Stability of AB5-type hydrogen storage alloys

In this paper, we deduced an empirical equation for predicting the stabilities of the hydrides of AB₅-type compounds with the consideration of the effects of geometrical factor and electric factor. The theoretical curves derived from this equation are in good agreement with the test results of La_1−xCa_xNi₅, Ml_1−xCa_xNi₅ and La_1−xCe_xNi₅ compounds. With this model, we can easily interpret the phenomenon that the initial partial substitution of R by Ca in R_1−xCa_xNi₅ (R is rare earth metal) compounds cause an increase of hydrogen desorption pressure to a maximum value, whereas in the range of larger Ca content x the hydrogen desorption pressure decreases with increasing x.     

顶层基本框架在模具CAD/CAM中的应用

通过总结目前2D－Layout在自顶向下设计中的不足，本文提出了基于参数化的3D－Layout顶层基本框架的设计思想。采用顶层基本框架作为自顶向下设计中的核心，能够很好地解决变形设计问题，提高了产品设计的效率与准确性。     

Comparison of corrosion-resistance and hydrogen permeation properties of Zn-Ni, Zn-Ni-Cd and Cd coatings on low-carbon steel

Zn-Ni-Cd alloy was electroplated from an alkaline sulfate bath under potentiostatic conditions. The corrosion and hydrogen permeation characteristics of Zn-Ni-Cd alloy coatings electrodeposited from alkaline bath were studied and compared with those of Cd and Zn-Ni coatings obtained using commercial baths. Zn-Ni-Cd alloy was electroplated from an alkaline sulfate bath under potentiostatic conditions. The corrosion potential of this Zn-Ni-Cd coating was −0.62 V vs. SCE, which is still negative potential compared to iron. The corrosion rate of Zn-Ni-Cd coated steel was 0.073 mm y⁻¹, which is estimated in a solution at a pH of 7. This value is much lower than the corrosion rate of Zn-Ni alloy (0.502 mm y⁻¹) and Cd (0.306 mm y⁻¹) coatings deposited from commercial baths. Zn-Ni-Cd alloys are also demonstrated to have superior hydrogen permeation inhibition properties compared to Cd and Zn-Ni coatings. Kinetic parameters of hydrogen permeation such as the transfer coefficient, α, the modified exchange current density, i₀^′, thickness dependent adsorption-absorption rate constant, k^″, recombination rate constant, k₃, surface hydrogen coverage, θ_s, were evaluated by applying a mathematical model to analyze experimental results.     

球磨对ZrO2（Y2O3）超细粉末性能的影响

以共沉淀法制备煅烧态ＺｒＯ２（Ｙ２Ｏ３）超细粉末为研究对象，研究了球磨对其物理和烧结性能的影响，结果表明，球磨虽可以有效地减小粉末的团聚尺寸，但对粉末一次颗粒尺寸的的影响不大，球磨可以显著增加团聚程度较严重的锻烧态粉末的比表面积，但对团聚程度较轻的粉末，其影响大：球磨还可显著减小粉末的晶粒尺寸，这与粉末在球磨过程中发生了相变有关。此外，对团聚较严重的粉末，球磨可改善其烧结性能，但对团聚程度较轻的粉     

9SiCr钢中的筐篮编结状马氏体及其性能

将9SiCr钢的粒状原始组织改变为片状,再经830℃淬火后,其马氏体形态为筐篮编结状。而传统工艺所获得的马氏体形态为针状.这种筐篮编结状马氏体是9SiCr钢中一种崭新的组织形态,其精细结构为平行成束的板条。亚结构为高密度缠结位错.它有良好的综合机械性能,强韧性高,耐磨性高。     

Gr（C）纤维增强镁基复合材料的界面结构

采用真空—压力浸渗工艺制备Ｇｒ（Ｃ）／Ｍｇ复合材料，Ｇｒ／Ｍｇ材料界面上无化学反应迹象，有析出物γ相（Ｍｇ１７Ａｌ１２），该析出物形状、大小与制备工艺条件，主要是纤维预制件温度有关。Ｃ／Ｍｇ复合材料界面Ａｌ含量较基体高出２倍多，文中分析了可能的原因     

The establishment of the statistical-thermodynamic model of D81-structure and its application to α-Nb5Si3

A statistical-thermodynamic model for binary nonstoichiometric A₅B₃ with D8₁-structure has been established on the basis of the grand canonical ensemble. In the model the average chemical potentials according to the composition and a new extra equation as a boundary condition are proposed for more accuracy and free experimental data calculations. The model can be used in any A₅B₃ type compounds with D8₁ structure. The establishment method of the statistical-thermodynamic model can be extended to other complicated structures. We apply the statistical-thermodynamic model to α-Nb₅Si₃ and the parameters used in the model are obtained from the first-principles' calculations. From these parameters the expression for the point defect concentrations as a function of compositions and temperatures is obtained by numeral calculations. The constitutional defects and thermal defects in α-Nb₅Si₃ are discussed.     

T形焊缝未焊透宽度的测定

在制作港口起重机械和森工机械中，采用了制作容易、省工省料的T形焊缝，焊缝中允许存在未焊透，但为保证机械质量和安全性，对未焊透宽度有一定限制，这就要求对焊缝未焊透宽度和位置进行测量。笔者根据未焊透的特点以及普通斜探头和直探头的声场结构，采用未焊透端线定位法和两端线同时回波声程定位法对T形焊缝的内部和根部未焊透进行检测，经超声波和焊缝低倍宏观检验相比较，前者检测方便，准确度高，重复性好。     

STUDY ON THE STABILITY OF T’PHASE IN THE Al-Zn-Cu TERNARY SYSTEM

The phase constitutes and phase compositions in the eight alloys designed with dif-ferent compositions of Al--Zn--Cu system have been determined after the homogenoustreatment and then equilibrium cooling to 20℃ by use of optical microscope, electronprobe microanalysis and X--ray diffraction. It has been found that there existed the T'phase in the seven alloys. Consequently, it was testified that the T' phase was stableat room temperature. At the same time, the phase relationship was not locally rightfor the isothermal section of 20℃ of Al--Zn--Cu system of the ASM published in 1997.     

激光熔覆TiC增强FeAl金属间化合物基复合材料涂层磨损性研究

利用激光熔覆技术在1Cr18Ni9Ti奥氏体不锈钢表面制得了以TiC为增强相、以FeAl 金属间化合物为基体的耐磨复合材料涂层，研究了激光熔覆。FiC／FeAl复合材料涂层在干滑动磨损条件下的耐磨性能及磨损机制。结果表明：随着载荷和滑动速率的增加，TiC／FeAl金属间化合物基复合材料涂层的磨损速率增加，其磨损机制随着载荷的增加逐渐由磨料磨损向粘着磨损转变；激光熔覆层中TiC体积分数的增加，一方面提高了涂层的磨料磨损抗力，另一方面降低了熔覆层表面与对磨材料之间的粘着倾向，提高了TiC／FeAl涂层的滑动磨损性能。激光熔覆TiC/FeAl金属间化合物基复合材料涂层具有优异的耐磨性能并随TiC体积分数的增加而提高。