Hydrolysis of polyurea under high pressure of carbon dioxide

A chemical decomposition of polyurea (PUA) by hydrolysis under high pressure of carbon dioxide (CO₂) was proposed. The hydrolysis of PUA was carried out at 190 °C for 2 h under 7.0 MPa of CO₂ in the presence of water. The hydrolysis reaction gave white residual solid and water soluble compound. The white residual solid was characterized to be degraded PUA by FT-IR spectrum and elemental analysis. ¹H-NMR spectra of the water soluble compound revealed that the hydrolysis of PUA produced diamine only from repeating unit of PUA, which was a component of PUA. This hydrolysis gave the corresponding diamine for quantitative yields.     

Influence of Relative Position of Gears and Casing Wall Shape of Gear Box on Churning Loss under Splash Lubrication Condition—Some New Ideas

A new rotatable test rig is developed to perform oil churning loss experiments to clarify the influence of the relative position of gears and casing wall shape of gear box under splash lubrication condition. Torque losses are measured and photos are taken using a stroboscope to observe the oil behavior. Based on the test results, it has been confirmed that in addition to the well-known factors, relative position and casing wall shape have significant effects on the churning loss and should be considered in the modeling process, which has been neglected in most previous studies. In this article, the importance of the steady-state oil surface profile (SOSP) is emphasized. New ideas are proposed on how other working conditions such as immersion depth and rotation speed influence the churning loss.     

Role of Cu film texture in grain growth correlated with twin boundary formation

To understand the role of Cu film texture in grain growth at room temperature (RT) in relation to twin boundary formation Cu films were deposited on various barrier materials and the Cu film texture was investigated by X-ray diffraction. Cu grain growth was rapid on a barrierless SiO₂/Si substrate and very slow on a Ta barrier due to strong (1 1 1) texture. The growth rate and the average grain diameter after being kept at RT for up to ∼60 days were maximum at a (2 0 0)_Cu peak to (2 2 2)_Cu peak area ratio of ∼1.0, where {1 1 1}, {1 0 0} and {5 1 1} grains coexisted. Such coexistence of three or more orientations of grains is essential in facilitating Cu grain growth at RT. Similarly, the average twin boundary (TB) density was maximum when Cu grain growth was facilitated. TB formation in nano-sized Cu grains was not controlled by grain size, but due to grain growth. The TB could be annealing twins caused by irregularities in the stacking sequence during relatively fast grain growth. The Cu film texture is concluded to be determined at the beginning of deposition, and the wettability of various barrier materials by the Cu films plays a key role in determining the film texture.     

Synthesis and characterization of 1,3,2-diazaboroine derivatives for organic thin-film transistor applications

2,2′-(1,4-Phenylene)bis(2,3-dihydro-1H-naphtho[1,8-de]-1,3,2-diazaboroine) [PND] and 2,2′-(4,4′-biphenylene)bis(2,3-dihydro-1H-naphtho[1,8-de]-1,3,2-diazaboroine) [BND] were synthesized and characterized by using differential scanning calorimetry (DSC) measurements, single crystal X-ray structure analysis, UV–vis absorption and electrochemical measurements, thin-film X-ray diffraction (XRD) and AFM studies. Organic field-effect transistors (OFETs) were fabricated by vacuum deposition with a bottom contact geometry using Au electrodes. Annealing treatment optimizes the organic active layer and increases the charge carrier mobility. Field-effect mobilities of 7.2 × 10^?3 for PND and 4.1 × 10^?4 cm² V^?1 s^?1 for BND were found.     

Effect of Hydrogen Atmosphere on Pyrolysis of Cured Polycarbosilane Fibers

SiC-based fibers with various chemical compositions were synthesized using an irradiation-curing process. Polycarbosilane (PCS) fibers were cured by irradiation with an electron beam in a helium atmosphere. The cured PCS fibers were pyrolyzed at 1300°C under controlled hydrogen or argon atmospheres, and SiC fibers with C/Si of 0.84 to 1.56 were obtained. The fibers consisted of <1.0 wt% O, <0.2 wt% N, <0.1 wt% H, with the balance being Si and C. The mechanism of pyrolytic transformation of cured PCS to SiC-based ceramics was investigated using TG/DTA analysis. Greater mass losses were observed during pyrolysis in a hydrogen atmosphere than in argon. This result suggests that the hydrogen atmosphere suppresses H₂ evolution and helps to remove excess carbon as CH₄ during pyrolysis. The microstructure and mechanical properties of the resulting SiC-based fibers were found to be very dependent on their C/Si chemical compositions.     

Dynamic in situ observation of automotive catalysts for emission control using X-ray absorption fine structure

Two main pivotal subjects of research in automotive catalysts were studied by modern X-ray absorption analysis techniques. One is oxygen storage/release behaviour, and the other is sintering inhibition of Pt particles. First, three types of CeO₂–ZrO₂ (Ce:Zr = 1:1 molar ratio) compounds with different oxygen storage/release capacities and different structural properties were prepared, and the valence change of Ce as a function of temperature during oxygen release/storage processes was investigated. The reduction of surface Ce mainly occurred in the range 100–170 °C, and the reduction of bulk Ce progressed at high temperatures of 170 °C and above. The Ce reduction behaviour depended not only on the homogeneity of the Ce and Zr for bulk reduction at high temperatures but also on the particle size of the CeO₂–ZrO₂ samples for surface reduction at low temperatures. Secondly, sintering inhibition of Pt in Pt/Al₂O₃, Pt/MgO and Pt/ceria-based catalysts after 800 °C ageing in air was studied. We found that the Pt–O–M (M = Mg, Ce) bond acted as an anchor and inhibited the sintering of Pt particles on MgO or ceria-based oxide. Especially, it was noteworthy that the Pt–O–Ce⁴⁺ bond on the ceria-based support breaks easily through the reduction of Ce (Ce⁴⁺ → Ce³⁺) during the usual stoichiometric and reducing conditions.     

New type of phenolic resin: Curing reaction of phenol‐novolac based benzoxazine with bisoxazoline or epoxy resin using latent curing agent and the properties of the cured resin

In this study, we aimed to reduce the cure time, and to lower the cure temperature of the benzoxazine compound. Therefore, curing reaction of benzoxazine with bisoxazoline or epoxy resin using the latent curing agent and the properties of the cured resins were investigated. The cure behavior of benzoxazine with bisoxazoline or epoxy resin using the latent curing agent was monitored by differential scanning calorimetry and measurements for storage modulus (G′). The properties of the cured resin were estimated by mechanical properties, electrical insulation, water resistance, heat resistance, and flame resistance. As a result, it was confirmed that by using the latent curing agent, cure time of benzoxazine and bisoxazoline or epoxy resin was reduced, and cure temperature was lowered. And it was found that the curing reaction using phenol‐novolac based benzoxazine (Na) as the benzoxazine compound could proceed more rapidly than that using bisphenol‐A based benzoxazine (Ba) as the benzoxazine compound. However, the cured resins from Ba and bisoxazoline or epoxy resin using the latent curing agent showed good heat resistance, flame resistance, and mechanical properties compared with those from Na and bisoxazoline or epoxy resin using the latent curing agent. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

PVDF/PMMA composite nanofiber fabricated by electrospray deposition: Crystallization of PVDF induced by solvent extraction of PMMA component

The crystallization of poly(vinylidene fluoride) (PVDF) was observed after the poly(methyl methacrylate) (PMMA) component was extracted from the PVDF/PMMA (50/50) composite nanofiber fabricated by electrospray deposition, even though the original composite showed a completely amorphous pattern in the wide‐angle X‐ray diffraction. The content of the β‐crystal form in the crystalline region depended on the PVDF/PMMA composite ratios and the type of solvents used for the extraction of the PMMA component, e.g., chloroform and toluene. Thus, the content of the β‐crystal form can be controlled by selecting the original PVDF/PMMA composition and the solvent used to extract the PMMA component. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

USE OF METAL ADSORBING COMPOUNDS (MAC) TO MITIGATE ADVERSE EFFECTS OF HEAVY METALS IN BIOLOGICAL UNIT PROCESSES

The presence of heavy metals on an intermittent basis in the influent of biological unit processes can lead to process upset and poor removal of organics. Heavy metal breakthrough from a pretreatment process may be caused by a number of reasons. In this study, the feasibility of adding metal adsorbing compounds (MACs) into a sequencing batch reactor (SBR) to mitigate the adverse effects of heavy metals breakthrough was investigated. A powdered activated carbon was found to be an effective MAC for heavy metals concentrations varying from 2 to 20mg/L. Organic removal efficiencies in a SBR using MACs were similar to those of a control SBR with no metals in the influent.     

Copolymerization of ethanesultam with 2-methyl-2-oxazoline

Summary This paper describes the so-called No Catalyst Copolymerization between dioxo-1,1-thiazetidine-1,2(Ethanesultam; ESm) and 2-methyl-2-oxazoline. The copolymerization took place without any added initiator to produce copolymers of MeOZO and ESm. The structure of the copolymer was determined by the IR and NMR spectra, elemental analysis, as well as by the result of an alkaline hydrolysis of the copolymer. The reaction scheme of the copolymerization via zwitterion mechanism (Eq 3–5) was proposed.