Spectroscopic Analysis of the Structure and Properties of Alkali Tellurite Glasses

Structural development of tellurite glasses with the addition of Li₂O and Na₂O has been studied using infrared, Raman, and X-ray photoelectron spectroscopies. The increase in intensity of the peak at 755 cm⁻¹ in the infrared spectra as compared to the peak at 620 cm ⁻¹ suggests the transformation of TeO₄ building units to TeO₃ pyramids with the addition of alkali oxide. Proposed structural change is further supported by the strong compositional dependence of the 755-cm⁻¹ peak in the Raman spectra as well as by the formation of a shoulder in the O 1 s peak of X-ray photoelectron spectra. In contrast to alkali silicate glasses, formation of nonbridging oxygens with the addition of alkali oxide is not observed.     

Carbide Formation and Growth Kinetics Enhanced by Tensile Stress and Elevated Temperature Intergranular Cracking in 2.25Cr-1.5W Heat-Resistant Steels

The carbide growth kinetics enhanced in grain interiors is mainly due to the increased diffusivity in the direction normal to the tensile stress. The accelerated kinetics at the grain boundaries normal to the tensile stress is due to the increased grain boundary energy and the widened grain boundary path producing the increased diffusivity in the direction normal to the tensile stress. A strong segregation behavior of impurities to the grain boundary carbide interfaces follows the enhanced grain boundary carbide growth kinetics.     

Study of magnetic entropy change in La0.65Sr0.35Cu0.1Mn0.9O3 complex perovskite

The magnetocaloric properties of new complex magnetic material La_0.65Sr_0.35Cu_0.1Mn_0.9O₃, suitable for the Ericsson cycle, have been investigated. For this material, the effect of Cu doping can be attributed to a combination of doping disorder, Cu-Mn super exchange interactions and a site-percolation mechanism, which suppress the metallic conduction and Curie temperature. The Curie temperature decreases to 355 K. The magnetocaloric study exposes a comparable value of the magnetic entropy change for La_0.65Sr_0.35Cu_0.1Mn_0.9O₃ sample, the value of the maximum entropy change, increases from 1.132 J/kgK to 3.11 J/kgK as magnetic field increases from 1 T to 4 T. A large relative cooling power (RCP) has been observed for La_0.65Sr_0.35Cu_0.1Mn_0.9O_3. As a result, the studied sample can be considered as potential material for magnetic refrigeration.     

Effects of potential and heat treatment on phase transition of alumina dielectric layer

The characteristics and growth behaviors of alumina dielectric layer formed by anodic oxidation were investigated. The aluminum oxide layer anodized at 400 V was predominantly amorphous alumina, but at the applied potentials more than 500 V, amorphous and crystalline γ-alumina were existed in anodic oxide layer and the ratio of γ-alumina increased with the increasing applied potential. During the heat treatment at 600^°C or higher temperature, amorphous alumina layer was transformed into the crystalline γ-alumina. The phase transition of anodic amorphous alumina into crystalline depends on anodic applied potentials and heat-treatment temperatures.     

Nanoparticle‐Enhanced Silver‐Nanowire Plasmonic Electrodes for High‐Performance Organic Optoelectronic Devices

Improved performance in plasmonic organic solar cells (OSCs) and organic light‐emitting diodes (OLEDs) via strong plasmon‐coupling effects generated by aligned silver nanowire (AgNW) transparent electrodes decorated with core–shell silver–silica nanoparticles (Ag@SiO₂NPs) is demonstrated. NP‐enhanced plasmonic AgNW (Ag@SiO₂NP–AgNW) electrodes enable substantially enhanced radiative emission and light absorption efficiency due to strong hybridized plasmon coupling between localized surface plasmons (LSPs) and propagating surface plasmon polaritons (SPPs) modes, which leads to improved device performance in organic optoelectronic devices (OODs). The discrete dipole approximation (DDA) calculation of the electric field verifies a strongly enhanced plasmon‐coupling effect caused by decorating core–shell Ag@SiO₂NPs onto the AgNWs. Notably, an electroluminescence efficiency of 25.33 cd A^?1 (at 3.2 V) and a power efficiency of 25.14 lm W^?1 (3.0 V) in OLEDs, as well as a power conversion efficiency (PCE) value of 9.19% in OSCs are achieved using hybrid Ag@SiO₂NP–AgNW films. These are the highest values reported to date for optoelectronic devices based on AgNW electrodes. This work provides a new design platform to fabricate high‐performance OODs, which can be further explored in various plasmonic and optoelectronic devices.     

Titanium implants and BMP-7 in bone: an experimental model in the rabbit

This study evaluates the effect of rhBMP-7/OP-1 on the osseointegration of commercially pure titanium implants in an experimental implant model in rabbits. Threaded titanium implants with two transverse parallel canals were inserted in the femur and tibia of rabbits. The canals were filled with, 10 g of BMP-7/collagen carrier, pure collagen carrier or were left empty as a control. The stiffness of the implant fixation was evaluated by Resonance Frequency Analysis (RFA) at baseline and four weeks postoperativly. Percentage of bone ingrowth in the canals was measured on microradiographs. Histomorphometry along the threaded part of the implants was performed on 15 m thin sections. The results from the RFA demonstrated a higher mean value for the BMP-7 treated implants in the tibia than the carrier treated implants but not compared to the control implants. The control implants in the tibia demonstrated more bone ingrowth in the upper canal than to the carrier or the BMP-7 treated implants. Apart from these differences there were no significant effects of BMP. In this study BMP-7 did not contribute to any substantially improved bone anchorage of titanium implants.     

Preparation of a sensor substrate using functionalized mesoporous silica on a gold film for surface plasmon resonance (SPR) spectroscopy

The use of surface plasmon resonance (SPR) spectroscopy has been applied to a wide variety of fields such as biosensors and surface analysis instruments. In general, a SPR substrate is prepared using self-assembled monolayer (SAM) method of organic molecules as receptor for the target on a layer of gold or silver. However, mesoporous inorganic materials such as SBA-15 have benefits as sensor substrate for SPR. Mesoporous silica has a large surface area which receptor molecule can be attached and has a rigid body which has an excellent stability in the extreme condition compared to organic sensing layer. We prepared an organic modified mesoporous silica and successfully immobilized it on a gold surface, in an attempt to use as a substrate for SPR spectroscopy. For the comparison of sensitivity of prepared substrate, Pt²⁺ detection was selected as a model system. Substrate prepared in this study exhibited the capability of selective sensing for Pt²⁺ ions.     

Eleutheroside E,an active compound from Eleutherococcus senticosus,regulates adipogenesis in 3T3-L1 cells

In this study, we investigated the anti-adipogenic effects of Eleutherococcus senticosus and its active compounds in vitro to examine new functions. We first analyzed the active compounds in E. senticosus growing in Korea using HPLC and found that the concentration of eleutheroside B and E was higher in stems and roots than in other plant parts. There were no significant (p<0.05) differences in eleutheroside concentration between plant ages. Anti-adipogenic effects of E. senticosus on lipid accumulation in 3T3-L1 cells were examined. Extracts of stems and roots more effectively inhibited lipid accumulation in 3T3-L1 cells than extracts of other plant parts. Eleutheroside E was responsible for the pharmacological anti-adipogenic effects via regulation of the mTOR pathway. This is the first report of an anti-adipogenic effect of E. senticosus and the active compound eleutheroside E.