Spontaneous Formation of Complex Periodic Superstructures under High Interferential Illumination of Small‐Molecule‐Based Photochromic Materials

A series of push‐pull azo compounds containing bulky substituents are synthesized, yielding fully amorphous materials with glass‐transition temperatures above 200 °C. Thin films are subjected to holographic illumination and show superior bulk photomigration in terms of speed and efficiency compared to materials exhibiting similar electronic and photochromic properties in the solid state. The reported results give evidence that a microscopic consideration of the free volume rather than macroscopic parameters like the glass‐transition temperature should to be adopted to interpret the matrix stiffness and its deformation ability. Irradiation performed at higher laser intensity produces periodic superstructures whose height is five to six times as high as the initial film thickness. The surface tension and instability effects are put forward to interpret the growth of such superstructures.     

Investigation of the thiotolerance of metallic ruthenium nanoparticles: A XAS study

In situ XAS at the Ru K edge was used to investigate the thiotolerance of metallic ruthenium supported on partially dealuminated acidic Y zeolite (Ru°/HYd, obtained by reduction at 673 K of Ru(NH₃)₆³⁺/HYd). After 3 h at 523 K under 350 ppm H₂S in H₂ the formation of 1.9 Ru–S bond per Ru atoms is observed without modification of the core of the metallic particles (the number of Ru neighbors is unchanged). These results are compared to those obtained after reductive sulfidation of the same sample in order to understand the origin of the high hydrogenation activity of metallic ruthenium in the presence of H₂S.     

Retrieval of CO from nadir remote-sensing measurements in the infrared by use of four different inversion algorithms

Four inversion schemes based on various retrieval approaches (digital gas correlation, nonlinear least squares, global fit adjustment, and neural networks) developed to retrieve CO from nadir radiances measured by such downward-looking satelliteborne instruments as the Measurement of Pollution in the Troposphere (MOPITT), the Tropospheric Emission Spectrometer (TES), and the Infrared Atmospheric Sounding Interferometer (IASI) instruments were compared both for simulated cases and for atmospheric spectra recorded by the Interferometric Monitor for Greenhouse Gases (IMG). The sensitivity of the retrieved CO total column amount to properties that may affect the inversion accuracy (noise, ancillary temperature profile, and water-vapor content) was investigated. The CO column amounts for the simulated radiance spectra agreed within 4%, whereas larger discrepancies were obtained when atmospheric spectra recorded by the IMG instrument were analyzed. The assumed vertical temperature profile is shown to be a critical parameter for accurate CO retrieval. The instrument's line shape was also identified as a possible cause of disagreement among the result provided by the groups of scientist who are participating in this study.     

Prediction of improvement in coping pathology in hospitalized psychiatric patients: A replication study.

Conducted a replication of a study by the authors (see record 1973-21504-001) on the prediction of modifications in coping pathology during psychiatric hospitalization. 65 patients were assessed at the time of admission and again at discharge by multiple Os. The battery of 7 predictor scales used measured concepts of premorbid adjustment (expressed both positively and negatively as ego strength and previous history of failure), level of manifest distress at intake, and negative expectations regarding psychotherapy. The multiple correlation found was .57 (p     

Surface Self-Transforming FeTi-LDH Overlayer in Fe2O3/Fe2TiO5 Photoanode for Improved Water Oxidation

Integrating hematite nanostructures with efficient layer double hydroxides (LDHs) is highly desirable to improve the photoelectrochemical (PEC) water oxidation performance. Here, an innovative and facile strategy is developed to fabricate the FeTi-LDH overlayer decorated Fe₂O₃/Fe₂TiO₅ photoanode via a surface self-transformation induced by the co-treatment of hydrazine and NaOH at room temperature. Electrochemical measurements find that this favorable structure can not only facilitate the charge transfer/separation at the electrode/electrolyte interface but also accelerate the surface water oxidation kinetics. Consequently, the as-obtained Fe₂O₃/Fe₂TiO₅/LDH photoanode exhibits a remarkably increased photocurrent density of 3.54 mA cm⁻² at 1.23 V versus reversible hydrogen electrode (RHE) accompanied by an obvious cathodic shift (≈140 mV) in the onset potential. This work opens up a new and effective pathway for the design of high-performance hematite photoanodes toward efficient PEC water oxidation.     

Shape memory epoxy vitrimers based on waste frying sunflower oil

Thermoset polyesters are prepared from epoxidized waste frying sunflower oil (ESO), commercially available epoxy compounds and glutaric acid. Influence of the nature and concentration of bi- and trifunctionnal epoxy compounds on mechanical properties is studied. Static and dynamic mechanical tests are performed. The molar amount of commercial epoxy compounds used ranges from 20% to 80% regarding the molar amount of ESO. It enables to obtain thermosetting polyesters with glass transition temperatures ranging from 6°C to 102°C, as well as storage modulus ranging from 8 GPa to 14 GPa. 40% of trifunctional epoxy compound and 60% of commercial epoxy compound are found to be the best compromises between bio-based content and mechanical properties. Furthermore, shape memory and vitrimer behavior of those epoxy-acid based networks with 60% of commercial epoxy compounds are evaluated both qualitatively and quantitatively by cyclic thermo-mechanical and stress relaxation tests. Excellent shape memory behavior with fixity ratios above 94% and recovery ratios above 98% is demonstrated. A transesterification catalyst is needed to obtain good vitrimer behavior. Overall, thanks to the previously mentioned properties of those partially biobased thermosets polyesters, industrial applications such as protective coatings, foams and temperature-memory polymer actuators might be considered.     

Parametric study of a yellow birch surface impregnation process

Wood is a renewable resource that has been used as a material in appearance products for years. Despite its acceptable mechanical resistance, different modification processes were developed to enhance wood’s hardness and make it an even more durable material. Impregnating wood pores with monomers under vacuum-pressure cycle is a common method for that purpose. However, most implemented processes are long and mostly submerge wood into a monomer formulation (Bethell’s full-cell process). For that, they can be considered wasteful on the quantity of materials used, energy consumed and on process duration. The objective of this paper was to evaluate the parameters that influence the penetration of monomers into the tangential surface of Yellow birch (Betula alleghaniensis Brit.) samples. The analyzed factors were the monomer formulation’s viscosity, the surface temperature, the vacuum level applied to the process, the anatomy of samples, and the absorption time. After impregnation, the weight gain of the samples was calculated. Monomer penetration depth was calculated and visualized using density profiles and micro X-ray tomography imaging. Results showed that using a low viscosity monomer formulation allied to a certain level of vacuum and absorption time can considerably increase the impregnation into the wood.

     

The Impact of Mouse Preterm Birth Induction by RU-486 on Microglial Activation and Subsequent Hypomyelination

Preterm birth (PTB) represents 15 million births every year worldwide and is frequently associated with maternal/fetal infections and inflammation, inducing neuroinflammation. This neuroinflammation is mediated by microglial cells, which are brain-resident macrophages that release cytotoxic molecules that block oligodendrocyte differentiation, leading to hypomyelination. Some preterm survivors can face lifetime motor and/or cognitive disabilities linked to periventricular white matter injuries (PWMIs). There is currently no recommendation concerning the mode of delivery in the case of PTB and its impact on brain development. Many animal models of induced-PTB based on LPS injections exist, but with a low survival rate. There is a lack of information regarding clinically used pharmacological substances to induce PTB and their consequences on brain development. Mifepristone (RU-486) is a drug used clinically to induce preterm labor. This study aims to elaborate and characterize a new model of induced-PTB and PWMIs by the gestational injection of RU-486 and the perinatal injection of pups with IL-1beta. A RU-486 single subcutaneous (s.c.) injection at embryonic day (E)18.5 induced PTB at E19.5 in pregnant OF1 mice. All pups were born alive and were adopted directly after birth. IL-1beta was injected intraperitoneally from postnatal day (P)1 to P5. Animals exposed to both RU-486 and IL-1beta demonstrated microglial reactivity and subsequent PWMIs. In conclusion, the s.c. administration of RU-486 induced labor within 24 h with a high survival rate for pups. In the context of perinatal inflammation, RU-486 labor induction significantly decreases microglial reactivity in vivo but did not prevent subsequent PWMIs.     

Biophilic design in architecture and its contributions to health,well-being,and sustainability: A critical review

In the last ten years,'nature'and biophilic design have received widespread atten-tion in architecture,especially in response to growing environmental challenge...