Self‐Interference Cancellation for Shared Band Transmission in Nonlinear Satellite Communication Channels

For efficient spectral utilization of satellite channels, a shared band transmission technique is introduced in this paper. A satellite transmits multiple received signals from a gateway and terminal in the common frequency band by superimposing the signals. To improve the power efficiency as well as the spectral efficiency, a travelling wave tube amplifier in the satellite should operate near the saturation level. This causes a nonlinear distortion of the superimposed transmit signal. Without mitigating this nonlinear effect, the self‐interference cannot be properly cancelled and the desired signal cannot be demodulated. Therefore, an adaptive compensation scheme for nonlinearity is herein proposed with the proper operation scenario. It is shown through simulations that the proposed shared band transmission approach with nonlinear compensation and self‐interference cancellation can achieve an acceptable system performance in nonlinear satellite channels.     

Effects of isothermal aging and temperature–humidity treatment of substrate on joint reliability of Sn–3.0Ag–0.5Cu/OSP-finished Cu CSP solder joint

This study examined the effects of isothermal aging and temperature–humidity (TH) treatment of substrate on the joint reliability of a Sn–3.0Ag–0.5Cu (wt.%)/organic solderability preservative (OSP)-finished Cu solder joint. Two types of OSP-finished chip-scale-package (CSP) substrates were used, those subjected and not subjected to the TH test. This study revealed an association between the interfacial reaction behaviors, void formation and mechanical reliability of the solder joint. Many voids were formed at the interface of the OSP-finished Cu joint subjected to the TH test. These voids were caused by the oxidation of the OSP-finished Cu substrate during the TH test. In the shear tests, the shear force of the joint with the substrate not subjected to the TH test was slightly higher than that with the TH test. The mechanical reliability of the solder joint was degraded by voids at the interface.     

Design of an Ultra‐Wideband Antenna Using a Ring Resonator with a Notch Function

This paper describes an ultra‐wideband (UWB) antenna that uses a ring resonator concept. The proposed antenna can operate in the entire UWB, and the IEEE 802.11a frequency band can be rejected by inserting a notch stub into the ring resonator. The experiment results indicate that the measured impedance bandwidth of the proposed antenna is 17.5 GHz (2.5 GHz to at least 20 GHz). The proposed UWB antenna has omnidirectional radiation patterns with a gain variation of 3 dBi (1 dBi to 4 dBi).     

Advantages of CDMA and spread spectrum techniques over FDMA andTDMA in cellular mobile radio applications

A unified theoretical method for the calculation of the radio capacity of multiple-access schemes such as FDMA (frequency-division multiple access), TDMA (time-division multiple access), CDMA (code-division multiple access) and SSMA (spread-spectrum multiple access) in noncellular and cellular mobile radio systems is presented for AWGN (additive white Gaussian noise) channels. The theoretical equivalence of all the considered multiple-access schemes is found. In a fading multipath environment, which is typical for mobile radio applications, there are significant differences between these multiple-access schemes. These differences are discussed in an illustrative manner revealing several advantages of CDMA and SSMA over FDMA and TDMA. Novel transmission and reception schemes called coherent multiple transmission and coherent multiple reception are briefly presented     

A 3.3-V single power supply 16-Mb nonvolatile virtual DRAM using aNAND flash memory technology

A 3.3-V 16-Mb nonvolatile memory having operation virtually identical to DRAM with package pin compatibility has been developed. Read and write operations are fully DRAM compatible except for a longer RAS precharge time after write. Fast random access time of 63 ns with the NAND flash memory cell is achieved by using a hierarchical row decoder scheme and a unique folded bit-line architecture which also allows bit-by-bit program verify and inhibit operation. Fast page mode with a column address access time of 21 ns is achieved by sensing and latching 4 k cells simultaneously. To allow byte alterability, nonvolatile restore operation with self-contained erase is developed. Self-contained erase is word-line based, and increased cell disturb due to the word-line based erase is relaxed by adding a boosted bit-line scheme to a conventional self-boosting technique. The device is fabricated in a 0.5-μm triple-well, p-substrate CMOS process using two-metal and three-poly interconnect layers. A resulting die size is 86.6 mm², and the effective cell size including the overhead of string select transistors is 2.0 μm²     

Photocurrent effect on the zero-Bias dynamic resistance of HgCdTe photodiode

A new physical model is presented for the illumination-dependence of the zero-bias resistance-area product (R₀A) of HgCdTe photodiode. The model is based on three independent mechanisms. They are the depletion region volume change with the applied bias, the diffusion distance change with the moving depletion region edge, and the minority carrier accumulation in the depletion region which affects the minority carrier diffusion. Analytic equations are derived for the photodiode current-voltage characteristics and R₀A products. The results of the model have been compared with experimental data obtained from several Hg_0.7Cd_0.3Te diodes with an identical diode structure having different absorbing amount of light. The model showed good agreement with the experimental data.     

A 120-mm2 64-Mb NAND flash memory achieving 180 ns/Byteeffective program speed

Emerging application areas of mass storage flash memories require low cost, high density flash memories with enhanced device performance. This paper describes a 64 Mb NAND flash memory having improved read and program performances. A 40 MB/s read throughput is achieved by improving the page sensing time and employing the full-chip burst read capability. A 2-μs random access time is obtained by using a precharged capacitive decoupling sensing scheme with a staggered row decoder scheme. The full-chip burst read capability is realized by introducing a new array architecture. A narrow incremental step pulse programming scheme achieves a 5 MB/s program throughput corresponding to 180 ns/Byte effective program speed. The chip has been fabricated using a 0.4-μm single-metal CMOS process resulting in a die size of 120 mm² and an effective cell size of 1.1 μm²     

Light‐Induced Surface Modification of Natural Plant Microparticles: Toward Colloidal Science and Cellular Adhesion Applications

Playing an instrumental role in the life of plants, pollen microparticles are one of the most fascinating biological materials in existence, with abundant and renewable supply, ultrahigh durability, and unique, species‐specific architectural features. Aside from their biological role, pollen microparticles also demonstrate broad utility as functional materials for drug delivery and microencapsulation, and increasingly for emulsion‐type applications. As natural pollen microparticles are predominantly hydrophobic, developing robust surface functionalization strategies to increase surface hydrophilicity would increase the range of colloidal science applications, including opening the door to interfacing microparticles with biological cells. This research investigates the extraction and light‐induced surface modification of discrete pollen microparticles from bee‐collected pollen granules toward achieving functional control over the responses elicited from discrete particles in colloidal science and cellular applications. Ultraviolet–ozone treatment is shown to increase the proportion of surface elemental oxygen and ketones, leading to increased surface hydrophilicity, enhanced particle dispersibility, tunable control over Pickering emulsion characteristics, and enhanced cellular adhesion. In summary, the findings demonstrate that light‐induced surface modification improves the functional properties of pollen microparticles, and such insights also have broad implications across materials science and environmental science applications.     

Nonfullerene Electron Transporting Material Based on Naphthalene Diimide Small Molecule for Highly Stable Perovskite Solar Cells with Efficiency Exceeding 20%

This study reports a new nonfullerene electron transporting material (ETM) based on naphthalene diimide (NDI) small molecules for use in high‐performance perovskite solar cells (PSCs). These solar cells simultaneously achieve high power conversion efficiency (PCE) of over 20% and long‐term stability. New NDI‐ID (N,N′‐Bis(1‐indanyl)naphthalene‐1,4,5,8‐tetracarboxylic diimide) consisting of an N‐substituted indane group having simultaneous alicyclic and aromatic characteristics is synthesized by a low‐cost, one‐step reaction, and facile purification method. The partially flexible characteristics of an alicyclic cyclopentene group on indane groups open the possibility of low‐temperature solution processing. The conformational rigidity and aromaticity of phenyl and alicyclic groups contribute to high temporal stability by strong secondary bonds. NDI‐ID has herringbone packed semiconducting NDI cores that exhibit up to 0.2 cm² V^?1 s^?1 electron mobility in field effect transistors. The inverted PSCs based on CH(NH₂)₂PbI_3–xBr_x with NDI‐ID ETM exhibit very high PCEs of up to 20.2%, which is better than that of widely used PCBM (phenyl‐C61‐butyric acid methyl ester) ETM‐based PSCs. Moreover, NDI‐ID‐based PSCs exhibit very high long‐term temporal stability, retaining 90% of the initial PCE after 500 h at 100 °C with 1 sun illumination without encapsulation. Therefore, NDI‐ID is a promising ETM for highly efficient, stable PSCs.     

Few‐Layered WS2 Nanoplates Confined in Co,N‐Doped Hollow Carbon Nanocages: Abundant WS2 Edges for Highly Sensitive Gas Sensors

Edges of 2D transition metal dichalcogenides (TMDs) are well known as highly reactive sites, thus researchers have attempted to maximize the edge site density of 2D TMDs. In this work, metal‐organic framework (MOF) templates are introduced to synthesize few‐layered WS₂ nanoplates (a lateral dimension of ≈10 nm) confined in Co, N‐doped hollow carbon nanocages (WS₂_Co‐N‐HCNCs), for highly sensitive NO₂ gas sensors. WS₂ precursors are assembled in the surface cavity of Co‐based zeolite imidazole framework (ZIF‐67) and subsequent pyrolysis produced WS₂_Co‐N‐HCNCs. During the pyrolysis, the carbonized ZIF‐67 are doped by Co and N elements, and the growth of WS₂ is effectively suppressed, creating few‐layered WS₂ nanoplates functionalized Co‐N‐HCNCs. The WS₂_Co‐N‐HCNCs exhibit outstanding NO₂ sensing characteristics at room temperature, in terms of response (48.2% to 5 ppm), selectivity, response and recovery speed, and detection limit (100 ppb). These results are attributed to the enhanced adsorption and desorption kinetics of NO₂ on abundant WS₂ edges, confined in the gas permeable HCNCs. This work opens up an efficient way for the facile synthesis of edge abundant few‐layered TMDs combined with porous carbon matrix via MOF templating route, for applications relying on highly active sites.