An isogeometrical approach to structural topology optimization by optimality criteria

The Isogeometric Analysis (IA) method is applied for structural topology optimization instead of finite elements. For this purpose, a control point based Solid Isotropic Material with Penalization (SIMP) method is employed and the material density is considered as a continuous function throughout the design domain and approximated by the Non-Uniform Rational B-Spline (NURBS) basis functions. To prevent the formation of layouts with porous media, a penalization technique similar to the SIMP method is used. For optimization an optimality criteria is derived and implemented. A few examples are presented to demonstrate the performance of the method. It is shown that, dissimilar to the element based SIMP topology optimization, the resulted layouts by this method are independent of the number of the discretizing control points and checkerboard free.     

Modeling and controlling the mobile harbour crane system with virtual prototyping technology

Virtual simulation of the real behaviour of mobile harbour crane (MHC) without using the traditional build-and-test method is an imperative approach to the design stage that can increase the quality of the product by reducing manufacturing cost and errors. This paper introduces an engineering model that describes the mechanical behaviour of MHC, and the control design for increasing the position accuracy. Based on a concept of the MHC, a virtual mechanical model was created using SOLIDWOKS, which was then exported to the Automatic Dynamic Analysis of Mechanical System (ADAMS) environment. This model was simulated to investigate the dynamic behaviour of the MHC system. In addition, an adaptive siding mode PID controller was also developed in MATLAB/Simulink to control the crane trolley position and suppress the swing angle of the load. This co-simulation demonstrates the reliability of the mechanical and control functionalities of the developed system.     

The α- to β-Si3N4 transformation in the presence of liquid silicon

The compacts consisted of , -Si₃N₄ and free silicon are heat treated in the range 1650° C to 1750° C in an argon atmosphere in order to observe the following behaviours; the to phase transformation and variations of the microstructure during heat treatment in silicon nitride. For the microstructural observation of the heat treated specimens, the same grains in the polished surface were investigated before and after eliminating the retained silicon by etching. The to phase transformation, in this case, occurs via silicon melts irrespective of added -Si₃N₄. Both and phases are soluted and precipitated into molten silicon and their morphology are changed from an equiaxed shape to prismatic one. Although elongated grains are precipitated at low temperature or in the early stage of heat treatment, fine precipitated grains are mainly observed with increasing heat treating temperature.     

Effects of the preparation Undevit on the indicators of vitamin provision of Norilsk's schoolchildren]

The effect of the prophylactic use of multivitamin "Undevitum" on parameters of vitamin providing of schoolchildren in Norilsk was studied. The results of the investigation showed a positive effect of the prophylactic vitamin administration on providing with vitamins of schoolchildren in Norilsk and proved the necessity of conducting mass vitamin administration to schoolchildren.     

Dielectric properties and microstructural behaviour of B-site calcium-doped barium titanate ceramics

Dielectric properties and microstructural behaviour of Ba_1–x Sr _x Ti_1–y Ca _y O_3–y ceramics, where strontium and calcium were doped on the barium and titanium sites, respectively, within the range 0x0.24 and 0y0.05, were investigated. Calcium addition decreased the tetragonality,c/a, increased the unit cell volume, and lowered the Curie temperature, which were all attributed to the occupancy of Ca²⁺ ions on titanium sites. When sintered at a low oxygen partial pressure of 10^–9 MPa, a resistivity higher than 10¹¹ cm was maintained for the formulations containing B-site calcium substitution more than 0.5 mol %. With increasing the amount of calcium addition, the Curie peak was depressed and completely broadened for the compositions with calcium addition more than 3 mol %, where the average grain size was smaller than 1 m. Co-firing with nickel electrodes in a reducing atmosphere also depressed the Curie peak and inhibited the grain growth due to the diffusion of nickel into the dielectrics.     

Health resort treatment of eye diseases caused by ischemia]

The authors discuss the results of ophthalmodynamometric tests used for the assessment of cerebro-retinal vessels reactivity following carbon dioxide baths and "peat collars". An analysis of systemic and local blood pressure in the ophthalmic artery measured with Weigelin and Lobstein technique enables to assess changes in blood pressures following a/m balneologic procedures. It was found that blood pressure does not change parallelly due to the mechanism of cerebral autoregulation. Transient decrease in blood pressure in the ophthalmic artery is produced by the dilatation of the internal carotid artery indicating a potent vasodilating action of carbon dioxide.     

Microwave surface resistance of epitaxial YBa2Cu3O7 thin films at 18.7 GHz measured by a dielectric resonator technique

We used a dielectric resonator technique for highly sensitive measurements of the temperature dependence of the microwave surface resistanceR _s of 1×1 cm² superconducting films at 18.7 GHz. It consists of a sapphire disc positioned on the film under investigation within a copper cavity which is acting as a radiation shield. In the TE₀₁ oscillation mode the highly reproducible quality factor of about 10⁵ results in a sensitivity of ±50 forR _s measurements. The temperature dependence ofR _s can be measured up to values as high as 1 . We have investigated several YBa₂Cu₃O₇ thin films prepared by high oxygen pressure d.c. sputtering on LaAlO₃ and NdGaO₃. Our best films exhibit a pronounced nonlinear behavior of the d.c. resistivity(T) with(300K)/(100K) values of about 3.7. Those films show, besides the initial fall-off just belowT _c , a further strong decrease ofR _s at low temperatures. This was observed both at 18.7 GHz and 87 GHz, as measured by a conventional cavity end plate replacement technique. ForTT_c/2 these films exhibit an exp (–T _c/T) dependence ofR _s with-values around 0.4. These observations may be explained by a superconducting energy gap with 2/kT _c0.8 for charge carriers localized in the CuO chains for YBa₂Cu₃O₇.     

利用CFD技术研究四边形通道内的流场

了解认知隧道内的流体力学的特点对于隧道火灾的研究和隧道安全建设有着非常大的意义。为了对隧道火灾的特点进行研究,我们使用商用CFD程序STAR-CD对速度场和压力分布进行了数值模拟。模拟过程中在同一入口位置的情况下改变四个出口位置,出口位置与模具高度的数值对别分别为L/H=0,0.375,0.75,1.125。同时还介绍了对于火灾救援和人员疏散的有效措施。     

The use of the aquarium fishes Danio rerio and Poecilia reticulata as highly sensitive species for testing the carcinogenicity of chemical compounds

Aquarium fishes Danio rerio and Poecilia reticulata are recommended as test-objects for testing carcinogenic chemical agents. 30 compounds were tested for their action on these objects. The analysis of the incidence of induced tumors, period of their appearance and Iball index shows high sensitivity of the aquarium fishes to the carcinogenic action. Data are presented on the dynamics of experimental carcinogenesis, morphology of induced tumours, as well as on modifications of carcinogenesis (the role of environmental temperature, age, dose, exposition, etc.). Advantages and limitations of the "fish model" are compared with those found in the experiments carried on mammals.     

The diffusion and solubility of oxygen in solid nickel

Solid-state electrochemical measurements using various experimental procedures were made with the double cell: $$ Ni + NiO|ZrO_2 + Y_2 O_3 |Ni + \underline O |ZrO_2 + Y_2 O_3 |Ni + NiO $$ to determine the diffusivity and thermodynamic functions of oxygen dissolved in solid nickel. Non-steady state diffusion of oxygen in the specimen was caused by applying a preselected potential between the reference and specimen electrodes and was monitored by measuring time-dependent potentials and/or currents. The following results were obtained for the diffusivity of oxygen and the solubility of oxygen in nickel in equilibrium with NiO: $$D{\text{ = 4}}{\text{.9 }} \times {\text{ 10}}^{{\text{ - 2}}} {\text{ exp}}\left( {{\text{ - }}\frac{{{\text{164 kJ/mole}}}}{{{\text{R}}T}}} \right){\text{cm}}^{\text{2}} /{\text{sec (850 to 1400 }}{}^{\text{o}}{\text{C)}}$$ $$C_{\text{O}}^s {\text{ = 8}}{\text{.3 exp}}\left( { - \frac{{55{\text{kJ/mole}}}}{{{\text{R}}T}}} \right){\text{at}}{\text{. pct (800 to 1000 }}{}^{\text{o}}{\text{C)}}$$ The thermodynamic and transport behaviors of oxygen in solid nickel were fairly well described by a simple quasi-regular model and an interstitial diffusion model, respectively.