducing a lower ruminal E_h and rH, live yeast prevented accumulation of lactate and allowed better fiber digestion, whereas sodium bicarbonate seemed to act only as an exogenous buffer.     

Investigation of Simultaneous 2R Regeneration of Two 40-Gb/s Channels in a Single Optical Fiber

We experimentally investigate the simultaneous all-optical signal processing of two 40-Gb/s wavelength-division-multiplexing optical streams spaced by 5 nm using self-phase modulation and offset filtering in a single highly nonlinear fiber to achieve a 2R optical regeneration. Using a bidirectional configuration, we demonstrate efficient mitigation of the interchannel crosstalk. We experimentally observe no degradation of the regenerator performance arising from the presence of the second channel as compared to the single-channel case.