Mechanical Characterization of Austempered Ductile Iron Obtained by Two Step Austempering Process

Austempered ductile iron (ADI) is known to have a good combination of mechanical properties due its unique ausferrite microstructure. The strength of ADI is mainly a function of the austempering temperature and the stability of ausferrite matrix. To increase the stability of the ausferritic matrix, two stage austempering processes was developed. During this investigation, in the Ist step, ductile iron specimens were austenitized at 900 °C for 60 min followed by quenching to 250 °C in salt bath. In the IInd step, after quenching at 250 °C, the salt bath was gradually heated to 350 °C, 400 °C and 450 °C respectively where specimen were soaked for 120 min. The tensile strength and impact strength were evaluated according to ASTM standards. The results were compared with that obtained by conventional austempering process by quenching directly into salt bath at 400 °C for 120 min. Both tensile and impact strength were found to have improved by two step austempering process. During Ist stage of austempering, martensite was observed while during IInd stage of austempering microstructures revealed acicular ferrite and carbon stabilized austenite. The fractographic examination revealed mixed type of fracture mode and intergranular fracture was seen under SEM. It was further observed that the tensile strength decreased whereas the impact strength increased with IInd stage of austempering temperature.     

Accuracy of palpation and percussion manoeuvres in the diagnosis of splenomegaly

A study was conducted on 80 patients admitted in a teaching hospital to see the accuracy of two palpatory methods (Supine palpation and Middleton's manoeuvre) and three percussion methods (Traube's space percussion, Castell's and Nixon's manoeuvres) in the diagnosis of splenomegaly. Ultrasonographic findings were considered as gold standard for diagnosing splenomegaly. Mean age of study subjects was 31.5 years and mean Quetelet's index was 17.8 +/- 2.6 kg/m2. Sensitivity of Middleton's and Castell's manoeuvres was similar (85.7%) and higher than other manoeuvres. Nixon's manoeuvre had the least sensitivity (66.7%). Specificity was highest (92.1%) with supine palpation and least (31.6%) with Castell's manoeuvre. Supine palpation showed highest positive predictive value (91.7%). Receiver Operating Characteristics curves showed greater area with middleton's manoeuvre (0.93) followed by supine palpation (0.92), Castell's manoeuvre (0.75) and Traube's space percussion (0.74), the findings of the study suggests that palpatory methods like Middeton's manoeuvre and Supine palpation should be routinely used for diagnosing splenomegaly among non-obese individuals.     

A HYBRID INTELLIGENT MODEL BASED ON EVOLUTIONARY FUZZY CLUSTERING AND SYNDICATE NEURAL NETWORKS

In this article, a new hybrid intelligent model comprising a cluster allocation and adaptation component is developed for solving classification and pattern recognition problems. Its computation ability has been verified through various benchmark problems and biometric applications. The proposed model consists of two components: cluster distribution and adaptation. In the first module, mean patterns are distributed into the number of clusters based on the evolutionary fuzzy clustering, which is the basis for network structure selection in next module. In the second module, training and subsequent generalization is performed by the syndicate neural networks (SNN). The number of SNNs required in the second module will be same as the number of clusters. Whereas each network contains as many output neurons as the maximum number of members assigned to each cluster. The proposed novel fusion of evolutionary fuzzy clustering with a neural network yields superior performance in classification and pattern recognition problems. Performance evaluation has been carried out over a wide spectrum of benchmark problems and real-life biometric recognition problems with noise and occlusion. Experimental results demonstrate the efficacy of the methodology over existing ones.     

Eu（Ⅲ） Indirect Probe to Investigate Interaction of DOPA （3, 4, Di-Hydroxyphenylalanine） and Dopamine （3, 4-Dihydroxy Phenyl Ethyl Amine） Using Electrochemical Methods

Eu（ Ⅲ ） can be utilized as an indirect electrochemical probe to investigate the interaction of bio-molecules such as DOPA and Dopamine with Ca（ Ⅱ ） in vitro. The interaction of DOPA and Dopamine with Eu（ Ⅲ ）-Eu（ Ⅱ ） redox pair was investigated by electrochemical techniques. Both the neurotransmitters are structurally related and undergo interaction with Eu （Ⅲ ）. Eu （ Ⅲ ） coordinates with DOPA and Dopamine through five-member chelate tings via carboxylic oxygen and amino nitrogen. The electrode kinetic parameters viz, transfer coefficient （αna）, diffusion coefficient （D）, forward heterogeneous rate constant （ k^0 fh） were evaluated for Eu（ Ⅲ ）-DOPA/Eu（ Ⅲ ）-Dopamine. The results obtained were used to investigate the nature of interaction of Eu （Ⅲ） with muhi-donor biomolecules. The possible mechanism was also proposed.     

Defects in molecular beam epitaxial GaAs grown at low temperatures

We have utilized a variable energy positron beam and infrared transmission spectroscopy to study defects in GaAs epilayers grown at low temperatures (LT-GaAs) by molecular beam epitaxy. We have measured the Doppler broadening of the positron-electron annihilation gamma ray spectra as a function of positron implantation energy. From these measurements, we have obtained results for the depth profiles of Ga monovacancies in unannealed LT-GaAs and Ga monovacancies and arsenic cluster related defects in annealed LT-GaAs. We have also studied the effects of the Si impurities in annealed LT-GaAs. The infrared transmission measurements on unannealed LT-GaAs furnish a broad defect band, related to As antisites, centered at 0.370 eV below the conduction band.     

Dual role of grass clippings as buffering agent and biomass during anaerobic co-digestion with food waste

Clean Technologies and Environmental Policy - There is a dire need to replace the chemical buffers that regulate the redox environment in single-stage anaerobic digestion of food waste. Hence, the...     

Low temperature preparation of nanocrystalline solid solution of strontium barium niobate by chemical process

Sr_xBa_1-xNb₂O₆ (with x = 0.4, 0.5 and 0.6) powders have been prepared by thermolysis of aqueous precursor solutions consisting of triethanolamine (TEA), niobium tartarate and, EDTA complexes of strontium and barium ions. Complete evaporation of the precursor solution by heating at ∼ 200°C, yields in a fluffy, mesoporous carbon rich precursor material, which on calcination at 750°C/2 h has resulted in the pure SBN powders. The crystallite and average particle sizes are found to be around 15 nm and 20 nm, respectively.     

The effect of high energy mechanochemical processing on the microstructure, piezoelectric, ferroelectric and mechanical properties of PLZT ceramics

Lead lanthanum zirconate titanate (PLZT) ceramics were synthesized using a high energy mechanochemical processing technique, using tungsten carbide grinding vials and balls. The ceramic powders were prepared using the constituent oxide powders, which were subjected to high energy milling, without the use of any excess PbO in the starting composition. TEM studies revealed the formation of very fine particles of the order of 30?nm, due to the milling effect. Highly dense ceramics could be prepared via sintering which resulted in ultra-high strains in these piezoelectric samples of up to 0.25%, a value which has not been reported hitherto by any other known process. The effect of the reduction in particle size on the microstructure, mechanical and electrical properties of PLZT ceramics were studied and are discussed herein.     

Design and development of nanoemulsion drug delivery system of amlodipine besilate for improvement of oral bioavailability

Nanoemulsion (NE) of amlodipine besilate (AB) was developed by spontaneous emulsification method with the aim to enhance the solubility and oral bioavailability of AB and to achieve localized delivery of drug at target site. Pseudoternary phase diagrams were constructed to identify the NE region. The selected formulations from NE region were subjected to droplet size analysis, partitioning study and in vitro drug release. The partition coefficient was calculated and correlated with percent dissolution efficiency as a tool to predict in vitro drug release from NEs. The release of drug from NEs was significantly higher (p < 0.01) than the marketed tablet formulation. The optimal formulation contained 15% Labrafil M, 35% [Tween 80: ethanol (2:1)], and 50% by weight aqueous phase (NE3) was characterized by transmission electron microscopy (TEM) and for thermodynamic stability. The pharmacokinetics and biodistribution studies of the optimized radiolabeled formulation (99mTc-labeled) in mice (p.o.) demonstrated a relative bioavailability of 475% against AB suspension. In almost all the tested organs, the uptake of AB from NE was significantly higher (p < 0.05) than AB suspension especially in heart with a drug targeting index of 44.1%, also confirming the efficacy of nanosized formulation at therapeutic site. A three times increase in the overall residence time of NE further signifies the advantage of NEs as drug carriers for enhancing bioavailability of AB.