Material flow analysis and integration of watersheds and drain systems: II. Integration and solution strategies with application to ammonium management in Bahr El-Baqar drain system

The objective of this paper is to develop a systematic methodology for mass integration in drain systems and watersheds. Mass integration is a holistic approach to the tracking, transformation, and allocation of species and streams. The watershed and drain system is first discretized into reaches. The MFA model developed in part I of this work (Simulation and Application to Ammonium Management in Bahr El-Baqar Drain System) is used to describe the environmental phenomena that affect the fate and transport of targeted species and the operators that characterize the system inputs and outputs as they relate to the surroundings. Next, we develop an integration framework which encompasses sources, sinks, and interception technologies to aid in the development for nitrogen-management strategies. The simulation model was transformed into a synthesis model by introducing optimization variables and including models for the potential management strategies. The problem of minimizing negative environmental impact subject to technical, social, economic, and regulatory constraints was posed as a nonlinear optimization program whose solution identified and synthesized the most effective solution strategies. These mathematical models and management strategies were coded into a computer-aided tool using LINGO programming platform. The program can be readily modified to address a variety of cases. Tradeoffs and sensitivity analysis were established using the devised model. The devised framework was applied to an Egyptian drain system (Bahr El-Baqar) along with the outfall to Lake Manzala. The results of the case study provide solution strategies for nitrogen management along with their technical, economic, and environmental implications.     

床沙表层非均匀分布对泥沙输移的影响

本文基于床沙宽度百分比及面积百分比的分析，选择上述二者有关参数来反映床沙表层不均匀分布特征，并由此得到了床沙不受隐蔽作用的最大粒径Ｄａ与面积平均粒径ｄｓ之关系。借助力学分析方法，分别得到了隐蔽区与暴露区的泥沙起动流速公式；同时，在输沙率关系中引入了宽度百分比Ｐｂ及ｄｓ，该式能较好地反映床沙粗化过程中，输沙率与表层泥沙组成之间的依存关系。     

Development and Verification of Simulation Model Based on Real MANET Experiments for Transport Layer Protocols （UDP and TCP）

There is a lack of appropriate guidelines for realistic user traces, mobility models, routing protocols, considerations of real-life challenges, etc. for general-purpose mobile ad hoc networks (MANET). In this paper, four laptops are used in an open field environment in four scenarios to evaluate the performances of Internet control message protocol (ICMP) based ping and transmission control protocol (TCP) based streaming video applications using optimised link state routing (OLSR) implementation in an IEEE 802.11g wireless network. Corresponding simulations are developed in Network Simulator ns-2 by setting simulation parameters according to the real experiments. Difficulties faced to regenerate real-life scenarios have been discussed and the gaps between reality and simulation are identified. A setup guideline to produce realistic simulation results has been established.     

Integrated maintenance and mission planning using remaining useful life information

The modern world requires high reliability and availability with minimum ownership cost for complex industrial systems (high-value assets). Maintenance and mission planning are two major interrelated tasks affecting availability and ownership cost. Both tasks play critical roles in cost savings and effective utilization of the assets, and cannot be performed without taking each other into consideration. Maintenance schedule may make an asset unavailable or too risky to use for a mission. Mission type and duration affect the health of the system, which affects the maintenance schedule. This article presents a mathematical formulation for integrated maintenance and mission planning for a fleet of high-value assets, using their current and forecast health information. An illustrative example for a fleet of unmanned aerial vehicles is demonstrated and evolutionary-based solutions are presented.     

Dielectric relaxation in complex perovskite Ba(Bi1/2Ta1/2)O3

A new lead-free perovskite Ba(Bi_1/2Ta_1/2)O₃ was prepared by conventional ceramic fabrication technique at 1,200 °C/4 h in air atmosphere. The crystal symmetry, space group and unit cell dimensions were determined from the experimental results using FullProf software. The crystallite size and lattice strain were estimated from Williamson-Hall approach. XRD analysis of the compound indicated the formation of a single-phase cubic structure with the space group Pm3m. EDAX and SEM studies were carried out in order to evaluate the quality and purity of the compound. Permittivity data showed a low temperature coefficient of capacitance (T _CC  < 4%) up to +125 °C. Complex impedance analyses suggested the dielectric relaxation to be of non-Debye type. Electric modulus studies supported the hopping type of conduction in Ba(Bi_1/2Ta_1/2)O₃.     

Properties of PET/clay nanocomposite films

Polyethylene terephthalate (PET) nanocomposite films were prepared by cast extrusion followed by uniaxial stretching, using chill rolls. Transmission electron microscopy (TEM) and wide angle X‐ray diffraction (WAXD) showed that the clay layers were aligned in the machine direction (MD) in the PET/clay nanocomposite (PCN) films. Differential scanning calorimetry (DSC) showed that PCN films have higher crystallinity than the neat PET films, possibly due to the nucleating role of the silicate layers. The PCN films became hazier as the clay content increased, but the film transparency remained in the acceptable range. Oxygen permeability of the PCN films decreased by 23% compared to the neat PET film. This is comparable with predictions of models proposed in the literature. Silicate incorporation brought about 20% increase in the tensile modulus, while the puncture and tear propagation resistance were reduced, due to brittleness of the PCN films. The measured modulus (1.7 GPa) was somewhat smaller than the values predicted using the Pseudoinclusion model (2.1 GPa). POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Investigation on the effect of spinning conditions on the properties of hollow fiber membrane for hemodialysis application

Polyethersulfone (PES) hollow fiber membranes were fabricated via the dry‐wet phase inversion spinning technique, aiming to produce an asymmetric, micro porous ultrafiltration hollow‐fiber specifically for hemodialysis membrane. The objective of this study is to investigate the effect of spinning conditions on the morphological and permeation properties of the fabricated membrane. Among the parameters that were studied in this work are air gap distance, dope extrusion rate, bore fluid flow rate, and the take‐up speed. The contact angle was measured to determine the hydrophilicity of the fibers. Membrane with sufficient hydrophilicity properties is desired for hemodialysis application to avoid fouling and increase its biocompatibility. The influences of the hollow fiber's morphology (i.e., diameter and wall thickness) on the performance of the membranes were evaluated by pure water flux and BSA rejection. The experimental results showed that the dope extrusion rate to bore fluid flow rate ratio should be maintained at 1:1 ratio to produce a perfectly rounded asymmetric hollow fiber membrane. Moreover, the flux of the hollow fiber spun at higher air gap distance had better flux than the one spun at lower air gap distance. Furthermore, spinning asymmetric hollow fiber membranes at high air gap distance helps to produce a thin and porous skin layer, leading to a better flux but a relatively low percentage of rejection for BSA separation. Findings from this study would serve as primary data which will be a useful guide for fabricating a high performance hemodialysis hollow fiber membrane. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43633.     

Synthesis,Characterization and Surface Properties of Amidosulfobetaine Surfactants Bearing Odd-Number Hydrophobic Tail

Three amidosulfobetaine surfactants were synthesized namely: 3-(N-pentadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2a); 3-(N-heptadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2b), and 3-(N-nonadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2c). These surfactants were prepared by direct amidation of commercially available fatty acids with 3-(dimethylamino)-1-propylamine and subsequent reaction with 1,3-propanesultone to obtain quaternary ammonium salts. The synthesized surfactants were characterized by IR, NMR and mass spectrometry. Thermogravimetric analysis (TGA) results showed that the synthesized surfactants have excellent thermal stability with no major thermal degradation below 300 °C. The critical micelle concentration (CMC) values of the surfactants 2a and 2b were found to be 2.2 × 10^?4 and 1.04 × 10^?4 mol/L, and the corresponding surface tension (γ_CMC) values were 33.14 and 34.89 mN m^?1, respectively. The surfactants exhibit excellent surface properties, which are comparable with conventional surfactants. The intrinsic viscosity of surfactant (2b) was studied at various temperatures and concentrations of multi-component brine solution. The plot of natural logarithm of relative viscosity versus surfactant concentration obtained from Higiro et al. model best fit the surfactant behavior. Due to good salt resistance, excellent surface properties and thermal stability, the synthesized surfactant has potential to be used in various oil field applications such as enhanced oil recovery, fracturing, acid diversion, and well stimulation.