Method of Determining Strength and Deformation Characteristics of Soils from Results of Deep Impression of Rod Plates

The possibility of determining strength and deformation characteristics of soils under field conditions using rod plates is discussed. The mutual relationship between these characteristics is established from results of deep impression of these rods.     

Profiles of mean wind speeds and vertical turbulence intensities measured at seashore and two inland sites using Doppler sodars

The authors’ group has been conducting full-scale measurements of wind velocities with Doppler sodars. It is very important to accurately assess the profiles of mean wind speeds and turbulence intensities in relation to terrain roughness. In this study, the profiles were evaluated for all data measured over a long period at a seashore and two inland sites. It is confirmed that for strong winds the profiles can be approximated by a single power law at altitudes between 50 and 340 m. The power law exponents of the mean wind speed profiles are approximately 0.1 for wind from the sea and 0.2-0.3 for wind blown over land. Those of the turbulence intensity profiles are approximately 0 and −0.2 to 0.4, respectively.     

Procedure for predicting settlements of thawing bases for engineering calculations

It was shown that in order to compute the settlement of thawing cohesive soil under a load in time it is necessary to experimentally determine the consolidation coefficient. A procedure is suggested for determining this coefficient, as well as use of the classical solution of a differential equation for seepage consolidation to describe the settlement of soil, thawing of which can occur according to any law.State All-Union Scientific Research Institute of Roads. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 4, pp. 5–7, July–August, 1993.     

Betons a hautes performances,a granulats artificiels actifs

High strength concretes, in particular at early ages (more than 40 MPa at 3 days and up to 80 MPa at 7 days), are obtained by replacement of certain granular size ranges of sand or gravel by cement-active artificial aggregates in a given concrete composition elaborated with a local supply of aggregates and cement. The strengthening of the paste-aggregate bond by chemical reactions between the artificial aggregates and the cement also involves an improvement of other concrete performances and not only of mechanical strengths. The cracking ability is decreased, the wear strength is higher, and water permeability is low or even nil for certain compositions. The laboratory results are confirmed by tests on the site and show the possibility of achieving high strength concretes without any particular selection of cement and natural aggregates.     

Circular footings resting on geotextile-reinforced sand bed

The note pertains to an experimental study made on circular footings resting on semi-infinite layer of sand reinforced with geotextiles. Using the concept of homogenization of such soils, both analytical and numerical analyses have also been conducted to predict the load-settlement behavior and compared with experimental observations. The study highlights the effect of the footing size, number of reinforcing layers, reinforcement placement pattern and bond length and the relative density of the soil on the load-settlement characteristics of the footings.     

Radon concentration in houses over a closed Hungarian uranium mine

High radon concentration (average 410 kBq m-3) has been measured in a tunnel of a uranium mine, located 15-55 m below the village of Kovágószolos, Hungary. The mine was closed in 1997; the artificial ventilation of the tunnel was then terminated and recultivation works begun. In this paper, a study has been made as to whether the tunnel has an influence on the radon concentration of surface dwellings over the mining tunnel. At different distances from the surface projection of the mining tunnel, radon concentration, the gamma dose, radon exhalation and radon concentration of soil gas were measured. The average radon concentration in the dwellings was 483 Bq m-3. Significantly higher radon concentrations (average 667 Bq m-3) were measured in houses within +/-150 m from the surface projection of the mining tunnel +50 m, compared with the houses further than the 300-m belt (average 291 Bq m-3). The average radon concentration of the soil gas was 88.8 kBq m-3, the average radon exhalation was 71.4 Bq m-2 s-1 and higher values were measured over the passage as well. Frequent fissures crossing the passage and running up to the surface and the high radon concentration generated in the passage (average 410 kBq m-3) may influence the radon concentration of the houses over the mining tunnel.     

新的钢化技术及检验方法

近期有几个因素影响到玻璃钢化领域,不仅钢化工艺本身是推动钢化工业的主要因素,其它因素比如钢化市场的参与者们正面临着日益上升的全球化的竞争;客户需要高质量的产品和安全装配规则,新发明的非破坏性检验方法正代替成本较高的老方法;市场上满足汽车及建筑工业要求的新产品;最后钢化设备制造商所生产的满足于新玻璃产品的热处理要求的新产品。对这些问题全面进行了讨论以便为今天的钢化技术提供一个完整的画面。同时也对使用新钢化技术使钢化工业有更辉煌的明天提出了一些建议。     

Determination of flexibility of beam-to-column connectors used in thin walled cold-formed steel pallet racking systems

This paper describes a new test to determine flexibility of beam-to-column connectors used in conventional pallet racking systems. In this study, two different ways were used to find the flexibility of a connector. The connector developed was tested using the conventional cantilever method [Bajoria, KM. Three dimensional progressive collapse of warehouse racking, PhD Thesis, University of Cambridge, UK 1986], and then also using a newly proposed double cantilever method. To verify the results obtained from both the tests, a full scale frame test was carried out. In the double cantilever test the connector is subjected to three types of forces namely moment, shear and the axial pull by the beams, thereby giving behavior close to practical usage of connectors. Non-linear finite element analysis of both the tests and also of the full scale test were carried out using ANSYS [ANSYS 7.0—User's Manual, ANSYS Inc., 2005] software. The results obtained from the double cantilever test were found to match well with the full scale frame test. The experimental results and the finite element results are compared in this paper.     

Aggregate and concrete microfracture

Thin sections cut from cast concrete cylinders have been examined in transmitted light to investigate the significance of coarse aggregate type in “primary” microfracturing. Concretes manufactured with crushed-rock aggregates and gravel aggregates were studied and, in every case, the dominant fracture type was a parting of the aggregate-matrix bond. Bond cracking was least severe with the marble aggregate where epitaxial calcite over-growth was indicated. The ability of bond cracks to maintain continuity by bridging surface irregularities, via mortar cracks, reduced the inhibiting influence of rough-surfaced aggregate on bond-crack development.     

The relative influence of wind,sunlight and temperature on user comfort in urban outdoor spaces

This paper presents the development of a comfort index that measures adaptivity in outdoor spaces. Over a 9-month period 649 people were surveyed in three locations, in temperatures between 10 and 28 °C. An exploratory factor analysis develops a 15-item scale of comfort that includes measures of adaptivity: clothing, exposure time and seating location. The scale is regressed on physical measures: average instantaneous wind speed; maximum wind speed; mean-exposed radiant temperature; mean-shaded radiant temperature and ambient temperature. The results model the relative contributions of the microclimatic factors for the comfort in the outdoor space. Analyses suggest gustiness and wind speed are most important in determining user satisfaction. There is strong support for the theory that people actively adapt to microclimatic conditions.