Luminomagnetic Nd3+ doped fluorapatite coated Fe3O4 nanostructures for biomedical applications

Luminomagnetic nanostructured Nd³⁺ doped fluorapatite (FAP) coated Fe₃O₄ nanoparticles were produced by hydrothermal method. X-ray diffraction analysis indicates that the prepared nanoparticles contain both FAP and Fe₃O₄ phases. Electron microscope analysis shows the formation of nanoparticles of Fe₃O₄ encased in rod shaped FAP nanoparticles of average length 40 nm. Magnetic measurements confirm the room temperature superparamagnetic nature of the nanoparticles with saturation magnetization value up to 7.8 emu/g. The prepared nanoparticles display strong near infrared (NIR) emission at 1060 nm under 800 nm excitation. Cell viability studies for 72 hour demonstrate the survival rate of over 84% with 500 μg/mL concentration indicating the good cytocompatibility of the prepared materials. The present Nd³⁺ doped FAP coated Fe₃O₄ nanostructure provides an excellent multifunctional platform for diagnostics and therapeutic applications.     

An Efficient,Stable and Reusable Palladium Nanocatalyst: Chemoselective Reduction of Aldehydes with Molecular Hydrogen in Water

Palladium nanoparticles (Pd‐BNP) stabilized by a binaphthyl‐backbone can be efficiently used for the chemoselective reduction of aldehydes in the presence of hydrogen at room temperature in water. The Pd‐BNP catalyst is easily recovered and reused for five catalytic cycles.

     

Densification characteristics of corn cobs

Corn cobs are potential feedstocks for producing heat, power, fuels, and chemicals. Densification of corn cobs into briquettes/pellets would improve their bulk handling, transportation, and storage properties. In this study, densification characteristics of corn cobs were studied using a uniaxial piston-cylinder densification apparatus. With a maximum compression pressure of 150 MPa, effects of particle size (0.85 and 2.81 mm), moisture content (10 and 20% w.b.), and preheating temperature (25 and 85 °C) on the density and durability of the corn cob briquettes (with diameter of about 19.0 mm) were studied. It was found that the durability (measured using ASABE tumbling can method) of corn cob briquettes made at 25 °C was 0%. At both particle sizes, preheating of corn cob grinds with about 10% (w.b.) moisture content to 85 °C produced briquettes with a unit density of > 1100 kg m^-3 and durability of about 90%.     

LI-BIST: A Low-Cost Self-Test Scheme for SoC Logic Cores and Interconnects

For system-on-chips (SoC) using deep submicron (DSM) technologies, interconnects are becoming critical determinants for performance, reliability and power. Buses and long interconnects being susceptible to crosstalk noise, may lead to functional and timing failures. Existing at-speed interconnect crosstalk test methods propose inserting dedicated interconnect self-test structures in the SoC to generate vectors which have high crosstalk defect coverage. However, these methods may have a prohibitively high area overhead. To reduce this overhead, existing logic BIST structures like LFSRs could be reused to deliver interconnect tests. But, as shown by our experiments, use of LFSR tests achieve poor crosstalk defect coverage. Additionally, it has been shown that the power consumed during testing can potentially become a significant concern.In this paper, we present Logic-Interconnect BIST (LI-BIST), a comprehensive self-test solution for both the logic of the cores and the SoC interconnects. LI-BIST reuses existing logic BIST structures but generates high-quality tests for interconnect crosstalk defects, while minimizing the area overhead and interconnect power consumption. The application of the LI-BIST methodology on example SoCs indicates that LI-BIST is a viable, low-cost, yet comprehensive solution for testing SoCs.     

Chaos in mechanical systems — A review

In this paper, a review of the various developments in the field of chaotic dynamics with specific emphasis on chaos in structural and mechanical systems is presented. The paper discusses some known chaotic systems such as the Lorenz, Rössler, Ueda and Henon attractors as well as chaos in Duffing and Van der Pol oscillators. The paper also covers chaos in piecewise linear systems, impacting oscillators and flow induced vibrating systems. Topics such as bifurcations and routes to chaos, different ways of characterising chaos, domains of attraction and control of chaos are also discussed.     

High-sensitivity humidity sensor based on SnO2 nanoparticles synthesized by microwave irradiation method

Tin oxide hexagonal-shaped nanodiscs (SnO) and spherical nanoparticles (SnO₂) have been prepared by using a simple household microwave irradiation method with an operating frequency of 2.45 GHz. This technique permits us to produce gram quantity of homogeneous nanoparticles in just 10 min. The crystallite size was evaluated from powder X-ray diffraction (XRD) studies and was in the 20 to 25 nm range. Transmission electron microscopy (TEM) analysis showed that the as prepared SnO form as hexagonal-shaped nanodiscs and upon subsequent annealing at 500 °C for 5 h in air, the SnO gets converted to spherical-shaped nanoparticles of SnO₂. The SnO₂ sample shows good sensitivity towards the relative humidity. The calculated response and recovery time were found to be 32 s and 25 s respectively. These results indicate promising applications of SnO₂ nanoparticles in a highly sensitive environmental monitoring and humidity controlled electronic devices. The samples were further subjected to thermal analyses (TG–DTA) and UV–VIS diffusion reflectance spectroscopy (DRS) studies.     

Reducing life cycle greenhouse gas emissions of corn ethanol by integrating biomass to produce heat and power at ethanol plants

A life-cycle assessment (LCA) of corn ethanol was conducted to determine the reduction in the life-cycle greenhouse gas (GHG) emissions for corn ethanol compared to gasoline by integrating biomass fuels to replace fossil fuels (natural gas and grid electricity) in a U.S. Midwest dry-grind corn ethanol plant producing 0.19 hm³ y⁻¹ of denatured ethanol. The biomass fuels studied are corn stover and ethanol co-products [dried distillers grains with solubles (DDGS), and syrup (solubles portion of DDGS)]. The biomass conversion technologies/systems considered are process heat (PH) only systems, combined heat and power (CHP) systems, and biomass integrated gasification combined cycle (BIGCC) systems. The life-cycle GHG emission reduction for corn ethanol compared to gasoline is 38.9% for PH with natural gas, 57.7% for PH with corn stover, 79.1% for CHP with corn stover, 78.2% for IGCC with natural gas, 119.0% for BIGCC with corn stover, and 111.4% for BIGCC with syrup and stover. These GHG emission estimates do not include indirect land use change effects. GHG emission reductions for CHP, IGCC, and BIGCC include power sent to the grid which replaces electricity from coal. BIGCC results in greater reductions in GHG emissions than IGCC with natural gas because biomass is substituted for fossil fuels. In addition, underground sequestration of CO₂ gas from the ethanol plant’s fermentation tank could further reduce the life-cycle GHG emission for corn ethanol by 32% compared to gasoline.     

Growth and Characterization of C60 Crystals from Pure C60 and Fullerite

Good quality C₆₀ crystals have been grown from high purity C₆₀ powder and fullerene mixture (C₆₀/C₇₀) by vacuum sublimation method. The grown crystals were characterized with Optical microscopy, SEM, powder XRD, High Performance Liquid Chromatography and Raman spectroscopic analyses.     

Antilipolytic actions of vanadate and insulin in rat adipocytes mediated by distinctly different mechanisms

Vanadate, which mimics the biological effects of insulin, also inhibits lipolysis in rat adipocytes. Here we demonstrate that the antilipolytic effect of vanadate differs from that of insulin at least by the five following criteria: 1) vanadate inhibits lipolysis mediated by high (supraphysiological) concentrations of catecholamines; 2) vanadate antagonizes (Bu)2cAMP-mediated lipolysis; 3) vanadate antagonizes isobutylmethylxanthine-dependent lipolysis, 4) vanadate inhibits lipolysis mediated by okadaic acid; and 5) wortmannin, which blocks the antilipolytic effect of insulin, fails to block vanadate-mediated antilipolysis. Vanadate does activate phosphoinositol 3-kinase, and wortmannin blocks this activation. Our working hypothesis assumes that all of the insulin-like effects of vanadate, including antilipolysis, are initiated by the inhibition of protein phosphotyrosine phosphatases (PTPases). Among documented PTPase inhibitors we found that VOSO4 (oxidation state +4), several organic vanadyl compounds (+4), zinc (Zn2+), tungstate (W), and molybdate (Mo) also had antilipolytic activity. The order of potency was vanadyl acetylacetonate > or = VOSO4 > or = NaVO3 > or = vanadyl-dipicolinate > Zn2+ > W > Mo, and it correlated better with the inhibition of adipose membranal-PTPases in cell-free experiments. We have concluded that the antilipolytic effect of vanadate is 1) mechanistically distinct from that of insulin, 2) independent of phosphoinositol 3-kinase activation, and 3) independent of the lipolytic cascade. We also strongly suggest that the antilipolytic effect of vanadate emanates from inhibiting adipose membranal, rather than cytosolic PTPases, and present preliminary data showing distinct differences in catalysis between these two PTPase categories. Overall, the study indicates that antilipolysis can be manifested via alternative, insulin-independent, signal-transducing pathways.