Polyaniline–13X zeolite composite‐supported platinum electrocatalysts for direct methanol fuel cell applications

We successfully synthesized 13X zeolite using a hydrothermal method. Then, composites of polyaniline (PANI) with 13X zeolite and PANI–13X with platinum were prepared by chemical oxidative polymerization and chemical reduction, respectively. Field emission scanning electron microscopy, X‐ray diffraction, Raman spectroscopy and Brunauer–Emmett–Teller techniques were used to characterize the PANI–Pt and PANI–Pt–13X composites. Further, the electrocatalytic activity towards methanol oxidation of the synthesized catalysts was explored using cyclic voltammetry in 1 mol L^?1 CH₃OH + 0.5 mol L^?1 H₂SO₄ solution. From the obtained results, PANI–Pt–13X shows superior performance compared to PANI–Pt towards methanol oxidation and electrical conductivity. Hence, the 13X zeolite‐incorporated PANI–Pt composite could be an efficient catalyst for direct methanol fuel cell applications. © 2019 Society of Chemical Industry     

Green hydroelectrical energy source based on water dissociation by nanoporous ferrite

Dissociation of water molecule occurs on octahedrally coordinated unsaturated suface cations and oxygen vacancies created by lithium substitution in magnesium ferrite. Lower synthesis temperature of ferrite has generated nanopores in microstructure. Dissociated hydronium and hydroxyl ions are transported through surface and capillary diffusion in porous ferrite network towards attached Zn and Ag electrodes. Water molecule dissociation ability of nanoporous ferrite has been exploited to develop a green electrical energy cell, which is a combination of material science and electrode chemistry. The innovated cell has been nomenclatured as hydroelectric cell (HEC). When HEC is partially dipped in deionized water, spontaneously hydroxide and hydronium ions are produced by water molecule dissociation. Hydronium ions trapped in nanopores develop enough electric field that further dissociates physisorbed water molecules. Thereby, the process of water molecule dissociation is accelerated in a bigger way to increase ionic current in the cell. Oxidation of Zn electrode by hydroxide ion and reduction of H₃O⁺ at Ag electrode develop voltage and electric current in the cell. The HEC cell of a 17 cm² area is able to generate a short circuit current of 82 mA and 920 mV emf with a maximum output power of 74 mW, which is three order higher than reported output power 1.4 μW/cm² produced by water in cement matrix. Hydroelectric cell performance is repetitive, stable and possesses potential to replace traditional ways of generating renewable energy in terms of cost and safety. Copyright © 2016 John Wiley & Sons, Ltd.     

A monolithic finite-element formulation for magnetohydrodynamics

This work develops a new monolithic strategy for magnetohydrodynamics based on a continuous velocity–pressure formulation. The magnetic field is interpolated in the same way as the velocity field, and the entire formulation is within a nodal finite-element framework. The velocity and pressure interpolations are chosen so that they satisfy the Babuska–Brezzi (BB) conditions. In most of the existing formulations, a stabilized formulation is used that requires a stabilization term, and some associated mesh-dependent parameters that need to be adjusted. In contrast, no such parameters need to be adjusted in the current formulation, making it more user-friendly and robust. Both transient and steady-state formulations are developed for two- and three-dimensional geometries. An exact linearization of the monolithic strategy ensures that rapid (quadratic) convergence is achieved within each time (or load) step, while the stable nature of the interpolations used ensures that no instabilities arise in the solution. An existing analytical solution is corrected. The coarse mesh accuracy is shown to be better compared with other existing strategies in several benchmark problems, showing that the developed formulation is both robust and efficient.     

Phytochemical Constituents,Attenuated Total Reflectance Fourier Transform Infrared Analysis and Antimicrobial Activity of Four Plant Leaves Used for Preparing Rice Beer in Assam,India

Phytochemicals content and antimicrobial activity of Artocarpus heterophyllus, Cyclosorus extensa, Oldendia corymbosa, and Alpinia malaccensis were investigated. Maximum alkaloids and terpenoids were found in A. heterophyllus; tannins and saponins in C. extensa; flavonoids, polyphenols, and phytosterols in O. corymbosa and anthraquinone, glycosides, and anthocyaninin A. malaccensis. Aqueous, methanolic, ethyl acetate, and hexane extracts were prepared from all the leaves. Attenuated total reflectance Fourier transform infrared spectrophotometric (ATR-FTIR) analysis revealed that alkanes and alkyl halides were prevalent in all the extracts and the ethyl acetate extracts contained comparatively higher number of functional groups, which were also more effective against Candida albicans, Escherichia coli, and Staphylococcus aureus. The minimum inhibitory concentration values of A. malaccensis against the tested pathogens were found to be lesser than the other species.     

Viscoelastic properties of borax loaded CMC‐g‐cl‐poly(AAm) hydrogel composites and their boron nutrient release behavior

Borax (Na₂B₄O₇, 10.5% Boron) loaded CMC‐g‐cl‐poly(AAm) hydrogel composites were prepared by in situ grafting of acrylamide on to sodium carboxymethyl cellulose in the presence of borax by free radical polymerization technique to develop slow boron (B) delivery device. The composition, morphology, and mechanical properties of synthesized composites were studied by X‐ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, texture analyser, and dynamic shear rheometer. Characterization revealed formation of borate ion ( ) from borax during polymerization reaction leading to extensive crosslinking of cellulosic chains and generation of mechanically strong composite hydrogels. Dynamic release of from the synthesized composites hydrogels followed Fickian diffusion mechanism and composites with high mechanical strength resulted in slow release of B. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43969.     

Occurrence and Source Apportionment of Polycyclic Aromatic Hydrocarbons in Urban Residential Soils from National Capital Region,Uttar Pradesh,India

This study aims to investigate the level of priority polycyclic aromatic hydrocarbons (PAHs) and identification of their potential sources in residential soils. During the study, a total 36 soil samples collected from twelve residential locations at Sahibabad-Ghaziabad area of western Uttar Pradesh, India, a constituted part of the National Capital Region of India. Samples extracted using ultrasonication, cleaned with silica and analyzed by diode array detector–high-performance liquid chromatography using acetonitrile/water as mobile phase. The 25th and 75th percentile concentration of ∑PAHs was 264 μg kg^?1 and 584 μg kg^?1, respectively, with mean and median of 445 μg kg^?1 and 421 μg kg^?1. The detection frequency of PAHs in all samples was lower for low molecular weight PAHs (19%) than high molecular weight PAHs (81%). The concentration of seven probable carcinogenic PAHs accounted for 67% of the ∑PAHs. PAHs toxicity potential as benzo(a)pyrene toxicity equivalent ranged between 2.52–253 μg BaP_TEQ kg^?1. Composition profile of PAHs with different aromatic rings and selected diagnostic molecular ratios suggested the local pyrogenic sources of PAHs from vehicular emissions, diesel engines, biomass combustion, gasoline, and coal combustions.