Some properties of boronized layers on steels with direct diode laser

Boronized layer on steel is known to be formed by thermal diffusion of boron into the surface of steel improving corrosion-erosion resistant properties. Boronizing is carried out at temperatures ranging from 800 °C to 1050 °C and takes from one to several hours. There is one problem in this process, however, that the structure and properties of the base material are influenced considerably by the high temperature and long time of treatment. In order to avoid the aforementioned drawbacks of pack boronizing and laser-assisted boronizing, a better way is to activate the pack boronizing media and the workpiece with a high density power. The laser boronizing processes do not change the properties of the base material. In this study, the effect of laser characteristics was examined on the laser boronizing of carbon steel. After laser boronizing, the microstructure of the boride layer was analysed with an optical microscope and X-ray diffractometer (XRD). The mechanical properties of borided layer are evaluated using Vickers hardness tester and sand erosion tester. Results showed that the boride layer was composed of FeB and Fe₂B with thickness ranging 200-300 μm. The laser boronizing process did not change the properties of the base material.     

In vivo pressure estimation using subharmonic contrast microbubble signals: proof of concept

Changes in ambient pressure affects the reflectivity of ultrasound contrast microbubbles leading to an excellent correlation between subharmonic signals and hydrostatic pressure. The aortas of two dogs were scanned with an experimental pulse-echo system to validate in vivo pressure estimation based on subharmonic microbubble signals. Results matched well with instantaneous pressure measurements (from 20-60 mmHg) obtained simultaneously with a pressure catheter (root mean square errors <27%).     

Fast microwave detection system for coherent synchrotron radiation study at KEK: Accelerator test facility

A fast room temperature microwave detection system based on the Schottky Barrier-diode detector was created at the KEK ATF (Accelerator Test Facility). It was tested using Coherent Synchrotron Radiation (CSR) generated by the 1.28 GeV electron beam in the damping ring. The speed performance of the detection system was checked by observing the CSR from a multi-bunch (2.8 ns bunch separation time) beam. The theoretical estimations of CSR power yield from an edge of bending magnet as well as new injection tuning method are presented. A very high sensitivity of CSR power yield to the longitudinal electron distribution in a bunch is discussed.     

High-intensity multi-bunch beam generation by a photo-cathode RF gun

A multi-bunch photo-cathode RF gun system has been developed as an electron source for the production of intense quasi-monochromatic X-rays based on inverse Compton scattering. The desired multi-bunch beam is 100 bunches/pulse with a total charge of 500 nC and a bunch spacing of 2.8 ns. We modified the gun cavity of a ‘BNL-type IV’ RF gun to allow a CsTe cathode plug in the end plate. The system uses a four-dipole chicane beam line to allow the injection of laser light normal to the cathode surface. We compensate the gun cavity beam loading caused by the high-intensity multi-bunch electron beam by injecting the laser pulse before RF power has filled the cavity. We have achieved a total intensity of 220 nC in 100 bunches with a bunch-to-bunch energy spread under 1.3% (peak-to-peak). This paper concentrates on experiments to generate the high-intensity multi-bunch beam with compensation of the bunch-to-bunch energy spread due to heavy beam loading.     

Indoline-based donor molecule for efficient co-evaporated organic photovoltaics

We demonstrated the use of an asymmetrical donor–acceptor-type indoline dye—D131, developed for dye-sensitized solar cells, as an electron donor and fullerene C₇₀ as an electron acceptor for thermal co-evaporated bulk-heterojunction organic solar cells (OSCs). In spite of the presence of intermolecular hydrogen bonds among D131 molecules, they can be thermally evaporated in high vacuum at a relatively low temperature of 220 °C. The blend ratio and thickness of the active layer of D131/C₇₀ blend films in OSCs were optimized to achieve a maximum power-conversion efficiency of 4.5% with a short-circuit current of 9.1 mA cm^?2, an open-circuit voltage of 0.89 V, and a fill factor of 0.56 under AM 1.5G solar illumination (100 mW cm^?2), which is the best value reported so far for OSCs based on indoline-based donor materials.     

Dipyrenylpyridines for electron-transporting materials in organic light emitting devices and their structural effect on electron injection from LiF/Al cathode

3,5-Dipyrenylpyridine (PY1) and 2,6-dipyrenylpyridine (PY2) were synthesized to achieve not only efficient electron injection from cathode but also high electron mobility. The both of compounds showed much higher electron mobilities than that of Alq₃, and have a similar ionization potential and electron affinity. However, the barrier height of electron injection from cathode to PY1 in an organic light emitting device was much smaller than that to PY2, probably due to the steric hindrance to the central pyridine group. These results suggest that the chemical affinity of electron-transporting materials with cathode is more important than their own electron affinity to improve the electron injection.     

Tensile and impact properties of fully green composites reinforced with mercerized ramie fibers

The purpose of this study is to create a natural fiber-reinforced fully green composite with excellent toughness. By treating ramie plied yarns in a high concentration alkali solution, the reinforcements were mercerized. Results of tensile tests showed that unidirectional composites using mercerized ramie yarns exhibited two to three times larger fracture strain, without a marked decrease in strength, than composites using untreated yarns. In addition, mercerization for the ramie yarns brings a better interfacial strength to the composites. Laminated composites using mercerized ramie yarns also showed approximately twice larger impact energy than composites using untreated yarns. Thus, mercerization for natural fibers is expected for application to mechanical materials requiring a high toughness.     

Postbuckling behaviour of stainless steel (SUS304) columns under loading-unloading cycles

Based on the equilibrium configuration paths, this study investigates the postbuckling behaviour, including the shape recovery capability, of stainless steel (SUS304) columns after a complete loading-unloading cycle. Experiments were conducted and later numerical simulation was carried out in order to analyze the observed buckling and postbuckling behaviour. Large deflection analysis is necessary for slender columns. Moreover, comparison of the experimental critical load with analytical predictions verifies the fact that physical nonlinearity should be taken into account to analyze the column’s buckling behaviour comprehensively. Thus, based on large deflection theory as well as the nonlinear stress-strain relations, the load-deformation curves of the columns during a complete loading-unloading cycle have been predicted by using the finite element modelling (FEM) code ANSYS.Precise and quantitative analyses of the results verify the fact that the material’s stress-strain properties, both in tension and compression, attribute to the column’s buckling behaviour.     

Quantitative acoustic emission source characterization of microcrackings in steel

Acoustic emission (AE) source wave analysis is a new NDE technique for the investigation of dynamic fracture process. We applied this technique to the quantitative characterization of crack sources in ductile fracture. Using two samples of ASTM A533B steel with different sulfur content, acoustic emissions during fracture toughness tests were detected, located, and analyzed. The detected AE signals were classified into two types according to the analyzed source waveforms. One was a signal due to microcracking at the MnS inclusion, and the other was a signal due to coalescence of the voids. The results of the source wave analysis showed that microcracking at the inclusions was due to Mode I type tension crack with sizes of 10–30 µm, and the coalescence of the voids was due to tension shear mixed cracks with sizes of 60–100 µm. It was confirmed that this technique is very effective for the quantitative evaluation of microcrackings and for the detection of the nucleation and growth of cracks.     

Acute ingestion of yerba mate infusion (Ilex paraguariensis) inhibits plasma and lipoprotein oxidation

Yerba mate extract (Ilex paraguariensis) is a source of phenolic compounds that possesses in vitro antioxidant activities and may contribute to a reduction in the risk of cardiovascular disease. In this study we examined the acute effects of the consumption of mate infusion on ex vivo plasma and low-density lipoprotein (LDL) oxidation, plasma antioxidant capacity, and platelet aggregation. Twelve healthy fasted subjects ingested 500 mL of mate infusion and blood samples were collected before and 1 h after mate intake. Lipid peroxidation of plasma and LDL was monitored by the measurement of cholesteryl-ester hydroperoxides (CE-OOH) and cholesterol oxides. The plasma antioxidant capacity was measured as ferric-reducing antioxidant potential (FRAP). Platelet aggregation was evaluated in platelet-rich plasma stimulated with adenosine diphosphate and coagulation was tested in platelet-poor plasma. Ingestion of mate infusion diminished the ex vivo oxidizability of both plasma and LDL particles. After mate intake, the CE-OOH levels were around 50% lower in plasma oxidized with copper or 2,2′-azobis[2-amidine-propane-hydrochloride] (AAPH) and the lag time to plasma oxidation increased 2-fold (P < 0.05). Copper- and AAPH-induced LDL peroxidation were also inhibited by around 50% and 20%, respectively, after mate consumption (P < 0.05). The levels of various oxysterols were significantly reduced in oxidized-plasma and LDL (P < 0.05) and FRAP increased by 7.7% after mate intake (P < 0.01). However, mate consumption did not inhibit platelet aggregation or blood coagulation. In summary, intake of yerba mate infusion improved the antioxidant capacity and the resistance of plasma and LDL particles to ex vivo lipid peroxidation.