一种新型特级防火卷帘的研究与开发——3J特级防火卷帘

介绍3J特级防火卷帘的各种重要功能特点,讨论其实用性与易用性以及推广该产品的必要性与可行性。     

Residual Stress Simulation of Injection Molding

In this study, distribution and history of residual stresses in plaque-like geometries are simulated based on linear thermoviscoelastic model, which helps to understand the mechanics and evolution of the residual stresses in the injection molding process. The numerical calculation of direction, combined with the specified boundary conditions. Results show that the stress variation across the thickness exhibits a high surface tensile value changing to a compressive peak value close to the surface, with the core region experiencing a parabolic tensile peak. Residual stress distribution throughout the thickness is almost same along the flowpath and the final residual stresses value near the gate is lower than the value near the end of flowpath.     

Detection of failure sites by focused ion beam and nano-probing in the interconnect of three-dimensional stacked circuit structures

Focused ion beam (FIB) and nano-probing were applied for failure analysis of three-dimensional stacked circuits with copper through-silicon-vias between the stacked chips. The failure analysis was done after high temperature storage and thermal cycling tests. Passive voltage contrast in FIB allowed to pinpoint the open sites. FIB cross-sections showed the presence of opens at the bottom of the copper vias. The failure cause was suspected to be an interlayer particle, which was confirmed by optical profilometry. Nano-probing was used on another sample to pinpoint the failure location through the measurement of the local resistance within the daisy chains. The failure was traced out to be related with surface contamination.     

Theoretical Investigation of Time Suboptimal Control of Industrial Manipulators Along Specified Paths

A method for the time suboptimal control of an industrial manipulator from an initial position and orientation to a final position and orientation as it moves along a specified path is proposed. Nonlinear system equations that describe the manipulator motion are linearized at each time step along the path. A method which gives the control inputs (joint angular velocities) for time suboptimal control of the manipulator is developed. In the formulation, joint angular velocity and acceleration limitations are also taken into consideration. A six degree of freedom elbow type manipulator is used in numerical examples to verify the method developed.     

Evaluating non-business e-commerce adoption decision processes and gender roles

Non-business e-commerce adoption refers to the use of e-commerce by not-for profit organizations such as religious organizations, government agencies and academic institutions to reduce their expenses or to improve their operations and customer service. Being a new research niche in the field of e-commerce, non-business e-commerce has received very little or no research attention. This has resulted in a very poor understanding of this niche, especially with regards to its adoption facilitators and inhibitors. Based on this impetus, a field survey of Malaysian Universities was conducted to determine the key factors that facilitate non-business EC adoption as well as the role of gender differential. A comprehensive list of potential facilitators for the strategic use of information technology was derived from extant research reports and used to collect data from five public universities in Malaysia. The data were factor-analysed to determine the key underlying dimensions of facilitators. On the basis of the resulting five dimensions namely, relative advantage orientation, network orientation, information efficiency orientation, innovativeness orientation and competitiveness orientation, regression analysis was done to determine the impact of the five dimensions on adoption. Dummy variable was created for gender and applied in the regression analysis in order to estimate the moderation effect of sex typing on the relationship between the resulting dimensions and adoption. Implications of the findings are discussed.     

变频液压泵控压力流量控制开环实验及其结果分析

该文首先分析了变频液压泵控调速调压实验控制系统的理论基础,从理论上分析加阻尼后系统开环时恒流的可行性;并付诸实验研究;然后结合实验曲线进行分析,阐明其控制性能优劣.     

Inclusions of carbon in ingots of silicon carbide grown by the modified Lely method

The problem of the appearance of carbon inclusions in single-crystal silicon carbide ingots grown by the modified Lely method (the so-called graphitization of the ingot) is analyzed. It is shown that the process of graphitization of the ingot is not related to a deficit of silicon in the growth cell; in contrast, it is excess of silicon at the growth surface that inhibits the ingot growth rate and gives rise to intense corrosion of the graphite fittings.     

I-DEAS软件在轮毂有限元分析中的应用

优化了铝合金轮毂的开发流程.采用I-DEAS软件对铝合金轮毂的弯曲疲劳、径向疲劳及冲击试验进行有限元分析,证明仿真分析可以满足指导车轮设计,优化车轮结构的要求.     

Audio Denoising by Time-Frequency Block Thresholding

Removing noise from audio signals requires a nondiagonal processing of time-frequency coefficients to avoid producing ldquomusical noise.rdquo State of the art algorithms perform a parameterized filtering of spectrogram coefficients with empirically fixed parameters. A block thresholding estimation procedure is introduced, which adjusts all parameters adaptively to signal property by minimizing a Stein estimation of the risk. Numerical experiments demonstrate the performance and robustness of this procedure through objective and subjective evaluations.