Distributed channel assignment strategies using coexistenceetiquettes for land based radio environment

The performance of two distributed channel assignment algorithms which use coexistence etiquettes for point to point links are considered by the authors. It has been found that selecting channels prior to transmission at the transmitter as opposed to the receiver, supports greater offered traffic with the additional advantage of a less complex protocol     

Optimal PV system dimensioning with obstructed solar radiation

This paper describes an analytical methodology for the optimised design of stand-alone photovoltaic (PV) systems installed at locations where the solar radiation is considerably shortened by obstacles, i.e. at the bottom of a gorge. A method for the computation of the real available solar energy incident on the PV panel is proposed, based on easily conducted measurements. The optimum tilt of the PV array, under such conditions, is obtained and a dimensioning procedure provides the optimal size of the PV-array/storage. The resulting system is tested by a verification routine. A case study, employing the complete algorithm proposed, is illustrated.     

Thermally insulating behaviour of single and multiple layers of textiles under wind assault

One or more layers of textiles can provide a thermal resistance between the human body and its environment, and so help maintain the body in a thermally comfortable state. The effect of wind on and its penetration through such thermal cladding is examined experimentally.     

Comparison between normal and reverse thin crystalline silicon solar cells

The newly developed ingot growing techniques, as the three-grain and the columnar multigrain ingot processes, are now offering the possibility of slicing thinner wafers (≤ 100 μm). In this paper we present the results obtained on p type large area (≥ 100 cm²) and 100 μm thick wafers by using both conventional and reverse cell manufacturing technologies.The conventional cells are provided with aluminium or boron BSF plus screen-printed silver mirror or a silver-aluminium net; the reverse cells have a FSF and the deep back junction completely covered by a screen-printed or CVD silver layer.The constructing parameters have been chosen on the base of one and two dimensions modeling and both raw material and devices have been completely characterized.This work shows that very thin wafers do not introduce serious problems for the conventional manufacturing of solar cells. The efficiencies of the normal and of the reverse cells are found to be comparable and are of the same order than those of thicker cells, however at a significant lower cost. The main obtained result has to be related to the demonstration of a cell manufacturing feasibility starting from very thin wafers.     

The application of transmission-line modelling to the simulation ofan induction motor drive

The simulation of a complete induction motor drive is presented. The entire network is modelled using the transmission-line modelling (TLM) technique. The network is split into three sections which are solved independently and are joined together by link transmission-line models. Advantages of this approach are the explicit nature of the algorithm which remains unaltered irrespective of the network topology, unconditional stability, and straightforward modelling of switching elements. Results are presented for a complete drive which illustrate the capabilities and flexibility of the simulation technique     

Alignment of fluorescent molecules vapour-deposited on to highly oriented PTFE substrates

The alignment of six fluorescent materials (p-terphenyl, p-quaterphenyl, p-quinquephenyl, diphenylstilbene, 1,4-bis(2-methylstyryl)benzene, and 1,4-bis-2-(5-phenyloxazolyl)benzene) grown from the vapour phase on to friction-deposited, highly oriented poly(tetrafluoroethylene) (PTFE) films was studied. The dichroic ratio of the fluorescent films produced was determined by polarized spectroscopic fluorescence measurements, and the crystallographic orientation of these materials was determined by transmission electron microscopy. The measured dichroic ratios ranged from 1.7 for diphenylstilbene to 5.0 for the p-quaterphenyl film. Electron diffraction patterns revealed that five of the fluorescent materials grew epitaxially on the single crystal-like PTFE films, the fluorescent crystals adopting particular orientations with respect to the crystallographic planes of PTFE. On the other hand, crystals of 1,4-bis-2-(5-phenyloxazolyl) benzene aligned in a fibre pattern, apparently by a grapho-epitaxial mechanism.     

Generalized model of the quantization error-a unified approach

The effective resolution of AD converters is a crucial quantization quality parameter in modern instrumentation. A usual theoretical assumption about the quantized (training) signal is that it is a pure sine wave with a “zero” offset. This means that either the average value of the sine wave is equal to one of the threshold levels (quantizer without dead zone) or that it lies exactly in the middle of them (rounding quantizer). In the measurement technique this assumption is hardly fulfilled, and that is why we meet something intermediate between the above-mentioned hypothetical situations. Here we generalize the known results for “zero” offset to the case of unknown offset. A general problem of an arbitrary random offset distribution is considered first. Two important practical cases are then analyzed. The first one is an unknown and nonrandom offset (one-point distribution). The second one is a case of a uniform distribution of the offset (effect of dithering on quantizer input). In particular, the expected values and variances are derived and analyzed versus the offset and the number of quantizing levels. The results obtained are applied to the effective resolution measurement     

On coordinating warehouse sizing, leasing and inventory policy

Organizations often fulfil their storage needs by supplementing their own warehouse with leased space, a scenario modeled here under the assumption of constant product demand. Closed-form formulae are obtained for the decision variables of interest, namely, the replenishment lot size and the warehouse size, as well as the amount of space to lease. Cost savings due to leasing are shown to have an upper bound of approximately 29% when the optimal warehouse capacity can be installed without restrictions (such as a budgetary constraint). A numerical example further indicates that leasing is significantly more beneficial when the warehouse size is tightly constrained, and that total costs are robust with respect to demand fluctuations.     

Flow-dependent platelet behaviour in blood—material interactions

Platelet activation and adhesion are important parameters characterizing blood compatibility of biomaterials. A platelet transport theory based on convection diffusion, which describes the influence of wall shear rate, platelet concentration, axial position, hematocrit and red cell size, was originally proposed by Turitto and Baumgartner and later expanded by Aarts. This theory was applied in an in vitro perfusion system for three different materials with wall shear rates between 100s^-1 and 4300 s^-1 in order to cover the regions of diffusion controlled, reaction controlled and intermediate platelet adherence. Platelet diffusivity and platelet vessel wall surface reactivity were determined for these cases and the constants m and n were calculated using the relation between platelet diffusivity and shear rate as expressed by the following power law function: D _w=m*y ⁿ _w.