Heterochromatin effects on the frequency and duration of LCR-mediated gene transcription

Organ transplantation is associated with an early bone loss that subsequently increases the risk of osteopenia and bone fractures. It is not known whether bone loss continues in long-term survivors, but persistent bone demineralization could further jeopardize an already diminished bone mass. To better define long-term bone status of kidney transplant recipients (KTR), we conducted cross-sectional and longitudinal evaluations of bone mineral density (BMD) in 70 KTR with a mean posttransplantation time of 8.1 years. BMD was determined by dual-energy X-ray absorptiometry and was repeated in 55 of the patients after a mean follow-up period of 22 +/- 5 months. Lumbar and femoral osteopenia, defined as a BMD lower than 2 standard deviations from mean value of sex- and age-matched controls, was present in 28.6% and 10.5% of patients, respectively. There was a significant negative correlation between cumulative prednisone dose and adjusted lumbar as well as femoral BMD (R = 0.45, P < 0.001 and R = 0.29, P < 0.05, respectively). Five patients had a vertebral BMD below a fracture threshold of 0.777 g/cm2. Vertebral fractures (VF) were found in four men and were associated with higher prednisone dosage (P < 0.05), larger cumulative prednisone dose (P < 0.05), and significantly lower BMD values. According to World Health Organization recent criteria for women, prevalences of lumbar and femoral osteopenia and lumbar and femoral osteoporosis in female patients reach 75%, 65%, 33%, and 10%, respectively. The longitudinal part of the study showed a persistent pathological lumbar demineralization process. Over the study period, BMD, expressed as a percentage of that of controls, decreased from 89 +/- 14% to 86 +/- 14% (P < 0.001). Annual change of bone mass was -1.7 +/- 2.8% per year. Accelerated vertebral bone loss (defined as a decrease of BMD, expressed as a percentage of that of controls, of more than 1% per year) was present in 56% of patients and was associated with higher prednisone dosage (P < 0.01). In conclusion, although VF are relatively infrequent in long-term survivors of renal transplantation, osteopenia is a frequent finding, and a substantial proportion of women present lumbar osteoporosis. An ongoing demineralization process of the spine is also demonstrated and probably contributes to long-term spinal osteoporosis incidence. Prednisone dosage remains the most constantly isolated risk factor.     

Systemic aluminum toxicity: effects on bone, hematopoietic tissue, and kidney

Although the full mechanisms are not yet elucidated, research into the mechanism of toxicity of aluminum (Al) on bone formation and remodeling and on hematopoietic tissue is ongoing. In contrast little information exists on the interactive effects of systemic Al and the kidney. In bone, both clinically and experimentally, high doses of Al inhibit remodeling, slowing both osteoblast and osteoclast activities and producing osteomalacia and adynamic bone disease. In contrast, while very low levels of Al are mitogenic in bones of experimental animals, the effect of low levels of Al in humans is unknown. Aluminum has been shown to have its mitogenic action at the osteoblast, but whether the effect on resorption is viz osteoblast-directed changes in osteoclast activity has not yet been determined. Parathyroid hormone (PTH) levels are disrupted by Al in humans and animals. Whether altered PTH levels play a major or even a minor role in Al-dependent osteotoxicity requires clarification. In hematopoietic tissue, Al causes a microcytic anemia, not reversible by iron. Friend leukemia cells treated with Al have been reported to accumulate excess iron, without incorporating it into ferritin or heme. It is not yet known which steps in iron metabolism are disrupted by Al, if they involve a single mechanism of action, or even if this disruption in iron metabolism accounts for the anemia seen in Al toxicosis. In kidney, research is needed to evaluate Al nephrotoxicity; there are almost no studies in this area. Furthermore, research is needed to evaluate mechanisms of renal Al excretion, presently shown by one study to occur at the distal tubule. Such studies might well throw light on whether Al plays a role in aggravating renal insufficiency, or whether the role of the kidney in Al toxicosis is limited to the causative effect of renal compromise on Al accumulation. In summary, while a number of mechanisms have been proposed for the toxic action of Al, no single mechanism emerges to explain these diverse effects of systemic Al. Recommendations for future research are presented and summarized in Table 1.     

Cardiovascular effects of conventional sulfonylureas and glimepiride

Sulfonylureas have, in the past, been reported to have adverse cardiovascular effects. Glimepiride is a new sulfonylurea. In spite of stimulating less insulin secretion, it has, depending on the species, equal or higher blood glucose decreasing activity and according to preliminary studies less cardiovascular activity than glibenclamide. Further studies were performed to confirm the lower cardiovascular activity of glimepiride. The IC50 for inhibition of rilmakalim-activated KATP channel currents in isolated ventricular myocytes was 31.6 nM for glimepiride and 6.8 nM for glibenclamide. In endotoxin shock-rats at a dose of 1 x 2 mg/kg i.v., glibenclamide induced a significantly higher blood pressure increase than glimepiride. At two i.v. doses of 20 mg/kg 4 min apart, in normal rats, glibenclamide produced signs of ischemia in the ECG in nearly all animals, glimepiride almost none, in diabetic rats, glibenclamide produced in all animals a lethal cardiogenic shock preceeded by serious ECG changes, glimepiride only in one fifth of the animals. In open-chest dogs, on intracoronary infusion of equieffective blood glucose-lowering doses, glibenclamide, gliclazide and glimepiride all reduced coronary blood flow, increased coronary resistance, depressed the mechanical activity of the heart, enhanced myocardial O2-extraction, reduced the serum potassium level and induced a moderate endocardial ST-segment elevation, but glimepiride to a significantly less extent than glibenclamide and gliclazide. The presented data confirm that glimepiride at equivalent blood glucose decreasing doses has less cardiovascular activity than conventional sulfonylureas.     

Noise transfer characteristics in wavelength conversion based on cross-gain saturation in a semiconductor optical amplifier

Wavelength conversion based on cross-gain saturation in a semiconductor optical amplifier is studied from the viewpoint of how fluctuation in the input signal is transferred to the converted signal. Experiments in which a signal light with amplifier ASE noise is converted show that fluctuation in the "on"-level is suppressed while fluctuation in the "off"-level is enhanced due to the in/out relation of the converter.     

Diffraction of millimeter waves by projecting a shadow pattern onto a semiconductor

The transmission of millimeter waves through a semiconductor changes according to the amount of light falling on it. In the experiments reported here, a pattern of light and shadow is projected onto a sheet of semiconductor and the regions of greater and lesser transmission serve as a diffracting object for a millimeter-wave beam. The light source is a quartz tungsten halogen lamp. A lock-in amplifier is employed to overcome difficulties due to the differences in transmitted power being small.     

Instron texture profile of buffalo milk cheddar cheese as influenced by composition and ripening changes

Buffalo milk Cheddar cheese samples of different ages were analysed for compositional attributes (CA), ripening indices (RI) and Instron Textural Profile (ITP). All samples were compositionally alike, except for pH and salt-in-moisture (SM) contents. RI showed significant variations. CA and RI showed highly significant correlations within themselves and with each other, except for moisture with pH, SM with moisture, MNFS, Fat and FDM and Fat with MNFS. The ITPs of cheeses showed significant variations and had highly significant intercorrelations indicating their interdependence. CA (except moisture and MNFS) and RI showed a highly significant correlationship with ITPs. Moisture content showed a highly significant correlationship with all ITPs, except cohesiveness and springiness, where it was significant. MNFS content showed significant correlations only with hardness and brittleness. Stepwise regression analysis revealed that MI was the most predominant factor influencing cheese texture, followed by pH, SM, FDM and TVFA. Knowing Ca and RI, the textural properties of cheeses can be forecast through mathematical equations. Similarly the age of cheese can also be predicted if RI and/or textural properties are known.     

Growth and characterization of hot-wall epitaxial CdTe on (111) HgCdTe and CdZnTe substrates

Thin CdTe films were deposited by hot-wall epitaxy (HWE) on (111) HgCdTe and CdZnTe substrates at temperatures from about 140 to 335°C. X-ray rocking curves were used to show that crystal quality of the CdTe (111)B films improved as substrate temperature increased from 140 to about 250°C. Rocking curve values for full width at half maximum (FWHM) decreased from 2–4 degrees at 140–150°C to less than 100 arc-s at 250°C, and a FWHM of 59 arc-s was the lowest value observed near 250°C. The FWHM of the HWE CdTe was found to be insensitive to growth rate below about 400Å/min, but increased to four degrees at 1250Å/min. X-ray diffraction confirmed that films grown on the B-face at higher temperatures were epitaxial, but contained a significant volume fraction, 35% to 50%, of rotational in-plane twins. Electron microscopy confirmed a coarse twin density, and photoluminescence spectra showed an absence of excitonic emission in the HWE films. Simultaneous growth on two (111) HgCdTe substrates with different surface polarities between 230°C and 335°C showed that deposition rate on the A-face decreased relative to that on the B-face as temperature increased. Films grown on the B-face exhibited better surface morphologies than those grown on the A-face.     

Evaluation of Qbd for electrons tunneling fromthe Si/SiO2 interface compared to electron tunneling from thepoly-Si/SiO2 interface

Electrical time-to-breakdown (TTB) measurements have shown the charge to breakdown Q_bd of gate oxide capacitors fabricated on n-type well (n-well) substrates always to be higher than that of capacitors on p-type well (p-well) substrates on the same wafer when both are biased into accumulation under normal test conditions. Here the authors correlate the higher n-well Q_bd to smooth capacitor oxide/substrate interfaces and minimized grain boundary cusps at the poly-Si gate/oxide interfaces, confirming that Fowler-Nordheim tunneling is the dominant current conduction mechanisms through the oxide. They correlate higher Q_bd to higher barrier height for a given substrate type and observe that the slope of the barrier height versus temperature plot is lower for both p-well and n-well cases with electrons tunneling from the silicon substrate. This is attributed to surface roughness at the poly-Si gate/SiO₂ interface. A poly-Si gate deposition and annealing process with clean, smooth oxide/substrate interfaces will improve the p-well breakdown characteristics and allow higher Q_bd to be achieved     

Issues in nonlinear stochastic grey box identification

Grey box identification refers to the practice of identifying dynamical systems in model structures exploiting partial prior information. This contribution reviews a method for stochastic grey box identification and surveys experiences and lessons of applying it to a number of industrial processes. Issues to be addressed include advantages and costs of introducing stochastics into the model, the question of what contribution must be expected from the model designer as opposed to what can be formalized in computer algorithms, and an outlook on future plans to resolve present shortcomings.     

Aromatic nitrations by mixed acid. Slow liquid-liquid reaction regime

Aromatic nitrations by mixed acid have been selected as a specific case of a heterogeneous liquid-liquid reaction. An extensive experimental programme has been followed using adiabatic and heat-flow calorimetry and pilot reactor experiments, supported by chemical analysis. A series of nitration experiments has been carried out to study the influences of different initial and operating conditions such as temperature, stirring speed and sulphuric acid concentration. In parallel, a mathematical model to predict the overall conversion rate has been developed. In this paper the mathematical modelling and the implementation and experimental validation for benzene, toluene and chlorobenzene mononitration in the kinetic control regime (slow liquid-liquid reaction) are presented and discussed.