Movement sequencing disorders in Parkinson's disease

Ten PD patients and ten age-matched normal controls learned a sequence of 3 or 4 different hand movements to a criterion of 5 consecutive correct trials. They also performed a control sequence of 3 or 4 movements which involved the repetition of the same hand posture. Trials to reach criterion, errors, total response time and its components, response time for each movement and inter-response time were examined. There were no group differences in trials to criterion or errors. Total movement time as well as response and inter-response times were significantly longer for the PD patients, however, but only for sequences involving different hand movements not for the repetitive sequences. The relative timing of the responses was also different with the PD patients spending proportionately more time on each response and the controls spending more time between responses. The implications of these findings for understanding the movement sequencing impairments in PD are discussed.     

Temperature and pressure effects on supercritical CO2 extraction of tomato seed oil

Tomato seed oil was extracted with supercritical carbon dioxide in a semibatch-flow extractor within the temperature range 313–343 K and the pressure range 10.8–24.5MPa. The extraction rates increased with pressure, but decreased with temperature increase because of the variation in solvent density and resultant differences in oil solubility. The fatty acid composition of the extracted oil was similar to that of soybean oil.     

Preservation of myocyte contractile function after hypothermic, hyperkalemic cardioplegic arrest with 2, 3-butanedione monoxime

One proposed contributory mechanism for depressed ventricular performance after hypothermic, hyperkalemic cardioplegic arrest is a reduction in myocyte contractile function caused by alterations in intracellular calcium homeostasis. Because 2,3-butanedione monoxime decreases intracellular calcium transients, this study tested the hypothesis that 2,3-butanedione monoxime supplementation of the hyperkalemic cardioplegic solution could preserve isolated myocyte contractile function after hypothermic, hyperkalemic cardioplegic arrest. Myocytes were isolated from the left ventricles of six pigs. Magnitude and velocity of myocyte shortening were measured after 2 hours of incubation under normothermic conditions (37 degrees C, standard medium), hypothermic, hyperkalemic cardioplegic arrest (4 degrees C in Ringer's solution with 20 mEq potassium chloride and 20 mmol/L 2,3-butanedione monoxime). Because beta-adrenergic agonists are commonly employed after cardioplegic arrest, myocyte contractile function was examined in the presence of the beta-agonist isoproterenol (25 nmol/L). Hypothermic, hyperkalemic cardioplegic arrest and rewarming reduced the velocity (32%) and percentage of myocyte shortening (27%, p < 0.05). Supplementation with 2,3 butanedione monoxime normalized myocyte contractile function after hypothermic, hyperkalemic cardioplegic arrest. Although beta-adrenergic stimulation significantly increased myocyte contractile function under normothermic conditions and after hypothermic, hyperkalemic cardioplegic arrest, contractile function of myocytes exposed to beta-agonist after hypothermic, hyperkalemic cardioplegic arrest remained significantly reduced relative to the normothermic control group. Supplementation with 2,3-butanedione monoxime restored beta-adrenergic responsiveness of myocytes after hypothermic, hyperkalemic cardioplegic arrest. Thus, supplementation of a hyperkalemic cardioplegic solution with 2,3-butanedione monoxime had direct and beneficial effects on myocyte contractile function and beta-adrenergic responsiveness after cardioplegic arrest. A potential mechanism for the effects of 2,3-butanedione monoxime includes modulation of intracellular calcium transients or alterations in sensitivity to calcium. Supplementation with 2,3-butanedione monoxime may have clinical utility in improving myocardial contractile function after hypothermic, hyperkalemic cardioplegic arrest.     

Differential current switch logic: a low power DCVS logic family

Differential current switch logic (DCSL), a new logic family for implementing clocked CMOS circuits, has been developed. DCSL is in principle a clocked differential cascode voltage switch logic circuit (DCVS). The circuit topology outlines a generic method for reducing internal node swings in clocked DCVS logic circuits. In comparison to other forms of clocked DCVS, DCSL achieves better performance both in terms of power and speed by restricting internal voltage swings in the NMOS tree. DCSL circuits are capable of implementing high complexity high fan-in gates without compromising gate delay. Automatic lock-out of inputs on completion of evaluation is a novel feature of the circuit. Three forms of DCSL circuits have been developed with varying benefits in speed and power. SPICE simulations of circuits designed using the 1.2 μm MOSIS SCMOS process indicate a factor of two improvement in speed and power over comparable DCVS gates for moderate tree heights     

The effect of sodium sulfate on solidification/stabilization of a synthetic electroplating sludge in cementitious binders

The effect of sodium sulfate on the solidification/stabilization of a large quantity of a synthetic electroplating sludge in cementitious binders was s     

A local theory of heating in cross-ply carbon fiber thermoplastic composites by magnetic induction

For joining and repair of continuous fiber thermoplastic composites, induction heating has been viewed a strong candidate. Induction heating employs an applied alternating magnetic field, which induces a rotational emf in a grid of conductive carbon fibers, which are then used to carry resulting currents. In continuous carbon fiber crossply composites the available paths for “eddy current” loops are along the network of conductive carbon fibers. For this to occur, an electrical transfer must take place between crossing fibers in adjacent plies. Tests involving variable thicknesses of interply neat film layers have been performed to provide insight into the mechanisms taking place. These tests indicate that the primary mechanism for heating in such laminates is dielectric losses in the polymeric region between fibers in adjacent planes that form the conductive loop. Therefore, heating is not uniform in such composites despite a uniform magnetic flux. Heating patterns were viewed using liquid crystal materials and E-type thermocouples. Several factors leading to nonhomogeneous thermal distributions have been considered, including current density effects, internal emf cancellation, and rotational field effects. Global and local considerations are addressed, a localized model is proposed, and the corresponding theory is developed qualifying the early results. Additional testing has supported the theory.     

Intellectual performance and ego depletion: Role of the self in logical reasoning and other information processing.

Some complex thinking requires active guidance by the self, but simpler mental activities do not. Depletion of the self's regulatory resources should therefore impair the former and not the latter. Resource depletion was manipulated by having some participants initially regulate attention (Studies 1 and 3) or emotion (Study 2). As compared with no-regulation participants who did not perform such exercises, depleted participants performed worse at logic and reasoning (Study 1), cognitive extrapolation (Study 2), and a test of thoughtful reading comprehension (Study 3). The same manipulations failed to cause decrements on a test of general knowledge (Study 2) or on memorization and recall of nonsense syllables (Study 3). Successful performance at complex thinking may therefore rely on limited regulatory resources. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Thermal stability in bulk cryomilled ultrafine-grained 5083 Al alloy

Thermal stability in bulk ultrafine-grained (UFG) 5083 Al that was processed by gas atomization followed by cryomilling, consolidation, and extrusion, and that exhibited an average grain size of 305 nm, was investigated in the temperature range of 473 to 673 K (0.55 to 0.79 T _m , where T _m is the melting temperature of the material) for different annealing times. Appreciable grain growth was observed at temperatures > 573 K, whereas there was limited grain growth at temperatures < 573 K even after long annealing times. The values of the grain growth exponent, n, deduced from the grain growth data were higher than the value of 2 predicted from elementary grain growth theories. The discrepancy was attributed to the operation of strong pinning forces on boundaries during the annealing treatment. An examination of the microstructure of the alloy suggests that the origin of the pinning forces is most likely related to the presence of dispersion particles, which are mostly introduced during cryomilling. Two-grain growth regimes were identified: the low-temperature region (<573 K) and the high-temperature region (>573 K). For temperatures lower than 573 K, the activation energy of 25 ± 5 kJ/mol was determined. It is suggested that this low activation energy represents the energy for the reordering of grain boundaries in the UFG material. For temperatures higher than 573 K, an activation energy of 124 ± 5 kJ/mol was measured. This value of activation energy, 124 ± 5 kJ/mol, lies between that for grain boundary diffusion and lattice diffusion in analogous aluminum polycrystalline systems. The results show that the strength and ductility of bulk UFG 5083 Al, as obtained from tensile tests, correlate well with substructural changes introduced in the alloy by the annealing treatment.     

Electrical and optical studies of ZnO:Ga thin films fabricated via the sol–gel technique

The effects of dopant (Ga) concentration, post-heat treatment temperatures, and different heat treatment environments on the morphology, electrical and optical properties of ZnO films were studied. ZnO films doped with Ga are derived from non-alkoxide zinc acetate via the alcoholic route by a sol–gel dip-coating technique. Introduction of Ga, as a dopant, can reduce crystallite size, which is attributed to the increased number of nucleation centers. Grain growth was also observed at high post-heat treatment temperature. It was discovered that different post-heat treatment environments (air or reduced atmosphere) did not change the structure orientation, microstructure shapes and size. It was found that the sheet resistance, R_s could be reduced by an order of magnitude, using post-heat treatment in reduced atmosphere (4%H₂–96%N₂).