Investigation of engineering properties for usability of Lefke stone (Osmaneli/Bilecik) as building stone

Lefke stone is a sandstone that has been widely used in mosques, madrasas, churches, and houses as building stone. The geological features and engineering properties of Lefke stone outcropped in the southern part of Osmaneli/Bilecik were investigated in field and laboratory studies. Samples acquired during the fieldwork were tested to determine the physical, mechanical, durability, and hygrothermal properties in the laboratory. The mean physico-mechanical properties of Lefke stone yielded apparent density of 2.38 g/cm³, specific gravity of 2.68 g/cm³, total porosity of 11.26%, 2.93% water absorption by weight, uniaxial compressive strength of 94 MPa, flexure strength of 11.45 MPa, a 3.90 MPa point load strength, 4.5–5 Mohs hardness, and field Schmidt hammer rebound value of 36. According to durability tests, Lefke stone is resistant to CaCl₂ salt mist but has low resistance to SO₂ aging. Salt crystals placed in the discontinuities of the rock caused slight crack growth. The stone’s resistance to crystallization of sodium sulphate salt is low, and an increase in the volume of salts crystallized in the rock results in low corner strengths. A capillary water-absorption value of 0.0016 kg/m².h places Lefke stone into the category of very low water absorption capacity and permeability. The water vapor diffusion resistance factor (μ) less than 1 indicates that the sandstone has high breathability. Its performance in historical buildings, field observations, and values obtained through laboratory tests confirm that Lefke sandstone can be used as a building stone.

     

Estimation of ground pressures on a shielded TBM in tunneling through squeezing ground and its possibility of jamming

Bulletin of Engineering Geology and the Environment - Single- and double-shield tunnel boring machines are being increasingly considered for use in rock tunneling projects. However, one of the main...     

The fabrication of exfoliated graphite sheet-based air cathodes and gel electrolyte for metal-air batteries

In this paper, we demonstrate that activated carbon (AC) and manganese dioxide (MnO₂) coated exfoliated graphite sheets are a promising cathode for metal-air batteries. A simple and effective method is developed to exfoliate the graphite sheets and to load a catalyst onto their surfaces. Several low-cost, environmentally friendly air cathodes are fabricated, and their performances are tested by constructing Al-air b`atteries whose electrolyte 6 M NaOH, including ZnO inhibitor, is gelled by adding a cost-effective water retainer. The experimental results show that this new Al-air battery has a good discharge performance. In particular one of the new cathodes containing 50 wt% AC and 50 wt% MnO₂ produces a capacity of 311 mAh/g at a constant current discharge of 1.56 mA. Finally, future research directions are discussed for the further usage of the fabricated cathodes.     

Evaluation of the potential use of discard species for fish silage and assessment of its oils for human consumption

Waste or by-products contains a substantial amount of nutrients. Fish silage is an alternative way for assessment of fish discards and waste generated in the fish processing industries. The aim of the study was to evaluate the potential use of discard species (Equulites klunzingeri, marine fish and Carassius gibelio, freshwater fish) for fish silage and chemical quality of fish oil extracted from fish silages prepared with acid and fermented methods. Lipid quality of fish oils extracted from fish silages with LAB strains was evaluated in terms of thiobarbituric acid (TBA), peroxide value (PV), p-Anisidine (AV), totox values and fatty acid composition. The results showed that PV, TBA, AV and totox values of all extracted fish oils were within the acceptable limits for edible oils. Recovered fish oils from silage contained high level of polyunsaturated fatty acids (PUFAs), especially eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), serving as a source of good quality fish oil for human consumption.