Fast Envelope Detection for Thinned Display of Finely Digitized Ultrasound Scans

In ultrasound tissue characterization, the backscattered RF signal is finely digitized. The signal envelope is displayed in a version thinned 1-8. Three implementations of Hilbert-transform envelope detection with thinning were timed. An array processor speeds up DFT implementation by a factor of 2.5, but convolution implementation is even faster.     

Development and application of the Fraunhofer-diffraction method for measurements of plasma density fluctuations using infrared lasers

This paper is concerned with systematic developments of the Fraunhofer-diffraction method for studies of plasma density fluctuations in high-temperature plasmas using infrared lasers, namely (i) development of the general theory of the Fraunhofer-diffraction method, (ii) measurements of fluctuations propagating in an azimuthal direction, (iii) measurements of fluctuation intensities, and (iv) application in measurements on high-temperature plasmas.     

GOX-functionalized nanodiamond films for electrochemical biosensor

The importance of nanodiamond in biological and technological applications has been recognized recently, and applied in drug delivery, biochip, sensors and biosensors. Under this investigation, nanodiamond (ND) and nitrogen doped nanodiamond (NND) were deposited on n-type silicon films, and later functionalized with enzyme Glucose oxidase (GOX). The GOX functionalized doped and undoped ND films were characterized using combination of several techniques; i.e. FTIR spectroscopy, Raman spectroscopy, atomic force microscopy (AFM) and electrochemical techniques. ND/GOX and NND/GOX thin films on n-type silicon have been found to provide sensitive glucose sensor. GOX has been chosen as a model enzyme system to functionalize with ND at molecular level to understand the glucose biosensor.     

Suppression of the zero-order diffracted beam from a pixelated spatial light modulator by phase compression

Phase compression is used to suppress the on-axis zero-order diffracted (ZOD) beam from a pixelated phase-only spatial light modulator (SLM) by a simple modification to the computer generated hologram (CGH) loaded onto the SLM. After CGH design, the phase of each SLM element is identically compressed by multiplying by a constant scale factor and rotated on the complex unit-circle to produce a cancellation beam that destructively interferes with the ZOD beam. Experiments achieved a factor of 3 reduction of the ZOD beam using two different liquid-crystal SLMs. Numerical simulation analyzed the reconstructed image quality and diffraction efficiency versus degree of phase compression and showed that phase compression resulted in little image degradation or power loss.     

Phase transformations in Ni + Al and Ni + Al + Cr mixtures during mechanochemical synthesis and subsequent heating

Mechanochemical processing of elemental mixtures with the compositions Ni₇₅Al₂₅, Ni₇₀Al₂₅Cr₅, and Ni₇₅Al₂₀Cr₅ (5 at % Cr in the mixtures instead of the equivalent amount of Ni or Al) leads to the formation of nanocrystalline nickel-based solid solutions (crystallite size in the range ? 7?C12 nm). Comparison of experimentally determined lattice parameters of the solid solutions with Vegard??s law values and with the lattice parameters evaluated using the Bozzolo-Ferrante rule, which takes into account the bulk moduli of constituent elements, suggests that the atoms in the solid solutions are bonded more strongly. Heating the synthesized ternary solid solutions in a calorimeter to 1000°C leads to the formation of an ordered ?á?-phase (L1₂). Analysis of the relative intensity ratio of superlattice and fundamental reflections indicates that the Cr atoms always reside in the Al sublattice, independent of the composition of the starting mixture. When 5 at % Cr is incorporated instead of Ni, the chromium atoms force out aluminum from the Al sublattice, and the Ni deficiency in the Ni sublattice is compensated by the Al atoms. The ordered phases remain nanocrystalline (crystallite size in the range ? 40?C70 nm).     

Modeling Continuous Powder Mixing by Means of the Theory of Markov Chains

This article demonstrates the efficiency of the application of the theory of Markov chains as a tool to model and simulate continuous powder mixing to aid in better design of such equipment. Markov chain models allow calculating practically all parameters of the process necessary for its characterization, and in particular those related to particle residence time distribution (RTD). Some numerical examples from the model, which are important for better understanding the process, are also included. It is shown that the main factor defining the efficiency of continuous mixing, through the variance reduction ratio (VRR), is the ratio of the mean residence time and the period of inflows fluctuation, rather than the variance of the RTD. Also, the influence of the dimensions of the mixer outlet on the mean residence time, and in turn on the VRR, is examined as another way of improving the design.     

Electrospun bioactive nanocomposite scaffolds of polycaprolactone and nanohydroxyapatite for bone tissue engineering

Nanocomposite scaffolds based on nanofibrous poly(epsilon-caprolactone) (PCL) and nanohydroxyapatite (nanoHA) with different compositions (wt%) were prepared by electrostatic co-spinning to mimic the nano-features of the natural extracellular matrix (ECM). NanoHA was found to be well dispersed in polymers up to the addition of 20 wt%, after ultrasonication. The composite scaffolds were characterized for structure and morphology using XRD, EDX, SEM, and DSC. The scaffolds have a porous nanofibrous morphology with fibers (majority) having diameters in the range of 450-650 nm, depending on composition, and interconnected pore structures. SEM, EDX, and XRD analyses have confirmed the presence of nanoHA in the fibers. As the nanoHA content in the fibers increases, the surface of fibers becomes rougher. The mechanical (tensile) property measurement of the electrospun composites reveals that as the nanoHA content increases, the ultimate strength increases from 1.68 MPa for pure PCL to 2.17, 2.65, 3.91, and 5.49 MPa for PCL/nanoHA composites with the addition of 5, 10, 15, and 20 wt% nanoHA, respectively. Similarly the tensile modulus also increases gradually from 6.12 MPa to 21.05 MPa with the increase of nanoHA content in the PCL/nanoHA fibers, revealing an increase in stiffness of the fibers due to the presence of HA. DSC analysis reveals that as nanoHA in the composite scaffolds increases, the melting point slightly increases due to the good dispersion and interface bonding between PCL and nanoHA.     

Atomistic study of structural, elastic, electronic and thermal properties of perovskites Ba(Ti,Zr,Nb)O3

The full-potential linearized augmented plane waves (FP-LAPW) method based the on density functional theory (DFT) using the generalized gradient approximation (GGA) is applied to study the structural, mechanical, and electronic properties of BaTiO₃, BaZrO₃, and BaNbO₃ cubic perovskites. The quasi-harmonic Debye model, by means of total energy versus volume calculations obtained with the FP-LAPW method, is applied to study the thermal and vibrational effects. Predicted temperature and pressure effects on the structural parameters, thermal expansions, heat capacities, and Debye temperatures are determined from the non-equilibrium Gibbs functions.