Quantification and genotyping of Cryptosporidium spp. in river water by quenching probe PCR and denaturing gradient gel electrophoresis.

A new detection method was developed for the simultaneous quantification and genotyping of Cryptosporidium spp. in river water. Several modifications made to the US EPA Method 1623 enabled high and stable recovery of Cryptosporidium from 40 L of river water (geometric mean = 35%, standard deviation = 8.7%). Quenching probe PCR (QProbe PCR) was used to quantify the 18S rRNA gene of Cryptosporidium spp. This method could successfully detect single oocysts in a sample, and the lower quantitation limit was as low as 2.5 oocysts/sample. In addition, denaturing gradient gel electrophoresis (DGGE) followed by DNA sequencing was used to identify the genotypes. These methods were applied to detect Cryptosporidium spp. in the Koyama River, Japan. The positive ratio was 69% (11/16) with the maximum concentration of 59 oocysts/100 L. Seven genotypes including two novel ones were identified. These results showed that this detection method could provide valuable information on Cryptosporidium in river water, both in the concentration and in the genotypes, which is essential for the precise assessment of waterborne risk to human health.     

A double-layer current conduction model for high-κ gate dielectric materials with interfacial oxide or silicate layer

The current-voltage (I-V) characteristics of metal-oxide-semiconductor (MOS) structures with hafnium oxide as the gate dielectric film were studied. Sharp shifts from a low-voltage ohmic regime to a tunneling conduction were observed in the high-voltage range. The paper demonstrates that this behavior can be described very well with a double-layer dielectric model. Excellent fittings of the experimental curves were obtained and the related key structural and physical parameters were obtained. The model fitting further suggests the optimal annealing conditions for preparing the hafnium oxide films.     

The analysis of solvation in ionic liquids and organic solvents using the Abraham linear free energy relationship

The contentions made in an earlier paper [J Chem Technol Biotechnol 80 : 133–137 (2005)] that the coefficients of the Abraham solvation equation do not provide meaningful information on the molecular properties of ionic liquid solvents is refuted. The objections noted in the earlier paper disappear when the solvation equation model is correctly applied to the experimental data. It is further shown that the coefficients of the Abraham solvation equations can be used to characterize ionic liquids and can be used to select solvents for the solubility of gaseous solutes. Copyright © 2006 Society of Chemical Industry     

A Practical Method to Derive Sample Temperature during Nonisothermal Coupled Thermogravimetry Analysis and Differential Scanning Calorimetry Experiments

Nonisothermal thermogravimetry differential scanning calorimetry (TG‐DSC) mounting is intensively used for the determination of kinetic parameters and reaction heat along the chemical transformation of a solid. Nevertheless, when tests are performed with heating rates as high as those encountered in industrial processes, e.g., several tens of K min^–1, there is great uncertainty in the knowledge of the exact sample temperature. In this work, a method to derive a simple mathematical expression is proposed and fully described in order to calculate the real sample temperature throughout a temperature‐ramped test on a commercial apparatus. The furnace temperature and the heat flow signals were used, together with the crucible specific heat and the heating rate. A number of validation tests were performed to derive similar reaction rates for a reference. First‐order kinetic reactions were presented and reconciled over a large range of heating rates from 3 to 50 K min^–1.     

Ten-user truly asynchronous gigabit OCDMA transmission experiment with a 511-chip SSFBG en/decoder

A ten-user truly asynchronous gigabit coherent-optical-code-division-multiple-access (OCDMA) transmission was experimentally demonstrated without using any timing coordination. The enabling technologies are a record-length 511-chip superstructured-fiber-Bragg-grating (SSFBG) en/decoder and a supercontinuum (SC)-based optical-thresholding technique to significantly suppress the signal interference beat noise as well as the multiple-access-interference (MAI) noise.     

Specular reflection of thermal neutrons from Gd-containing layers and optimization of antireflective underlayers for polarizing coatings

A detailed analysis of specular neutron reflection from an absorbing medium is given. The experimental studies revealed that oxidation and roughness of the surface are the main factors that determine the neutron reflectivity of Gd-containing layers. It is concluded that the empirical approach used at present does not guarantee optimization of underlayer parameters (composition and thickness) and technological regimes. An algorithm of optimization is proposed, in which account is taken of the substrate potential, the dependence of the underlayer potential on the thermal neutron wavelength, the polarizing coating imperfections that enhance reflection of neutrons with the undesired spin. The antireflective TiZrGd underlayer for CoFe/TiZr supermirrors produced at the magnetron facility DIOGEN (PNPI, Gatchina) is optimized.     

Floc size distribution in a stirred suspension.

This paper focuses on the distribution of alumino-humic flocs found in a stirred suspension. Distributions were scaled using the transformation u = d/dL in which d is floc diameter and dL its arithmetic mean value and fitted by a gamma distribution. Flocs were treated as monofractal with solids mass concentration specified by C = A'rhos (d/do)D-3 in which A' is a packing coefficient, rhos the density of the floc solids, D the fractal dimension and do a reference size. It was shown that the overall solids concentration (M) complies with the dependence M proportional to NA'dDL-S(D) in which N is the number of flocs per unit volume and S(D) a distribution moment. Initial estimates of A' and D were obtained from analysis of floc sedimentation behaviour. From knowledge of the base parameters, the calculated value of M did not match the measured M and varied with shear. This was attributed to a kinematic influence on C over and beyond changes associated with the response of dL to shear. Issues of self-similarity were examined and it was concluded that distributions did not display strict self-similarity. Data are provided on the size distribution found in the flocculators of a treatment works at full scale.     

Characteristics of particle-associated PAHs in a first flush of a highway runoff.

Runoff monitoring of six rainfall events was carried out in a highway, Winterthur, Switzerland focusing on first flush (runoff volume up to 2.88 mm). Six runoff events were used to investigate the characteristics of particle-associated PAHs in first flush. The fine fraction (< 45 microm) had a relatively higher contribution than the coarse fraction. A significant contribution of the coarse fraction was observed at some periods when the runoff flow rapidly increased. Fluctuation of PAH content during a runoff event was significant in the coarse fraction and, in contrast, the PAH content in the fine fraction was less fluctuating. The weighted average PAH content in each event ranged from 17 to 62 microg/g in total SS, from 23 to 54 microg/g in the fine fraction and from 16 to 84 microg/g in the coarse fraction. The loading of particle-associated PAHs from the first flush of highway runoff ranged from 0.06 to 0.22 g/ha in a total of 12 PAH species.     

The characteristics and measuring technique of refractory dissolved organic substances in urban runoff.

It is considered that refractory dissolved organic substances have caused an increase in the COD concentration in Lake Biwa in recent years. We investigated the organic matter in the first flush of stormwater runoff from a road in the watershed area of the lake, and studied the possibility of improvement in the water environment from that aspect. After percolating the stormwater through soil, we analyzed organic substances fractionated by using GPC-TC. And we examined the effect of removal of organic substances by comparing the peak height before and after percolation. In the result of the experiments, we found that soil infiltration reduced the refractory dissolved organic substance and we successfully designed a system for a simple and easy experimental facility to treat urban runoff.